diff mbox

Applied "ASoC: Intel: add bytct-rt5651 machine driver" to the asoc tree

Message ID E1aGVjO-00036V-GP@debutante
State New
Headers show

Commit Message

Mark Brown Jan. 5, 2016, 5:49 p.m. UTC
The patch

   ASoC: Intel: add bytct-rt5651 machine driver

has been applied to the asoc tree at

   git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git 

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From 2bd5bd15a51858866d792c678f0fe9280c4e8fa7 Mon Sep 17 00:00:00 2001
From: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

Date: Mon, 4 Jan 2016 17:20:24 -0600
Subject: [PATCH] ASoC: Intel: add bytct-rt5651 machine driver

based on bytcr-rt5640 with changes only on codec side
Quirk logic is kept as placeholder.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>

Signed-off-by: Mark Brown <broonie@kernel.org>

---
 sound/soc/intel/Kconfig               |  12 ++
 sound/soc/intel/atom/sst/sst_acpi.c   |   3 +
 sound/soc/intel/boards/Makefile       |   2 +
 sound/soc/intel/boards/bytcr_rt5651.c | 332 ++++++++++++++++++++++++++++++++++
 4 files changed, 349 insertions(+)
 create mode 100644 sound/soc/intel/boards/bytcr_rt5651.c

-- 
2.7.0.rc3

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
diff mbox

Patch

diff --git a/sound/soc/intel/Kconfig b/sound/soc/intel/Kconfig
index 337e178c1acb..803f95e40679 100644
--- a/sound/soc/intel/Kconfig
+++ b/sound/soc/intel/Kconfig
@@ -103,6 +103,18 @@  config SND_SOC_INTEL_BYTCR_RT5640_MACH
           Say Y if you have such a device
           If unsure select "N".
 
+config SND_SOC_INTEL_BYTCR_RT5651_MACH
+        tristate "ASoC Audio driver for Intel Baytrail and Baytrail-CR with RT5651 codec"
+	depends on X86 && I2C
+	select SND_SOC_RT5651
+	select SND_SST_MFLD_PLATFORM
+	select SND_SST_IPC_ACPI
+	help
+          This adds support for ASoC machine driver for Intel(R) Baytrail and Baytrail-CR
+          platforms with RT5651 audio codec.
+          Say Y if you have such a device
+          If unsure select "N".
+
 config SND_SOC_INTEL_CHT_BSW_RT5672_MACH
         tristate "ASoC Audio driver for Intel Cherrytrail & Braswell with RT5672 codec"
         depends on X86_INTEL_LPSS && I2C
diff --git a/sound/soc/intel/atom/sst/sst_acpi.c b/sound/soc/intel/atom/sst/sst_acpi.c
index f424460b917e..b6ea0a58f9d3 100644
--- a/sound/soc/intel/atom/sst/sst_acpi.c
+++ b/sound/soc/intel/atom/sst/sst_acpi.c
@@ -316,6 +316,9 @@  static int sst_acpi_remove(struct platform_device *pdev)
 static struct sst_acpi_mach sst_acpi_bytcr[] = {
 	{"10EC5640", "bytcr_rt5640", "intel/fw_sst_0f28.bin", "bytcr_rt5640", NULL,
 						&byt_rvp_platform_data },
+	{"10EC5651", "bytcr_rt5651", "intel/fw_sst_0f28.bin", "bytcr_rt5651", NULL,
+						&byt_rvp_platform_data },
+
 	{},
 };
 
