diff mbox series

[1/4] drm/tve200: Add DT bindings

Message ID 20170813151132.24736-2-linus.walleij@linaro.org
State New
Headers show
Series [1/4] drm/tve200: Add DT bindings | expand

Commit Message

Linus Walleij Aug. 13, 2017, 3:11 p.m. UTC
This adds device tree bindings for the Faraday TVE200 IP block.
This IP block is present in the Gemini ARM SoC and also in some
Grain Media GMxxxx SoCs.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 .../devicetree/bindings/display/faraday,tve200.txt | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt

-- 
2.13.4

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Rob Herring Aug. 17, 2017, 8:46 p.m. UTC | #1
On Sun, Aug 13, 2017 at 05:11:29PM +0200, Linus Walleij wrote:
> This adds device tree bindings for the Faraday TVE200 IP block.

> This IP block is present in the Gemini ARM SoC and also in some

> Grain Media GMxxxx SoCs.

> 

> Cc: devicetree@vger.kernel.org

> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

> ---

>  .../devicetree/bindings/display/faraday,tve200.txt | 41 ++++++++++++++++++++++

>  1 file changed, 41 insertions(+)

>  create mode 100644 Documentation/devicetree/bindings/display/faraday,tve200.txt

> 

> diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt

> new file mode 100644

> index 000000000000..95d588fbb2f2

> --- /dev/null

> +++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt

> @@ -0,0 +1,41 @@

> +* Faraday TV Encoder TVE200

> +

> +Required properties:

> +

> +- compatible: must be one of:

> +	"faraday,tve200"

> +	"cortina,gemini-tvc", "faraday,tve200"

> +

> +- reg: base address and size of the control registers block

> +

> +- interrupts: contains an interrupt specifier for the interrupt

> +	line from the TVE200

> +

> +- clock-names: should contain "PCLK" for the clock line clocking the

> +	silicon and "TVE" for the 27MHz clock to the video driver

> +

> +- clocks: contains phandle and clock specifier pairs for the entries

> +	in the clock-names property. See

> +	Documentation/devicetree/bindings/clock/clock-bindings.txt

> +

> +Optional properties:

> +

> +- resets: contains the reset line phandle for the block

> +

> +Required sub-nodes:

> +

> +- port: describes LCD panel signals, following the common binding

> +	for video transmitter interfaces; see

> +	Documentation/devicetree/bindings/media/video-interfaces.txt


Need to explicitly list ports and endpoints.

Also, needs to be in the example as it is required.

> +

> +Example:

> +

> +tvc@6a000000 {


display-controller@...

> +	compatible = "faraday,tve200";

> +	reg = <0x6a000000 0x1000>;

> +	interrupts = <13 IRQ_TYPE_EDGE_RISING>;

> +	resets = <&syscon GEMINI_RESET_TVC>;

> +	clocks = <&syscon GEMINI_CLK_GATE_TVC>,

> +		 <&syscon GEMINI_CLK_TVC>;

> +	clock-names = "PCLK", "TVE";

> +};

> -- 

> 2.13.4

> 

> --

> To unsubscribe from this list: send the line "unsubscribe devicetree" in

> the body of a message to majordomo@vger.kernel.org

> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt
new file mode 100644
index 000000000000..95d588fbb2f2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt
@@ -0,0 +1,41 @@ 
+* Faraday TV Encoder TVE200
+
+Required properties:
+
+- compatible: must be one of:
+	"faraday,tve200"
+	"cortina,gemini-tvc", "faraday,tve200"
+
+- reg: base address and size of the control registers block
+
+- interrupts: contains an interrupt specifier for the interrupt
+	line from the TVE200
+
+- clock-names: should contain "PCLK" for the clock line clocking the
+	silicon and "TVE" for the 27MHz clock to the video driver
+
+- clocks: contains phandle and clock specifier pairs for the entries
+	in the clock-names property. See
+	Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Optional properties:
+
+- resets: contains the reset line phandle for the block
+
+Required sub-nodes:
+
+- port: describes LCD panel signals, following the common binding
+	for video transmitter interfaces; see
+	Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+
+tvc@6a000000 {
+	compatible = "faraday,tve200";
+	reg = <0x6a000000 0x1000>;
+	interrupts = <13 IRQ_TYPE_EDGE_RISING>;
+	resets = <&syscon GEMINI_RESET_TVC>;
+	clocks = <&syscon GEMINI_CLK_GATE_TVC>,
+		 <&syscon GEMINI_CLK_TVC>;
+	clock-names = "PCLK", "TVE";
+};