@@ -1,5 +1,5 @@
/*********************************************************************
- *
+ *
* Filename: w83977af_ir.c
* Version: 1.0
* Description: FIR driver for the Winbond W83977AF Super I/O chip
@@ -8,31 +8,31 @@
* Created at: Wed Nov 4 11:46:16 1998
* Modified at: Fri Jan 28 12:10:59 2000
* Modified by: Dag Brattli <dagb@cs.uit.no>
- *
+ *
* Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
* Copyright (c) 1998-1999 Rebel.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
- *
+ *
* Neither Paul VanderSpek nor Rebel.com admit liability nor provide
* warranty for any of this software. This material is provided "AS-IS"
* and at no charge.
- *
+ *
* If you find bugs in this file, its very likely that the same bug
* will also be in pc87108.c since the implementations are quite
* similar.
*
* Notice that all functions that needs to access the chip in _any_
- * way, must save BSR register on entry, and restore it on exit.
+ * way, must save BSR register on entry, and restore it on exit.
* It is _very_ important to follow this policy!
*
* __u8 bank;
- *
+ *
* bank = inb( iobase+BSR);
- *
+ *
* do_your_stuff_here();
*
* outb( bank, iobase+BSR);
@@ -63,7 +63,7 @@
#include "w83977af_ir.h"
#define CONFIG_USE_W977_PNP /* Currently needed */
-#define PIO_MAX_SPEED 115200
+#define PIO_MAX_SPEED 115200
static char *driver_name = "w83977af_ir";
static int qos_mtt_bits = 0x07; /* 1 ms or more */
@@ -83,11 +83,11 @@ static unsigned int efio = W977_EFIO_BASE;
static struct w83977af_ir *dev_self[] = { NULL, NULL, NULL, NULL};
/* Some prototypes */
-static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
+static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
unsigned int dma);
static int w83977af_close(struct w83977af_ir *self);
static int w83977af_probe(int iobase, int irq, int dma);
-static int w83977af_dma_receive(struct w83977af_ir *self);
+static int w83977af_dma_receive(struct w83977af_ir *self);
static int w83977af_dma_receive_complete(struct w83977af_ir *self);
static netdev_tx_t w83977af_hard_xmit(struct sk_buff *skb,
struct net_device *dev);
@@ -108,7 +108,7 @@ static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd
*/
static int __init w83977af_init(void)
{
- int i;
+ int i;
for (i=0; i < ARRAY_SIZE(dev_self) && io[i] < 2000; i++) {
if (w83977af_open(i, io[i], irq[i], dma[i]) == 0)
@@ -150,7 +150,7 @@ static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
unsigned int dma)
{
struct net_device *dev;
- struct w83977af_ir *self;
+ struct w83977af_ir *self;
int err;
/* Lock the port that we need */
@@ -177,18 +177,18 @@ static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
self = netdev_priv(dev);
spin_lock_init(&self->lock);
-
+
/* Initialize IO */
- self->io.fir_base = iobase;
- self->io.irq = irq;
- self->io.fir_ext = CHIP_IO_EXTENT;
- self->io.dma = dma;
- self->io.fifo_size = 32;
+ self->io.fir_base = iobase;
+ self->io.irq = irq;
+ self->io.fir_ext = CHIP_IO_EXTENT;
+ self->io.dma = dma;
+ self->io.fifo_size = 32;
/* Initialize QoS for this device */
irda_init_max_qos_capabilies(&self->qos);
-
+
/* The only value we must override it the baudrate */
/* FIXME: The HP HDLS-1100 does not support 1152000! */
@@ -198,11 +198,11 @@ static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
/* The HP HDLS-1100 needs 1 ms according to the specs */
