diff mbox series

[v4,07/23] mtd: nand: denali: set NAND_ECC_CUSTOM_PAGE_ACCESS

Message ID 1496704922-12261-8-git-send-email-yamada.masahiro@socionext.com
State Superseded
Headers show
Series mtd: nand: denali: Denali NAND IP patch bomb | expand

Commit Message

Masahiro Yamada June 5, 2017, 11:21 p.m. UTC
The denali_cmdfunc() actually does nothing valuable for
NAND_CMD_{PAGEPROG,READ0,SEQIN}.

For NAND_CMD_{READ0,SEQIN}, it copies "page" to "denali->page", then
denali_read_page() and denali_read_page_raw() compare them to check
if the NAND framework called the callbacks in correct order.
(Inconsistently, this check is missing from the denali_write_page()
and denali_write_page_raw().)

The framework is widely tested by many drivers, so this kind of
sanity check is unneeded.  The Denali controller is equipped with
high level interface for read/write, so let's skip unneeded call
of cmdfunc().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

Changes in v4: None
Changes in v3: None
Changes in v2:
  - Newly added

 drivers/mtd/nand/denali.c | 29 ++++++++---------------------
 1 file changed, 8 insertions(+), 21 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index 422b6e4..3655284 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -998,7 +998,7 @@  static void denali_setup_dma(struct denali_nand_info *denali, int op)
  * configuration details.
  */
 static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, bool raw_xfer)
+			const uint8_t *buf, int page, bool raw_xfer)
 {
 	struct denali_nand_info *denali = mtd_to_denali(mtd);
 	dma_addr_t addr = denali->buf.dma_buf;
@@ -1006,6 +1006,8 @@  static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	uint32_t irq_status;
 	uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL;
 
+	denali->page = page;
+
 	/*
 	 * if it is a raw xfer, we want to disable ecc and send the spare area.
 	 * !raw_xfer - enable ecc
@@ -1059,7 +1061,7 @@  static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
 	 * for regular page writes, we let HW handle all the ECC
 	 * data written to the device.
 	 */
-	return write_page(mtd, chip, buf, false);
+	return write_page(mtd, chip, buf, page, false);
 }
 
 /*
@@ -1075,7 +1077,7 @@  static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	 * for raw page writes, we want to disable ECC and simply write
 	 * whatever data is in the buffer.
 	 */
-	return write_page(mtd, chip, buf, true);
+	return write_page(mtd, chip, buf, page, true);
 }
 
 static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
@@ -1105,12 +1107,7 @@  static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
 	unsigned long uncor_ecc_flags = 0;
 	int stat = 0;
 
-	if (page != denali->page) {
-		dev_err(denali->dev,
-			"IN %s: page %d is not equal to denali->page %d",
-			__func__, page, denali->page);
-		BUG();
-	}
+	denali->page = page;
 
 	setup_ecc_for_xfer(denali, true, false);
 
@@ -1154,12 +1151,7 @@  static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
 	size_t size = mtd->writesize + mtd->oobsize;
 	uint32_t irq_mask = INTR__DMA_CMD_COMP;
 
-	if (page != denali->page) {
-		dev_err(denali->dev,
-			"IN %s: page %d is not equal to denali->page %d",
-			__func__, page, denali->page);
-		BUG();
-	}
+	denali->page = page;
 
 	setup_ecc_for_xfer(denali, false, true);
 	denali_enable_dma(denali, true);
@@ -1238,8 +1230,6 @@  static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
 	int i;
 
 	switch (cmd) {
-	case NAND_CMD_PAGEPROG:
-		break;
 	case NAND_CMD_STATUS:
 		read_status(denali);
 		break;
@@ -1259,10 +1249,6 @@  static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
 			write_byte_to_buf(denali, id);
 		}
 		break;
-	case NAND_CMD_READ0:
-	case NAND_CMD_SEQIN:
-		denali->page = page;
-		break;
 	case NAND_CMD_RESET:
 		reset_bank(denali);
 		break;
@@ -1619,6 +1605,7 @@  int denali_init(struct denali_nand_info *denali)
 
 	mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
 
+	chip->ecc.options |= NAND_ECC_CUSTOM_PAGE_ACCESS;
 	chip->ecc.read_page = denali_read_page;
 	chip->ecc.read_page_raw = denali_read_page_raw;
 	chip->ecc.write_page = denali_write_page;