@@ -12,6 +12,6 @@ obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \
board-mop500-uib.o board-mop500-stuib.o \
board-mop500-u8500uib.o \
board-mop500-pins.o \
- board-mop500-msp.o
+ board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
new file mode 100644
@@ -0,0 +1,199 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License terms: GNU General Public License (GPL), version 2
+ */
+
+#include <linux/platform_device.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/pinctrl/consumer.h>
+
+#include <plat/gpio-nomadik.h>
+#include <plat/pincfg.h>
+#include <plat/ste_dma40.h>
+
+#include <mach/devices.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/msp.h>
+
+#include "ste-dma40-db8500.h"
+#include "board-mop500.h"
+#include "devices-db8500.h"
+#include "pins-db8500.h"
+
+static struct stedma40_chan_cfg msp0_dma_rx = {
+ .high_priority = true,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+
+ .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp0_dma_tx = {
+ .high_priority = true,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+
+ .src_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+struct msp_i2s_platform_data msp0_platform_data = {
+ .id = MSP_I2S_0,
+ .msp_i2s_dma_rx = &msp0_dma_rx,
+ .msp_i2s_dma_tx = &msp0_dma_tx,
+};
+
+static struct stedma40_chan_cfg msp1_dma_rx = {
+ .high_priority = true,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+
+ .src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp1_dma_tx = {
+ .high_priority = true,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+
+ .src_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ /* data_width is set during configuration */
+};
+
+struct msp_i2s_platform_data msp1_platform_data = {
+ .id = MSP_I2S_1,
+ .msp_i2s_dma_rx = NULL,
+ .msp_i2s_dma_tx = &msp1_dma_tx,
+};
+
+static struct stedma40_chan_cfg msp2_dma_rx = {
+ .high_priority = true,
+ .dir = STEDMA40_PERIPH_TO_MEM,
+
+ .src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
+ .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
+
+ /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
+ .src_info.psize = STEDMA40_PSIZE_LOG_1,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_1,
+
+ /* data_width is set during configuration */
+};
+
+static struct stedma40_chan_cfg msp2_dma_tx = {
+ .high_priority = true,
+ .dir = STEDMA40_MEM_TO_PERIPH,
+
+ .src_dev_type = STEDMA40_DEV_DST_MEMORY,
+ .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
+
+ .src_info.psize = STEDMA40_PSIZE_LOG_4,
+ .dst_info.psize = STEDMA40_PSIZE_LOG_4,
+
+ .use_fixed_channel = true,
+ .phy_channel = 1,
+
+ /* data_width is set during configuration */
+};
+
+static struct platform_device *db8500_add_msp_i2s(struct device *parent,
+ int id,
+ resource_size_t base, int irq,
+ struct msp_i2s_platform_data *pdata)
+{
+ struct platform_device *pdev;
+ struct resource res[] = {
+ DEFINE_RES_MEM(base, SZ_4K),
+ DEFINE_RES_IRQ(irq),
+ };
+
+ pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
+ id, irq);
+ pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
+ res, ARRAY_SIZE(res),
+ pdata, sizeof(*pdata));
+ if (!pdev) {
+ pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
+ id);
+ return NULL;
+ }
+
+ return pdev;
+}
+
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+ .name = "snd-soc-mop500",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+/* Platform device for Ux500-PCM */
+static struct platform_device ux500_pcm = {
+ .name = "ux500-pcm",
+ .id = 0,
+ .dev = {
+ .platform_data = NULL,
+ },
+};
+
+struct msp_i2s_platform_data msp2_platform_data = {
+ .id = MSP_I2S_2,
+ .msp_i2s_dma_rx = &msp2_dma_rx,
+ .msp_i2s_dma_tx = &msp2_dma_tx,
+};
+
+struct msp_i2s_platform_data msp3_platform_data = {
+ .id = MSP_I2S_3,
+ .msp_i2s_dma_rx = &msp1_dma_rx,
+ .msp_i2s_dma_tx = NULL,
+};
+
+void mop500_audio_init(struct device *parent)
+{
+ pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+ platform_device_register(&snd_soc_mop500);
+
+ pr_info("Initialize MSP I2S-devices.\n");
+ db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
+ &msp0_platform_data);
+ db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
+ &msp1_platform_data);
+ db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
+ &msp2_platform_data);
+ db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
+ &msp3_platform_data);
+
+ pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
+ platform_device_register(&ux500_pcm);
+}
+
+/* Due for removal once the MSP driver has been fully DT:ed. */
+void mop500_of_audio_init(struct device *parent)
+{
+ pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
+ platform_device_register(&ux500_pcm);
+}
deleted file mode 100644
@@ -1,199 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/pinctrl/consumer.h>
-
-#include <plat/gpio-nomadik.h>
-#include <plat/pincfg.h>
-#include <plat/ste_dma40.h>
-
-#include <mach/devices.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/msp.h>
-
-#include "ste-dma40-db8500.h"
-#include "board-mop500.h"
-#include "devices-db8500.h"
-#include "pins-db8500.h"
-
-static struct stedma40_chan_cfg msp0_dma_rx = {
- .high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV31_MSP0_RX_SLIM0_CH0_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
-};
-
-static struct stedma40_chan_cfg msp0_dma_tx = {
- .high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV31_MSP0_TX_SLIM0_CH0_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
-};
-
-struct msp_i2s_platform_data msp0_platform_data = {
- .id = MSP_I2S_0,
- .msp_i2s_dma_rx = &msp0_dma_rx,
