[2/2] ARM: dts: exynos4: allow i2c0 bus to be configured using pinctrl interface

Message ID 1346923381-14144-3-git-send-email-thomas.abraham@linaro.org
State New
Headers show

Commit Message

thomas.abraham@linaro.org Sept. 6, 2012, 9:23 a.m.
Add a default pin state for i2c0 controller which the pinctrl interface can
use to setup the i2c0 bus.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
---
 arch/arm/boot/dts/exynos4210-smdkv310.dts |    2 --
 arch/arm/boot/dts/exynos4210.dtsi         |    2 ++
 2 files changed, 2 insertions(+), 2 deletions(-)

Patch

diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 1beccc8..ea76542 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -126,8 +126,6 @@ 
 		#size-cells = <0>;
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-max-bus-freq = <20000>;
-		gpios = <&gpd1 0 2 3 0>,
-			<&gpd1 1 2 3 0>;
 
 		eeprom@50 {
 			compatible = "samsung,24ad0xd1";
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index a4bd0c9..e08387f 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -157,6 +157,8 @@ 
 		compatible = "samsung,s3c2440-i2c";
 		reg = <0x13860000 0x100>;
 		interrupts = <0 58 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c0_bus>;
 	};
 
 	i2c@13870000 {