diff --git a/sound/soc/intel/boards/Makefile b/sound/soc/intel/boards/Makefile
index 2485ea9434ad..3310c0f9c356 100644
--- a/sound/soc/intel/boards/Makefile
+++ b/sound/soc/intel/boards/Makefile
@@ -3,6 +3,7 @@  snd-soc-sst-byt-rt5640-mach-objs := byt-rt5640.o
 snd-soc-sst-byt-max98090-mach-objs := byt-max98090.o
 snd-soc-sst-broadwell-objs := broadwell.o
 snd-soc-sst-bytcr-rt5640-objs := bytcr_rt5640.o
+snd-soc-sst-bytcr-rt5651-objs := bytcr_rt5651.o
 snd-soc-sst-cht-bsw-rt5672-objs := cht_bsw_rt5672.o
 snd-soc-sst-cht-bsw-rt5645-objs := cht_bsw_rt5645.o
 snd-soc-sst-cht-bsw-max98090_ti-objs := cht_bsw_max98090_ti.o
@@ -15,6 +16,7 @@  obj-$(CONFIG_SND_SOC_INTEL_BYT_RT5640_MACH) += snd-soc-sst-byt-rt5640-mach.o
 obj-$(CONFIG_SND_SOC_INTEL_BYT_MAX98090_MACH) += snd-soc-sst-byt-max98090-mach.o
 obj-$(CONFIG_SND_SOC_INTEL_BROADWELL_MACH) += snd-soc-sst-broadwell.o
 obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH) += snd-soc-sst-bytcr-rt5640.o
+obj-$(CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH) += snd-soc-sst-bytcr-rt5651.o
 obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH) += snd-soc-sst-cht-bsw-rt5672.o
 obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH) += snd-soc-sst-cht-bsw-rt5645.o
 obj-$(CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH) += snd-soc-sst-cht-bsw-max98090_ti.o
diff --git a/sound/soc/intel/boards/bytcr_rt5651.c b/sound/soc/intel/boards/bytcr_rt5651.c
new file mode 100644
index 000000000000..1c95ccc886c4
--- /dev/null
+++ b/sound/soc/intel/boards/bytcr_rt5651.c
@@ -0,0 +1,332 @@ 
+/*
+ *  bytcr_rt5651.c - ASoc Machine driver for Intel Byt CR platform
+ *  (derived from bytcr_rt5640.c)
+ *
+ *  Copyright (C) 2015 Intel Corp
+ *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ *
+ *  This program is distributed in the hope that it will be useful, but
+ *  WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+#include "../../codecs/rt5651.h"
+#include "../atom/sst-atom-controls.h"
+
+static const struct snd_soc_dapm_widget byt_rt5651_widgets[] = {
+	SND_SOC_DAPM_HP("Headphone", NULL),
+	SND_SOC_DAPM_MIC("Headset Mic", NULL),
+	SND_SOC_DAPM_MIC("Internal Mic", NULL),
+	SND_SOC_DAPM_SPK("Speaker", NULL),
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
+	{"AIF1 Playback", NULL, "ssp2 Tx"},
+	{"ssp2 Tx", NULL, "codec_out0"},
+	{"ssp2 Tx", NULL, "codec_out1"},
+	{"codec_in0", NULL, "ssp2 Rx"},
+	{"codec_in1", NULL, "ssp2 Rx"},
+	{"ssp2 Rx", NULL, "AIF1 Capture"},
+
+	{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */
+	{"IN2P", NULL, "Headset Mic"},
+	{"Headphone", NULL, "HPOL"},
+	{"Headphone", NULL, "HPOR"},
+	{"Speaker", NULL, "LOUTL"},
+	{"Speaker", NULL, "LOUTR"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic1_map[] = {
+	{"DMIC1", NULL, "Internal Mic"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_intmic_dmic2_map[] = {
+	{"DMIC2", NULL, "Internal Mic"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_intmic_in1_map[] = {
+	{"Internal Mic", NULL, "micbias1"},
+	{"IN1P", NULL, "Internal Mic"},
+};
+
+enum {
+	BYT_RT5651_DMIC1_MAP,
+	BYT_RT5651_DMIC2_MAP,
+	BYT_RT5651_IN1_MAP,
+};
+
+#define BYT_RT5651_MAP(quirk)	((quirk) & 0xff)
+#define BYT_RT5651_DMIC_EN	BIT(16)
+
+static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC1_MAP |
+					BYT_RT5651_DMIC_EN;
+
+static const struct snd_kcontrol_new byt_rt5651_controls[] = {
