@@ -17,6 +17,7 @@
*
*/
+#include <linux/bitfield.h>
#include <linux/completion.h>
#include <linux/dma-mapping.h>
#include <linux/interrupt.h>
@@ -386,13 +387,6 @@ static int denali_hw_ecc_fixup(struct mtd_info *mtd,
return max_bitflips;
}
-#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
-#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
-#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
-#define ECC_ERROR_UNCORRECTABLE(x) ((x) & ERR_CORRECTION_INFO__ERROR_TYPE)
-#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
-#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
-
static int denali_sw_ecc_fixup(struct mtd_info *mtd,
struct denali_nand_info *denali,
unsigned long *uncor_ecc_flags, uint8_t *buf)
@@ -410,18 +404,20 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
do {
err_addr = ioread32(denali->reg + ECC_ERROR_ADDRESS);
- err_sector = ECC_SECTOR(err_addr);
- err_byte = ECC_BYTE(err_addr);
+ err_sector = FIELD_GET(ECC_ERROR_ADDRESS__SECTOR, err_addr);
+ err_byte = FIELD_GET(ECC_ERROR_ADDRESS__OFFSET, err_addr);
err_cor_info = ioread32(denali->reg + ERR_CORRECTION_INFO);
- err_cor_value = ECC_CORRECTION_VALUE(err_cor_info);
- err_device = ECC_ERR_DEVICE(err_cor_info);
+ err_cor_value = FIELD_GET(ERR_CORRECTION_INFO__BYTE,
+ err_cor_info);
+ err_device = FIELD_GET(ERR_CORRECTION_INFO__DEVICE,
+ err_cor_info);
/* reset the bitflip counter when crossing ECC sector */
if (err_sector != prev_sector)
bitflips = 0;
- if (ECC_ERROR_UNCORRECTABLE(err_cor_info)) {
+ if (err_cor_info & ERR_CORRECTION_INFO__UNCOR) {
/*
* Check later if this is a real ECC error, or
* an erased sector.
@@ -451,7 +447,7 @@ static int denali_sw_ecc_fixup(struct mtd_info *mtd,
}
prev_sector = err_sector;
- } while (!ECC_LAST_ERR(err_cor_info));
+ } while (!(err_cor_info & ERR_CORRECTION_INFO__LAST_ERR));
/*
* Once handle all ecc errors, controller will trigger a
@@ -1351,7 +1347,8 @@ int denali_init(struct denali_nand_info *denali)
"chosen ECC settings: step=%d, strength=%d, bytes=%d\n",
chip->ecc.size, chip->ecc.strength, chip->ecc.bytes);
- iowrite32(MAKE_ECC_CORRECTION(chip->ecc.strength, 1),
+ iowrite32(FIELD_PREP(ECC_CORRECTION__ERASE_THRESHOLD, 1) |
+ FIELD_PREP(ECC_CORRECTION__VALUE, chip->ecc.strength),
denali->reg + ECC_CORRECTION);
iowrite32(mtd->erasesize / mtd->writesize,
denali->reg + PAGES_PER_BLOCK);
@@ -114,9 +114,6 @@
#define ECC_CORRECTION 0x1b0
#define ECC_CORRECTION__VALUE GENMASK(4, 0)
#define ECC_CORRECTION__ERASE_THRESHOLD GENMASK(31, 16)
-#define MAKE_ECC_CORRECTION(val, thresh) \
- (((val) & (ECC_CORRECTION__VALUE)) | \
- (((thresh) << 16) & (ECC_CORRECTION__ERASE_THRESHOLD)))
#define READ_MODE 0x1c0
#define READ_MODE__VALUE GENMASK(3, 0)
@@ -258,13 +255,13 @@
#define ECC_ERROR_ADDRESS 0x630
#define ECC_ERROR_ADDRESS__OFFSET GENMASK(11, 0)
-#define ECC_ERROR_ADDRESS__SECTOR_NR GENMASK(15, 12)
+#define ECC_ERROR_ADDRESS__SECTOR GENMASK(15, 12)
#define ERR_CORRECTION_INFO 0x640
-#define ERR_CORRECTION_INFO__BYTEMASK GENMASK(7, 0)
-#define ERR_CORRECTION_INFO__DEVICE_NR GENMASK(11, 8)
-#define ERR_CORRECTION_INFO__ERROR_TYPE BIT(14)
-#define ERR_CORRECTION_INFO__LAST_ERR_INFO BIT(15)
+#define ERR_CORRECTION_INFO__BYTE GENMASK(7, 0)
+#define ERR_CORRECTION_INFO__DEVICE GENMASK(11, 8)
+#define ERR_CORRECTION_INFO__UNCOR BIT(14)
+#define ERR_CORRECTION_INFO__LAST_ERR BIT(15)
#define ECC_COR_INFO(bank) (0x650 + (bank) / 2 * 0x10)
#define ECC_COR_INFO__SHIFT(bank) ((bank) % 2 * 8)
All the register offsets and bitfield masks are defined in denali.h, but the driver code ended up with additional crappy macros such as MAKE_ECC_CORRECTION(), ECC_SECTOR(), etc. The reason is apparent - accessing a register field requires mask and shift pair. The denali.h only provides mask. However, defining both is tedious. <linux/bitfield.h> provides a convenient way to get register fields only with a single shifted mask. Now use it. While I am here, I shortened some macros. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- Changes in v2: None drivers/mtd/nand/denali.c | 25 +++++++++++-------------- drivers/mtd/nand/denali.h | 13 +++++-------- 2 files changed, 16 insertions(+), 22 deletions(-) -- 2.7.4 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/