- .msp_i2s_dma_tx = &msp0_dma_tx,
-};
-
-static struct stedma40_chan_cfg msp1_dma_rx = {
- .high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV30_MSP3_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
-};
-
-static struct stedma40_chan_cfg msp1_dma_tx = {
- .high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV30_MSP1_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- /* data_width is set during configuration */
-};
-
-struct msp_i2s_platform_data msp1_platform_data = {
- .id = MSP_I2S_1,
- .msp_i2s_dma_rx = NULL,
- .msp_i2s_dma_tx = &msp1_dma_tx,
-};
-
-static struct stedma40_chan_cfg msp2_dma_rx = {
- .high_priority = true,
- .dir = STEDMA40_PERIPH_TO_MEM,
-
- .src_dev_type = DB8500_DMA_DEV14_MSP2_RX,
- .dst_dev_type = STEDMA40_DEV_DST_MEMORY,
-
- /* MSP2 DMA doesn't work with PSIZE == 4 on DB8500v2 */
- .src_info.psize = STEDMA40_PSIZE_LOG_1,
- .dst_info.psize = STEDMA40_PSIZE_LOG_1,
-
- /* data_width is set during configuration */
-};
-
-static struct stedma40_chan_cfg msp2_dma_tx = {
- .high_priority = true,
- .dir = STEDMA40_MEM_TO_PERIPH,
-
- .src_dev_type = STEDMA40_DEV_DST_MEMORY,
- .dst_dev_type = DB8500_DMA_DEV14_MSP2_TX,
-
- .src_info.psize = STEDMA40_PSIZE_LOG_4,
- .dst_info.psize = STEDMA40_PSIZE_LOG_4,
-
- .use_fixed_channel = true,
- .phy_channel = 1,
-
- /* data_width is set during configuration */
-};
-
-static struct platform_device *db8500_add_msp_i2s(struct device *parent,
- int id,
- resource_size_t base, int irq,
- struct msp_i2s_platform_data *pdata)
-{
- struct platform_device *pdev;
- struct resource res[] = {
- DEFINE_RES_MEM(base, SZ_4K),
- DEFINE_RES_IRQ(irq),
- };
-
- pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
- id, irq);
- pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
- res, ARRAY_SIZE(res),
- pdata, sizeof(*pdata));
- if (!pdev) {
- pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
- id);
- return NULL;
- }
-
- return pdev;
-}
-
-/* Platform device for ASoC MOP500 machine */
-static struct platform_device snd_soc_mop500 = {
- .name = "snd-soc-mop500",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-/* Platform device for Ux500-PCM */
-static struct platform_device ux500_pcm = {
- .name = "ux500-pcm",
- .id = 0,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-struct msp_i2s_platform_data msp2_platform_data = {
- .id = MSP_I2S_2,
- .msp_i2s_dma_rx = &msp2_dma_rx,
- .msp_i2s_dma_tx = &msp2_dma_tx,
-};
-
-struct msp_i2s_platform_data msp3_platform_data = {
- .id = MSP_I2S_3,
- .msp_i2s_dma_rx = &msp1_dma_rx,
- .msp_i2s_dma_tx = NULL,
-};
-
-/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_msp_init(struct device *parent)
-{
- pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
- platform_device_register(&ux500_pcm);
-}
-
-void mop500_msp_init(struct device *parent)
-{
- pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
- platform_device_register(&snd_soc_mop500);
-
- pr_info("Initialize MSP I2S-devices.\n");
- db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
- &msp0_platform_data);
- db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
- &msp1_platform_data);
- db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
- &msp2_platform_data);
- db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
- &msp3_platform_data);
-
- pr_info("%s: Register platform-device 'ux500-pcm'\n", __func__);
- platform_device_register(&ux500_pcm);
-}
@@ -607,7 +607,7 @@ static void __init mop500_init_machine(void)
mop500_i2c_init(parent);
mop500_sdi_init(parent);
mop500_spi_init(parent);
- mop500_msp_init(parent);
+ mop500_audio_init(parent);
mop500_uart_init(parent);
u8500_cryp1_hash1_init(parent);
@@ -641,7 +641,7 @@ static void __init snowball_init_machine(void)
mop500_i2c_init(parent);
snowball_sdi_init(parent);
mop500_spi_init(parent);
- mop500_msp_init(parent);
+ mop500_audio_init(parent);
mop500_uart_init(parent);
/* This board has full regulator constraints */
@@ -673,7 +673,7 @@ static void __init hrefv60_init_machine(void)
mop500_i2c_init(parent);
hrefv60_sdi_init(parent);
mop500_spi_init(parent);
- mop500_msp_init(parent);
+ mop500_audio_init(parent);
mop500_uart_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
@@ -807,7 +807,7 @@ static void __init u8500_init_machine(void)
ARRAY_SIZE(mop500_platform_devs));
mop500_sdi_init(parent);
- mop500_msp_init(parent);
+ mop500_audio_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
i2c_register_board_info(2, mop500_i2c2_devices,
@@ -816,7 +816,7 @@ static void __init u8500_init_machine(void)
mop500_uib_init();
} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
- mop500_of_msp_init(parent);
+ mop500_of_audio_init(parent);
} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
/*
* The HREFv60 board removed a GPIO expander and routed
@@ -828,7 +828,7 @@ static void __init u8500_init_machine(void)
ARRAY_SIZE(mop500_platform_devs));
hrefv60_sdi_init(parent);
- mop500_msp_init(parent);
+ mop500_audio_init(parent);
i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
@@ -97,9 +97,9 @@ void __init mop500_stuib_init(void);
void __init mop500_pinmaps_init(void);
void __init snowball_pinmaps_init(void);
void __init hrefv60_pinmaps_init(void);
-void mop500_msp_init(struct device *parent);
+void mop500_audio_init(struct device *parent);
/* Due for removal once the MSP driver has been fully DT:ed. */
-void mop500_of_msp_init(struct device *parent);
+void mop500_of_audio_init(struct device *parent);
int __init mop500_uib_init(void);
void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,