+	SOC_DAPM_PIN_SWITCH("Headphone"),
+	SOC_DAPM_PIN_SWITCH("Headset Mic"),
+	SOC_DAPM_PIN_SWITCH("Internal Mic"),
+	SOC_DAPM_PIN_SWITCH("Speaker"),
+};
+
+static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
+					struct snd_pcm_hw_params *params)
+{
+	struct snd_soc_pcm_runtime *rtd = substream->private_data;
+	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	int ret;
+
+	snd_soc_dai_set_bclk_ratio(codec_dai, 50);
+
+	ret = snd_soc_dai_set_sysclk(codec_dai, RT5651_SCLK_S_PLL1,
+				     params_rate(params) * 512,
+				     SND_SOC_CLOCK_IN);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec clock %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_pll(codec_dai, 0, RT5651_PLL1_S_BCLK1,
+				  params_rate(params) * 50,
+				  params_rate(params) * 512);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set codec pll: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct dmi_system_id byt_rt5651_quirk_table[] = {
+	{}
+};
+
+static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
+{
+	int ret;
+	struct snd_soc_card *card = runtime->card;
+	const struct snd_soc_dapm_route *custom_map;
+	int num_routes;
+
+	card->dapm.idle_bias_off = true;
+
+	dmi_check_system(byt_rt5651_quirk_table);
+	switch (BYT_RT5651_MAP(byt_rt5651_quirk)) {
+	case BYT_RT5651_IN1_MAP:
+		custom_map = byt_rt5651_intmic_in1_map;
+		num_routes = ARRAY_SIZE(byt_rt5651_intmic_in1_map);
+		break;
+	case BYT_RT5651_DMIC2_MAP:
+		custom_map = byt_rt5651_intmic_dmic2_map;
+		num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic2_map);
+		break;
+	default:
+		custom_map = byt_rt5651_intmic_dmic1_map;
+		num_routes = ARRAY_SIZE(byt_rt5651_intmic_dmic1_map);
+	}
+
+	ret = snd_soc_add_card_controls(card, byt_rt5651_controls,
+					ARRAY_SIZE(byt_rt5651_controls));
+	if (ret) {
+		dev_err(card->dev, "unable to add card controls\n");
+		return ret;
+	}
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Headphone");
+	snd_soc_dapm_ignore_suspend(&card->dapm, "Speaker");
+
+	return ret;
+}
+
+static const struct snd_soc_pcm_stream byt_rt5651_dai_params = {
+	.formats = SNDRV_PCM_FMTBIT_S24_LE,
+	.rate_min = 48000,
+	.rate_max = 48000,
+	.channels_min = 2,
+	.channels_max = 2,
+};
+
+static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
+			    struct snd_pcm_hw_params *params)
+{
+	struct snd_interval *rate = hw_param_interval(params,
+			SNDRV_PCM_HW_PARAM_RATE);
+	struct snd_interval *channels = hw_param_interval(params,
+						SNDRV_PCM_HW_PARAM_CHANNELS);
+	int ret;
+
+	/* The DSP will covert the FE rate to 48k, stereo, 24bits */
+	rate->min = rate->max = 48000;
+	channels->min = channels->max = 2;
+
+	/* set SSP2 to 24-bit */
+	params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+
+	/*
+	 * Default mode for SSP configuration is TDM 4 slot, override config
+	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
+	 * dai_set_tdm_slot() since there is no other API exposed
+	 */
+	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
+				  SND_SOC_DAIFMT_I2S     |
+				  SND_SOC_DAIFMT_NB_IF   |
+				  SND_SOC_DAIFMT_CBS_CFS
+				  );
+
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set format to I2S, err %d\n", ret);
+		return ret;
+	}
+
+	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+	if (ret < 0) {
+		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static unsigned int rates_48000[] = {