self->qos.min_turn_time.bits = qos_mtt_bits;
irda_qos_bits_to_value(&self->qos);
-
+
/* Max DMA buffer size needed = (data_size + 6) * (window_size) + 6; */
- self->rx_buff.truesize = 14384;
+ self->rx_buff.truesize = 14384;
self->tx_buff.truesize = 4000;
-
+
/* Allocate memory if needed */
self->rx_buff.head =
dma_zalloc_coherent(NULL, self->rx_buff.truesize,
@@ -238,12 +238,12 @@ static int w83977af_open(int i, unsigned int iobase, unsigned int irq,
/* Need to store self somewhere */
dev_self[i] = self;
-
+
return 0;
err_out3:
dma_free_coherent(NULL, self->tx_buff.truesize,
self->tx_buff.head, self->tx_buff_dma);
-err_out2:
+err_out2:
dma_free_coherent(NULL, self->rx_buff.truesize,
self->rx_buff.head, self->rx_buff_dma);
err_out1:
@@ -288,7 +288,7 @@ static int w83977af_close(struct w83977af_ir *self)
if (self->tx_buff.head)
dma_free_coherent(NULL, self->tx_buff.truesize,
self->tx_buff.head, self->tx_buff_dma);
-
+
if (self->rx_buff.head)
dma_free_coherent(NULL, self->rx_buff.truesize,
self->rx_buff.head, self->rx_buff_dma);
@@ -300,106 +300,106 @@ static int w83977af_close(struct w83977af_ir *self)
static int w83977af_probe(int iobase, int irq, int dma)
{
- int version;
+ int version;
int i;
-
- for (i=0; i < 2; i++) {
+
+ for (i=0; i < 2; i++) {
#ifdef CONFIG_USE_W977_PNP
- /* Enter PnP configuration mode */
+ /* Enter PnP configuration mode */
w977_efm_enter(efbase[i]);
-
- w977_select_device(W977_DEVICE_IR, efbase[i]);
-
- /* Configure PnP port, IRQ, and DMA channel */
- w977_write_reg(0x60, (iobase >> 8) & 0xff, efbase[i]);
- w977_write_reg(0x61, (iobase) & 0xff, efbase[i]);
-
- w977_write_reg(0x70, irq, efbase[i]);
+
+ w977_select_device(W977_DEVICE_IR, efbase[i]);
+
+ /* Configure PnP port, IRQ, and DMA channel */
+ w977_write_reg(0x60, (iobase >> 8) & 0xff, efbase[i]);
+ w977_write_reg(0x61, (iobase) & 0xff, efbase[i]);
+
+ w977_write_reg(0x70, irq, efbase[i]);
#ifdef CONFIG_ARCH_NETWINDER
/* Netwinder uses 1 higher than Linux */
- w977_write_reg(0x74, dma+1, efbase[i]);
+ w977_write_reg(0x74, dma+1, efbase[i]);
#else
- w977_write_reg(0x74, dma, efbase[i]);
+ w977_write_reg(0x74, dma, efbase[i]);
#endif /* CONFIG_ARCH_NETWINDER */
- w977_write_reg(0x75, 0x04, efbase[i]); /* Disable Tx DMA */
-
- /* Set append hardware CRC, enable IR bank selection */
- w977_write_reg(0xf0, APEDCRC|ENBNKSEL, efbase[i]);
-
- /* Activate device */
- w977_write_reg(0x30, 0x01, efbase[i]);
-
- w977_efm_exit(efbase[i]);
+ w977_write_reg(0x75, 0x04, efbase[i]);/* Disable Tx DMA */
+
+ /* Set append hardware CRC, enable IR bank selection */
+ w977_write_reg(0xf0, APEDCRC | ENBNKSEL, efbase[i]);
+
+ /* Activate device */
+ w977_write_reg(0x30, 0x01, efbase[i]);
+
+ w977_efm_exit(efbase[i]);
#endif /* CONFIG_USE_W977_PNP */
- /* Disable Advanced mode */
- switch_bank(iobase, SET2);
- outb(iobase+2, 0x00);
-
- /* Turn on UART (global) interrupts */
- switch_bank(iobase, SET0);
- outb(HCR_EN_IRQ, iobase+HCR);
-
- /* Switch to advanced mode */
- switch_bank(iobase, SET2);
- outb(inb(iobase+ADCR1) | ADCR1_ADV_SL, iobase+ADCR1);
-
- /* Set default IR-mode */
- switch_bank(iobase, SET0);
- outb(HCR_SIR, iobase+HCR);
-
- /* Read the Advanced IR ID */
- switch_bank(iobase, SET3);
- version = inb(iobase+AUID);
-
- /* Should be 0x1? */
- if (0x10 == (version & 0xf0)) {
- efio = efbase[i];
-
- /* Set FIFO size to 32 */
- switch_bank(iobase, SET2);
- outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
-
- /* Set FIFO threshold to TX17, RX16 */
- switch_bank(iobase, SET0);
- outb(UFR_RXTL|UFR_TXTL|UFR_TXF_RST|UFR_RXF_RST|
+ /* Disable Advanced mode */
+ switch_bank(iobase, SET2);
+ outb(iobase+2, 0x00);
+
+ /* Turn on UART (global) interrupts */
+ switch_bank(iobase, SET0);
+ outb(HCR_EN_IRQ, iobase+HCR);
+
+ /* Switch to advanced mode */
+ switch_bank(iobase, SET2);
+ outb(inb(iobase+ADCR1) | ADCR1_ADV_SL, iobase+ADCR1);
+
+ /* Set default IR-mode */
+ switch_bank(iobase, SET0);
+ outb(HCR_SIR, iobase+HCR);
+
+ /* Read the Advanced IR ID */
+ switch_bank(iobase, SET3);
+ version = inb(iobase+AUID);
+
+ /* Should be 0x1? */
+ if (0x10 == (version & 0xf0)) {
+ efio = efbase[i];
+
+ /* Set FIFO size to 32 */
+ switch_bank(iobase, SET2);
+ outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
+
+ /* Set FIFO threshold to TX17, RX16 */
+ switch_bank(iobase, SET0);
+ outb(UFR_RXTL|UFR_TXTL|UFR_TXF_RST|UFR_RXF_RST|
UFR_EN_FIFO,iobase+UFR);
-
- /* Receiver frame length */
- switch_bank(iobase, SET4);
+
+ /* Receiver frame length */
+ switch_bank(iobase, SET4);
outb(2048 & 0xff, iobase+6);
outb((2048 >> 8) & 0x1f, iobase+7);
- /*
- * Init HP HSDL-1100 transceiver.
- *
- * Set IRX_MSL since we have 2 * receive paths IRRX,
- * and IRRXH. Clear IRSL0D since we want IRSL0 * to
- * be a input pin used for IRRXH
+ /*
+ * Init HP HSDL-1100 transceiver.
*
- * IRRX pin 37 connected to receiver
+ * Set IRX_MSL since we have 2 * receive paths IRRX,
+ * and IRRXH. Clear IRSL0D since we want IRSL0 * to
+ * be a input pin used for IRRXH
+ *
+ * IRRX pin 37 connected to receiver
* IRTX pin 38 connected to transmitter
- * FIRRX pin 39 connected to receiver (IRSL0)
+ * FIRRX pin 39 connected to receiver (IRSL0)
* CIRRX pin 40 connected to pin 37
*/
switch_bank(iobase, SET7);
outb(0x40, iobase+7);
-
+
net_info_ratelimited("W83977AF (IR) driver loaded. Version: 0x%02x\n",
version);
-
+
return 0;
} else {
/* Try next extented function register address */
pr_debug("%s(), Wrong chip version", __func__);
}
- }
+ }
return -1;
}
static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
{
int ir_mode = HCR_SIR;
- int iobase;
+ int iobase;
__u8 set;
iobase = self->io.fir_base;
@@ -448,8 +448,8 @@ static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
/* set FIFO size to 32 */
switch_bank(iobase, SET2);
- outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
-
+ outb(ADCR2_RXFS32|ADCR2_TXFS32, iobase+ADCR2);
+
/* set FIFO threshold to TX17, RX16 */
switch_bank(iobase, SET0);
outb(0x00, iobase+UFR); /* Reset */
@@ -457,7 +457,7 @@ static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
outb(0xa7, iobase+UFR);
netif_wake_queue(self->netdev);
-
+
/* Enable some interrupts so we can receive frames */
switch_bank(iobase, SET0);
if (speed > PIO_MAX_SPEED) {
@@ -465,7 +465,7 @@ static void w83977af_change_speed(struct w83977af_ir *self, __u32 speed)
w83977af_dma_receive(self);
} else
outb(ICR_ERBRI, iobase+ICR);
-
+
/* Restore SSR */
outb(set, iobase+SSR);
}
@@ -484,23 +484,23 @@ static netdev_tx_t w83977af_hard_xmit(struct sk_buff *skb,
int iobase;
__u8 set;
int mtt;
-
+
self = netdev_priv(dev);
iobase = self->io.fir_base;
pr_debug("%s(%ld), skb->len=%d\n", __func__ , jiffies,
(int)skb->len);
-
+
/* Lock transmit buffer */
netif_stop_queue(dev);
-
+
