mbox series

[v2,00/10] serial: st-asc: Allow handling of RTS line

Message ID 20170127172804.23881-1-lee.jones@linaro.org
Headers show
Series serial: st-asc: Allow handling of RTS line | expand

Message

Lee Jones Jan. 27, 2017, 5:27 p.m. UTC 
When hardware flow-control is disabled, manual toggling of the UART's
reset line (RTS) using userland applications (e.g. stty) is not
possible, since the ASC IP does not provide this functionality in the
same was as some other IPs do.  Thus, we have to do this manually.

This set ensures the correct Pinctrl groups are configured and
obtained for both manual toggling of the RTS line and for the IP to
take over the lines when HW flow-control is requested by the user. 

Lee Jones (10):
  serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled
  serial: st-asc: Provide RTS functionality
  serial: st-asc: Read in all Pinctrl states
  serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles
  serial: st-asc: Use generic DT binding for announcing RTS/CTS lines
  dt-bindings: serial: Update 'uart-has-rtscts' description
  ARM: dts: STiH410-b2260: Identify the UART RTS line
  ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control
  ARM: dts: STiH407-family: Use new Pinctrl groups
  ARM: dts: STiH410-b2260: Enable HW flow-control

 .../devicetree/bindings/serial/serial.txt          |   3 +-
 arch/arm/boot/dts/stih407-family.dtsi              |   3 +-
 arch/arm/boot/dts/stih407-pinctrl.dtsi             |  12 ++-
 arch/arm/boot/dts/stih410-b2260.dts                |   5 +
 drivers/tty/serial/st-asc.c                        | 101 +++++++++++++++++++--
 5 files changed, 110 insertions(+), 14 deletions(-)

-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Greg Kroah-Hartman Feb. 2, 2017, 9:55 a.m. UTC | #1 
On Thu, Feb 02, 2017 at 07:42:36AM +0000, Lee Jones wrote:
> Hi Greg, Jiri,

> 

> > When hardware flow-control is disabled, manual toggling of the UART's

> > reset line (RTS) using userland applications (e.g. stty) is not

> > possible, since the ASC IP does not provide this functionality in the

> > same was as some other IPs do.  Thus, we have to do this manually.

> > 

> > This set ensures the correct Pinctrl groups are configured and

> > obtained for both manual toggling of the RTS line and for the IP to

> > take over the lines when HW flow-control is requested by the user. 

> > 

> > Lee Jones (10):

> >   serial: st-asc: Ignore the parity error bit if 8-bit mode is enabled

> >   serial: st-asc: Provide RTS functionality

> >   serial: st-asc: Read in all Pinctrl states

> >   serial: st-asc: (De)Register GPIOD and swap Pinctrl profiles

> >   serial: st-asc: Use generic DT binding for announcing RTS/CTS lines

> >   dt-bindings: serial: Update 'uart-has-rtscts' description

> >   ARM: dts: STiH410-b2260: Identify the UART RTS line

> >   ARM: dts: STiH407-pinctrl: Add Pinctrl group for HW flow-control

> >   ARM: dts: STiH407-family: Use new Pinctrl groups

> >   ARM: dts: STiH410-b2260: Enable HW flow-control

> > 

> >  .../devicetree/bindings/serial/serial.txt          |   3 +-

> >  arch/arm/boot/dts/stih407-family.dtsi              |   3 +-

> >  arch/arm/boot/dts/stih407-pinctrl.dtsi             |  12 ++-

> >  arch/arm/boot/dts/stih410-b2260.dts                |   5 +

> >  drivers/tty/serial/st-asc.c                        | 101 +++++++++++++++++++--

> >  5 files changed, 110 insertions(+), 14 deletions(-)

> 

> Looks like everyone is happy with the set.

> 

> Are you planning to merge it?


I'll take it in my next round of patches, give me a few days to sync up,
I normally do serial patches once a week or so.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html