mbox series

[v9,0/4] Add support for secure regions in NAND

Message ID 20210401151508.143075-1-manivannan.sadhasivam@linaro.org
Headers show
Series Add support for secure regions in NAND | expand

Message

Manivannan Sadhasivam April 1, 2021, 3:15 p.m. UTC
On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So this series adds a property for declaring such secure regions in DT
so that the driver can skip touching them. While at it, the Qcom NANDc
DT binding is also converted to YAML format.

Thanks,
Mani

Changes in v9:

Based on review comments from Miquel:

* Fixed the secure-regions check
* Renamed the function to nand_region_is_secured() and used bool return
* Moved the parsing function to nand_scan()

* Added a patch to fix nand_cleanup in qcom driver

Changes in v8:

* Reworked the secure region check logic based on input from Boris
* Removed the check where unnecessary in rawnand core.

Changes in v7:

* Made "size" u64 and fixed a warning reported by Kernel test bot

Changes in v6:

* Made use of "size" of the regions for comparision
* Used "secure" instead of "sec"
* Fixed the sizeof parameter in of_get_nand_secure_regions()

Changes in v5:

* Switched to "uint64-matrix" as suggested by Rob
* Moved the whole logic from qcom driver to nand core as suggested by Boris

Changes in v4:

* Used "uint32-matrix" instead of "uint32-array" as per Rob's review.
* Collected Rob's review tag for binding conversion patch

Changes in v3:

* Removed the nand prefix from DT property and moved the property parsing
  logic before nand_scan() in driver.

Changes in v2:

* Moved the secure-regions property to generic NAND binding as a NAND
  chip property and renamed it as "nand-secure-regions".

Manivannan Sadhasivam (4):
  dt-bindings: mtd: Convert Qcom NANDc binding to YAML
  dt-bindings: mtd: Add a property to declare secure regions in NAND
    chips
  mtd: rawnand: Add support for secure regions in NAND memory
  mtd: rawnand: qcom: Add missing nand_cleanup() in error path

 .../bindings/mtd/nand-controller.yaml         |   7 +
 .../devicetree/bindings/mtd/qcom,nandc.yaml   | 196 ++++++++++++++++++
 .../devicetree/bindings/mtd/qcom_nandc.txt    | 142 -------------
 drivers/mtd/nand/raw/nand_base.c              | 107 +++++++++-
 drivers/mtd/nand/raw/qcom_nandc.c             |   1 +
 include/linux/mtd/rawnand.h                   |  14 ++
 6 files changed, 324 insertions(+), 143 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
 delete mode 100644 Documentation/devicetree/bindings/mtd/qcom_nandc.txt

-- 
2.25.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/