/* Check if we need to change the speed */
speed = irda_get_next_speed(skb);
if ((speed != self->io.speed) && (speed != -1)) {
/* Check for empty frame */
if (!skb->len) {
- w83977af_change_speed(self, speed);
+ w83977af_change_speed(self, speed);
dev_kfree_skb(skb);
return NETDEV_TX_OK;
} else
@@ -509,29 +509,29 @@ static netdev_tx_t w83977af_hard_xmit(struct sk_buff *skb,
/* Save current set */
set = inb(iobase+SSR);
-
+
/* Decide if we should use PIO or DMA transfer */
if (self->io.speed > PIO_MAX_SPEED) {
self->tx_buff.data = self->tx_buff.head;
skb_copy_from_linear_data(skb, self->tx_buff.data, skb->len);
self->tx_buff.len = skb->len;
-
+
mtt = irda_get_mtt(skb);
pr_debug("%s(%ld), mtt=%d\n", __func__ , jiffies, mtt);
- if (mtt > 1000)
- mdelay(mtt/1000);
- else if (mtt)
- udelay(mtt);
+ if (mtt > 1000)
+ mdelay(mtt/1000);
+ else if (mtt)
+ udelay(mtt);
- /* Enable DMA interrupt */
- switch_bank(iobase, SET0);
- outb(ICR_EDMAI, iobase+ICR);
- w83977af_dma_write(self, iobase);
+ /* Enable DMA interrupt */
+ switch_bank(iobase, SET0);
+ outb(ICR_EDMAI, iobase+ICR);
+ w83977af_dma_write(self, iobase);
} else {
self->tx_buff.data = self->tx_buff.head;
- self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
+ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data,
self->tx_buff.truesize);
-
+
/* Add interrupt on tx low level (will fire immediately) */
switch_bank(iobase, SET0);
outb(ICR_ETXTHI, iobase+ICR);
@@ -562,15 +562,15 @@ static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
switch_bank(iobase, SET0);
outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
- /* Choose transmit DMA channel */
+ /* Choose transmit DMA channel */
switch_bank(iobase, SET2);
outb(ADCR1_D_CHSW|/*ADCR1_DMA_F|*/ADCR1_ADV_SL, iobase+ADCR1);
irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len,
- DMA_MODE_WRITE);
+ DMA_MODE_WRITE);
self->io.direction = IO_XMIT;
-
+
/* Enable DMA */
- switch_bank(iobase, SET0);
+ switch_bank(iobase, SET0);
outb(inb(iobase+HCR) | HCR_EN_DMA | HCR_TX_WT, iobase+HCR);
/* Restore set register */
@@ -580,14 +580,14 @@ static void w83977af_dma_write(struct w83977af_ir *self, int iobase)
/*
* Function w83977af_pio_write (iobase, buf, len, fifo_size)
*
- *
+ *
*
*/
static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
{
int actual = 0;
__u8 set;
-
+
/* Save current bank */
set = inb(iobase+SSR);
@@ -605,7 +605,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
/* Transmit next byte */
outb(buf[actual++], iobase+TBR);
}
-
+
pr_debug("%s(), fifo_size %d ; %d sent of %d\n",
__func__ , fifo_size, actual, len);
@@ -620,7 +620,7 @@ static int w83977af_pio_write(int iobase, __u8 *buf, int len, int fifo_size)
*
* The transfer of a frame in finished. So do the necessary things
*
- *
+ *
*/
static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
{
@@ -639,11 +639,11 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
/* Disable DMA */
switch_bank(iobase, SET0);
outb(inb(iobase+HCR) & ~HCR_EN_DMA, iobase+HCR);
-
+
/* Check for underrun! */
if (inb(iobase+AUDR) & AUDR_UNDR) {
pr_debug("%s(), Transmit underrun!\n", __func__);
-
+
self->netdev->stats.tx_errors++;
self->netdev->stats.tx_fifo_errors++;
@@ -652,7 +652,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
} else
self->netdev->stats.tx_packets++;
-
+
if (self->new_speed) {
w83977af_change_speed(self, self->new_speed);