+	48000,
+};
+
+static struct snd_pcm_hw_constraint_list constraints_48000 = {
+	.count = ARRAY_SIZE(rates_48000),
+	.list  = rates_48000,
+};
+
+static int byt_rt5651_aif1_startup(struct snd_pcm_substream *substream)
+{
+	return snd_pcm_hw_constraint_list(substream->runtime, 0,
+			SNDRV_PCM_HW_PARAM_RATE,
+			&constraints_48000);
+}
+
+static struct snd_soc_ops byt_rt5651_aif1_ops = {
+	.startup = byt_rt5651_aif1_startup,
+};
+
+static struct snd_soc_ops byt_rt5651_be_ssp2_ops = {
+	.hw_params = byt_rt5651_aif1_hw_params,
+};
+
+static struct snd_soc_dai_link byt_rt5651_dais[] = {
+	[MERR_DPCM_AUDIO] = {
+		.name = "Audio Port",
+		.stream_name = "Audio",
+		.cpu_dai_name = "media-cpu-dai",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.codec_name = "snd-soc-dummy",
+		.platform_name = "sst-mfld-platform",
+		.ignore_suspend = 1,
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.ops = &byt_rt5651_aif1_ops,
+	},
+	[MERR_DPCM_DEEP_BUFFER] = {
+		.name = "Deep-Buffer Audio Port",
+		.stream_name = "Deep-Buffer Audio",
+		.cpu_dai_name = "deepbuffer-cpu-dai",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.codec_name = "snd-soc-dummy",
+		.platform_name = "sst-mfld-platform",
+		.ignore_suspend = 1,
+		.nonatomic = true,
+		.dynamic = 1,
+		.dpcm_playback = 1,
+		.ops = &byt_rt5651_aif1_ops,
+	},
+	[MERR_DPCM_COMPR] = {
+		.name = "Compressed Port",
+		.stream_name = "Compress",
+		.cpu_dai_name = "compress-cpu-dai",
+		.codec_dai_name = "snd-soc-dummy-dai",
+		.codec_name = "snd-soc-dummy",
+		.platform_name = "sst-mfld-platform",
+	},
+	/* CODEC<->CODEC link */
+	/* back ends */
+	{
+		.name = "SSP2-Codec",
+		.be_id = 1,
+		.cpu_dai_name = "ssp2-port",
+		.platform_name = "sst-mfld-platform",
+		.no_pcm = 1,
+		.codec_dai_name = "rt5651-aif1",
+		.codec_name = "i2c-10EC5651:00",
+		.dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF
+						| SND_SOC_DAIFMT_CBS_CFS,
+		.be_hw_params_fixup = byt_rt5651_codec_fixup,
+		.ignore_suspend = 1,
+		.nonatomic = true,
+		.dpcm_playback = 1,
+		.dpcm_capture = 1,
+		.init = byt_rt5651_init,
+		.ops = &byt_rt5651_be_ssp2_ops,
+	},
+};
+
+/* SoC card */
+static struct snd_soc_card byt_rt5651_card = {
+	.name = "bytcr-rt5651",
+	.owner = THIS_MODULE,
+	.dai_link = byt_rt5651_dais,
+	.num_links = ARRAY_SIZE(byt_rt5651_dais),
+	.dapm_widgets = byt_rt5651_widgets,
+	.num_dapm_widgets = ARRAY_SIZE(byt_rt5651_widgets),
+	.dapm_routes = byt_rt5651_audio_map,
+	.num_dapm_routes = ARRAY_SIZE(byt_rt5651_audio_map),
+	.fully_routed = true,
+};
+
+static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
+{
+	int ret_val = 0;
+
+	/* register the soc card */
+	byt_rt5651_card.dev = &pdev->dev;
+
+	ret_val = devm_snd_soc_register_card(&pdev->dev, &byt_rt5651_card);
+
+	if (ret_val) {
+		dev_err(&pdev->dev, "devm_snd_soc_register_card failed %d\n",
+			ret_val);
+		return ret_val;
+	}
+	platform_set_drvdata(pdev, &byt_rt5651_card);
+	return ret_val;
+}
+
+static struct platform_driver snd_byt_rt5651_mc_driver = {
+	.driver = {
+		.name = "bytcr_rt5651",
+		.pm = &snd_soc_pm_ops,
+	},
+	.probe = snd_byt_rt5651_mc_probe,
+};
+
+module_platform_driver(snd_byt_rt5651_mc_driver);
+
+MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver for RT5651");
+MODULE_AUTHOR("Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bytcr_rt5651");