diff mbox series

[v2,02/12] mtd: nand: denali: prefix detect_max_banks() with denali_

Message ID 1506052009-8285-3-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit 3ac6c7166396060c2b427668470e2e626c358a39
Headers show
Series mtd: nand: denali: more clean-ups | expand

Commit Message

Masahiro Yamada Sept. 22, 2017, 3:46 a.m. UTC
All functions in this driver are prefixed with denali_
except detect_max_banks().  Rename it for consistency.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

---

Changes in v2: None

 drivers/mtd/nand/denali.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-- 
2.7.4


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/
diff mbox series

Patch

diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
index d847ae4..48193f9 100644
--- a/drivers/mtd/nand/denali.c
+++ b/drivers/mtd/nand/denali.c
@@ -81,7 +81,7 @@  static void denali_host_write(struct denali_nand_info *denali,
  * Use the configuration feature register to determine the maximum number of
  * banks that the hardware supports.
  */
-static void detect_max_banks(struct denali_nand_info *denali)
+static void denali_detect_max_banks(struct denali_nand_info *denali)
 {
 	uint32_t features = ioread32(denali->reg + FEATURES);
 
@@ -1115,7 +1115,7 @@  static void denali_hw_init(struct denali_nand_info *denali)
 	 * if this value is 0, just let it be.
 	 */
 	denali->oob_skip_bytes = ioread32(denali->reg + SPARE_AREA_SKIP_BYTES);
-	detect_max_banks(denali);
+	denali_detect_max_banks(denali);
 	iowrite32(0x0F, denali->reg + RB_PIN_ENABLED);
 	iowrite32(CHIP_EN_DONT_CARE__FLAG, denali->reg + CHIP_ENABLE_DONT_CARE);