self->new_speed = 0;
@@ -661,7 +661,7 @@ static void w83977af_dma_xmit_complete(struct w83977af_ir *self)
/* Unlock tx_buff and request another frame */
/* Tell the network layer, that we want more frames */
netif_wake_queue(self->netdev);
-
+
/* Restore set */
outb(set, iobase+SSR);
}
@@ -714,15 +714,15 @@ static int w83977af_dma_receive(struct w83977af_ir *self)
irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize,
DMA_MODE_READ);
#endif
- /*
- * Reset Rx FIFO. This will also flush the ST_FIFO, it's very
+ /*
+ * Reset Rx FIFO. This will also flush the ST_FIFO, it's very
* important that we don't reset the Tx FIFO since it might not
* be finished transmitting yet
*/
switch_bank(iobase, SET0);
outb(UFR_RXTL|UFR_TXTL|UFR_RXF_RST|UFR_EN_FIFO, iobase+UFR);
self->st_fifo.len = self->st_fifo.tail = self->st_fifo.head = 0;
-
+
/* Enable DMA */
switch_bank(iobase, SET0);
#ifdef CONFIG_ARCH_NETWINDER
@@ -730,7 +730,7 @@ static int w83977af_dma_receive(struct w83977af_ir *self)
outb(hcr | HCR_EN_DMA, iobase+HCR);
enable_dma(self->io.dma);
spin_unlock_irqrestore(&self->lock, flags);
-#else
+#else
outb(inb(iobase+HCR) | HCR_EN_DMA, iobase+HCR);
#endif
/* Restore set */
@@ -762,21 +762,21 @@ static int w83977af_dma_receive_complete(struct w83977af_ir *self)
/* Save current set */
set = inb(iobase+SSR);
-
+
iobase = self->io.fir_base;
/* Read status FIFO */
switch_bank(iobase, SET5);
while ((status = inb(iobase+FS_FO)) & FS_FO_FSFDR) {
st_fifo->entries[st_fifo->tail].status = status;
-
+
st_fifo->entries[st_fifo->tail].len = inb(iobase+RFLFL);
st_fifo->entries[st_fifo->tail].len |= inb(iobase+RFLFH) << 8;
-
+
st_fifo->tail++;
st_fifo->len++;
}
-
+
while (st_fifo->len) {
/* Get first entry */
status = st_fifo->entries[st_fifo->head].status;
@@ -792,32 +792,32 @@ static int w83977af_dma_receive_complete(struct w83977af_ir *self)
} else {
/* Skip frame */
self->netdev->stats.rx_errors++;
-
+
self->rx_buff.data += len;
-
+
if (status & FS_FO_MX_LEX)
self->netdev->stats.rx_length_errors++;
-
- if (status & FS_FO_PHY_ERR)
+
+ if (status & FS_FO_PHY_ERR)
self->netdev->stats.rx_frame_errors++;
-
- if (status & FS_FO_CRC_ERR)
+
+ if (status & FS_FO_CRC_ERR)
self->netdev->stats.rx_crc_errors++;
}
/* The errors below can be reported in both cases */
if (status & FS_FO_RX_OV)
self->netdev->stats.rx_fifo_errors++;
-
+
if (status & FS_FO_FSF_OV)
self->netdev->stats.rx_fifo_errors++;
-
+
} else {
/* Check if we have transferred all data to memory */
switch_bank(iobase, SET0);
if (inb(iobase+USR) & USR_RDR) {
udelay(80); /* Should be enough!? */
}
-
+
skb = dev_alloc_skb(len+1);
if (skb == NULL) {
printk(KERN_INFO
@@ -827,10 +827,10 @@ static int w83977af_dma_receive_complete(struct w83977af_ir *self)
return FALSE;
}
-
+
/* Align to 20 bytes */
- skb_reserve(skb, 1);
-
+ skb_reserve(skb, 1);
+
/* Copy frame without CRC */
if (self->io.speed < 4000000) {
skb_put(skb, len-2);
@@ -847,7 +847,7 @@ static int w83977af_dma_receive_complete(struct w83977af_ir *self)
/* Move to next frame */
self->rx_buff.data += len;
self->netdev->stats.rx_packets++;
-
+
skb->dev = self->netdev;
skb_reset_mac_header(skb);
skb->protocol = htons(ETH_P_IRDA);
@@ -866,21 +866,21 @@ static int w83977af_dma_receive_complete(struct w83977af_ir *self)
* Receive all data in receiver FIFO
*
*/
-static void w83977af_pio_receive(struct w83977af_ir *self)
+static void w83977af_pio_receive(struct w83977af_ir *self)
{
__u8 byte = 0x00;
int iobase;
IRDA_ASSERT(self != NULL, return;);
-
+
iobase = self->io.fir_base;
-
+
/* Receive all characters in Rx FIFO */
do {
byte = inb(iobase+RBR);
async_unwrap_char(self->netdev, &self->netdev->stats, &self->rx_buff,
byte);
- } while (inb(iobase+USR) & USR_RDR); /* Data available */
+ } while (inb(iobase+USR) & USR_RDR); /* Data available */
}
/*
@@ -897,19 +897,19 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
int iobase;
pr_debug("%s(), isr=%#x\n", __func__ , isr);
-
+
iobase = self->io.fir_base;
/* Transmit FIFO low on data */
if (isr & ISR_TXTH_I) {
/* Write data left in transmit buffer */
- actual = w83977af_pio_write(self->io.fir_base,
- self->tx_buff.data,
- self->tx_buff.len,
+ actual = w83977af_pio_write(self->io.fir_base,
+ self->tx_buff.data,
+ self->tx_buff.len,
self->io.fifo_size);
self->tx_buff.data += actual;
self->tx_buff.len -= actual;
-
+
self->io.direction = IO_XMIT;
/* Check if finished */
@@ -919,7 +919,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
set = inb(iobase+SSR);
switch_bank(iobase, SET0);
outb(AUDR_SFEND, iobase+AUDR);
- outb(set, iobase+SSR);
+ outb(set, iobase+SSR);
self->netdev->stats.tx_packets++;
@@ -929,7 +929,7 @@ static __u8 w83977af_sir_interrupt(struct w83977af_ir *self, int isr)
}
}
/* Check if transmission has completed */
- if (isr & ISR_TXEMP_I) {
+ if (isr & ISR_TXEMP_I) {
/* Check if we need to change the speed? */
if (self->new_speed) {
pr_debug("%s(), Changing speed!\n", __func__);
@@ -966,11 +966,11 @@ static __u8 w83977af_fir_interrupt(struct w83977af_ir *self, int isr)
iobase = self->io.fir_base;
set = inb(iobase+SSR);
-
+
/* End of frame detected in FIFO */
if (isr & (ISR_FEND_I|ISR_FSF_I)) {
if (w83977af_dma_receive_complete(self)) {
-
+
/* Wait for next status FIFO interrupt */
new_icr |= ICR_EFSFI;
} else {
@@ -995,7 +995,7 @@ static __u8 w83977af_fir_interrupt(struct w83977af_ir *self, int isr)
/* Clear timer event */
/* switch_bank(iobase, SET0); */
-/* outb(ASCR_CTE, iobase+ASCR); */
+/* outb(ASCR_CTE, iobase+ASCR); */
/* Check if this is a TX timer interrupt */
if (self->io.direction == IO_XMIT) {
@@ -1008,23 +1008,23 @@ static __u8 w83977af_fir_interrupt(struct w83977af_ir *self, int isr)
new_icr |= ICR_EFSFI;
}
- }
+ }
/* Finished with DMA */
if (isr & ISR_DMA_I) {
w83977af_dma_xmit_complete(self);
/* Check if there are more frames to be transmitted */
/* if (irda_device_txqueue_empty(self)) { */
-
- /* Prepare for receive
- *
+
+ /* Prepare for receive
+ *
* ** Netwinder Tx DMA likes that we do this anyway **
*/
w83977af_dma_receive(self);
new_icr = ICR_EFSFI;
- /* } */
+ /* } */
}
-
+
/* Restore set */
outb(set, iobase+SSR);
@@ -1051,12 +1051,12 @@ static irqreturn_t w83977af_interrupt(int irq, void *dev_id)
/* Save current bank */
set = inb(iobase+SSR);
switch_bank(iobase, SET0);
-
- icr = inb(iobase+ICR);
- isr = inb(iobase+ISR) & icr; /* Mask out the interesting ones */
+
+ icr = inb(iobase+ICR);
+ isr = inb(iobase+ISR) & icr; /* Mask out the interesting ones */
outb(0, iobase+ICR); /* Disable interrupts */
-
+
if (isr) {
/* Dispatch interrupt handler for the current speed */
if (self->io.speed > PIO_MAX_SPEED )
@@ -1095,9 +1095,9 @@ static int w83977af_is_receiving(struct w83977af_ir *self)
status = TRUE;
}
outb(set, iobase+SSR);
- } else
+ } else
status = (self->rx_buff.state != OUTSIDE_FRAME);
-
+
return status;
}
@@ -1113,16 +1113,16 @@ static int w83977af_net_open(struct net_device *dev)
int iobase;
char hwname[32];
__u8 set;
-
-
+
+
IRDA_ASSERT(dev != NULL, return -1;);
self = netdev_priv(dev);
-
+
IRDA_ASSERT(self != NULL, return 0;);
-
+
iobase = self->io.fir_base;
- if (request_irq(self->io.irq, w83977af_interrupt, 0, dev->name,
+ if (request_irq(self->io.irq, w83977af_interrupt, 0, dev->name,
(void *) dev)) {
return -EAGAIN;
}
@@ -1134,30 +1134,30 @@ static int w83977af_net_open(struct net_device *dev)
free_irq(self->io.irq, dev);
return -EAGAIN;
}
-
+
/* Save current set */
set = inb(iobase+SSR);
- /* Enable some interrupts so we can receive frames again */
- switch_bank(iobase, SET0);
- if (self->io.speed > 115200) {
- outb(ICR_EFSFI, iobase+ICR);
- w83977af_dma_receive(self);
- } else
- outb(ICR_ERBRI, iobase+ICR);
+ /* Enable some interrupts so we can receive frames again */
+ switch_bank(iobase, SET0);
+ if (self->io.speed > 115200) {
+ outb(ICR_EFSFI, iobase+ICR);
+ w83977af_dma_receive(self);
+ } else
+ outb(ICR_ERBRI, iobase+ICR);
/* Restore bank register */
outb(set, iobase+SSR);
/* Ready to play! */
netif_start_queue(dev);
-
+
/* Give self a hardware name */
sprintf(hwname, "w83977af @ 0x%03x", self->io.fir_base);
- /*
+ /*
* Open new IrLAP layer instance, now that everything should be
- * initialized properly
+ * initialized properly
*/
self->irlap = irlap_open(dev, &self->qos, hwname);
@@ -1177,16 +1177,16 @@ static int w83977af_net_close(struct net_device *dev)
__u8 set;
IRDA_ASSERT(dev != NULL, return -1;);
-
+
self = netdev_priv(dev);
-
+
IRDA_ASSERT(self != NULL, return 0;);
-
+
iobase = self->io.fir_base;
/* Stop device */
netif_stop_queue(dev);
-
+
/* Stop and remove instance of IrLAP */
if (self->irlap)
irlap_close(self->irlap);
@@ -1196,10 +1196,10 @@ static int w83977af_net_close(struct net_device *dev)
/* Save current set */
set = inb(iobase+SSR);
-
+
/* Disable interrupts */
switch_bank(iobase, SET0);
- outb(0, iobase+ICR);
+ outb(0, iobase+ICR);
free_irq(self->io.irq, dev);
free_dma(self->io.dma);
@@ -1230,7 +1230,7 @@ static int w83977af_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
IRDA_ASSERT(self != NULL, return -1;);
pr_debug("%s(), %s, (cmd=0x%X)\n", __func__ , dev->name, cmd);
-
+
spin_lock_irqsave(&self->lock, flags);
switch (cmd) {
@@ -1274,7 +1274,7 @@ MODULE_PARM_DESC(irq, "IRQ lines");
/*
* Function init_module (void)
*
- *
+ *
*
*/
module_init(w83977af_init);
@@ -1282,7 +1282,7 @@ module_init(w83977af_init);
/*
* Function cleanup_module (void)
*
- *
+ *
*
*/
module_exit(w83977af_cleanup);
As David Miller pointed out for for the previous patch, the whitespace in some functions looks rather odd. This was caused by commit 6329da5f258a ("obsolete config in kernel source: USE_INTERNAL_TIMER"), which removed some conditions but did not reindent the code. This fixes the indentation in the file and removes extraneous whitespace at the end of the lines and before tabs. There are many other minor coding style problems in the driver, but I'm not touching those here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- drivers/net/irda/w83977af_ir.c | 404 ++++++++++++++++++++--------------------- 1 file changed, 202 insertions(+), 202 deletions(-) -- 2.9.0