@@ -176,6 +176,7 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
exynos5420-arndale-octa.dtb \
exynos5420-peach-pit.dtb \
exynos5420-smdk5420.dtb \
+ exynos5422-odroidhc1.dtb \
exynos5422-odroidxu3.dtb \
exynos5422-odroidxu3-lite.dtb \
exynos5422-odroidxu4.dtb \
new file mode 100644
@@ -0,0 +1,443 @@
+/*
+ * Hardkernel Odroid XU3/XU4/HC1 boards core device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2013-2017 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <dt-bindings/clock/samsung,s2mps11.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "exynos5800.dtsi"
+#include "exynos5422-cpus.dtsi"
+
+/ {
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x40000000 0x7EA00000>;
+ };
+
+ chosen {
+ stdout-path = "serial2:115200n8";
+ };
+
+ firmware@02073000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x02073000 0x1000>;
+ };
+
+ fixed-rate-clocks {
+ oscclk {
+ compatible = "samsung,exynos5420-oscclk";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&bus_wcore {
+ devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
+ <&nocp_mem1_0>, <&nocp_mem1_1>;
+ vdd-supply = <&buck3_reg>;
+ exynos,saturation-ratio = <100>;
+ status = "okay";
+};
+
+&bus_noc {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_fsys_apb {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_fsys {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_fsys2 {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_mfc {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_gen {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_peri {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_g2d {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_g2d_acp {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_jpeg {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_jpeg_apb {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_disp1_fimd {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_disp1 {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_gscl_scaler {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&bus_mscl {
+ devfreq = <&bus_wcore>;
+ status = "okay";
+};
+
+&cpu0 {
+ cpu-supply = <&buck6_reg>;
+};
+
+&cpu4 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&hsi2c_4 {
+ status = "okay";
+
+ s2mps11_pmic@66 {
+ compatible = "samsung,s2mps11-pmic";
+ reg = <0x66>;
+ samsung,s2mps11-acokb-ground;
+
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s2mps11_irq>;
+
+ s2mps11_osc: clocks {
+ #clock-cells = <1>;
+ clock-output-names = "s2mps11_ap",
+ "s2mps11_cp", "s2mps11_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_ldo1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "vddq_mmc0";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "vdd_adc";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "vdd_ldo5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_ldo6";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "vdd_ldo7";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "vdd_ldo8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "vdd_ldo9";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "vdd_ldo10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "vdd_ldo11";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "vdd_ldo12";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "vddq_mmc2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "vdd_ldo15";
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ regulator-always-on;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "vdd_ldo16";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ regulator-always-on;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "tsp_avdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "vdd_emmc_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "vdd_sd";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "tsp_io";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "vdd_ldo26";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "vdd_mem";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "vdd_kfc";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "vdd_1.0v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "vdd_1.8v_ldo";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_2.8v_ldo";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3750000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck10_reg: BUCK10 {
+ regulator-name = "vdd_vmem";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+};
+
+&mmc_2 {
+ status = "okay";
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <0 4>;
+ samsung,dw-mshc-ddr-timing = <0 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ vmmc-supply = <&ldo19_reg>;
+ vqmmc-supply = <&ldo13_reg>;
+};
+
+&nocp_mem0_0 {
+ status = "okay";
+};
+
+&nocp_mem0_1 {
+ status = "okay";
+};
+
+&nocp_mem1_0 {
+ status = "okay";
+};
+
+&nocp_mem1_1 {
+ status = "okay";
+};
+
+&pinctrl_0 {
+ s2mps11_irq: s2mps11-irq {
+ samsung,pins = "gpx0-4";
+ samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+ samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+ samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
+ };
+};
+
+&tmu_cpu0 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu1 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu2 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_cpu3 {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&tmu_gpu {
+ vtmu-supply = <&ldo7_reg>;
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&usbdrd_dwc3_0 {
+ dr_mode = "host";
+};
+
+/* usbdrd_dwc3_1 mode customized in each board */
+
+&usbdrd3_0 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
+
+&usbdrd3_1 {
+ vdd33-supply = <&ldo9_reg>;
+ vdd10-supply = <&ldo11_reg>;
+};
new file mode 100644
@@ -0,0 +1,213 @@
+/*
+ * Hardkernel Odroid HC1 board device tree source
+ *
+ * Copyright (c) 2017 Marek Szyprowski
+ * Copyright (c) 2017 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/dts-v1/;
+#include "exynos5422-odroid-core.dtsi"
+
+/ {
+ model = "Hardkernel Odroid HC1";
+ compatible = "hardkernel,odroid-hc1", "samsung,exynos5800", \
+ "samsung,exynos5";
+
+ pwmleds {
+ compatible = "pwm-leds";
+
+ blueled {
+ label = "blue:heartbeat";
+ pwms = <&pwm 2 2000000 0>;
+ pwm-names = "pwm2";
+ max_brightness = <255>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ thermal-zones {
+ cpu0_thermal: cpu0-thermal {
+ thermal-sensors = <&tmu_cpu0 0>;
+ trips {
+ cpu0_alert0: cpu-alert-0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ cpu0_alert1: cpu-alert-1 {
+ temperature = <85000>; /* millicelsius */
+ hysteresis = <10000>; /* millicelsius */
+ type = "active";
+ };
+ cpu0_crit0: cpu-crit-0 {
+ temperature = <120000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ /*
+ * When reaching cpu0_alert0, reduce CPU
+ * by 2 steps. On Exynos5422/5800 that would
+ * be: 1600 MHz and 1100 MHz.
+ */
+ map0 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu0_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ /*
+ * When reaching cpu0_alert1, reduce CPU
+ * further, down to 600 MHz (12 steps for big,
+ * 7 steps for LITTLE).
+ */
+ map2 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu0_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu1_thermal: cpu1-thermal {
+ thermal-sensors = <&tmu_cpu1 0>;
+ trips {
+ cpu1_alert0: cpu-alert-0 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu1_alert1: cpu-alert-1 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu1_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu1_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map2 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu1_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu2_thermal: cpu2-thermal {
+ thermal-sensors = <&tmu_cpu2 0>;
+ trips {
+ cpu2_alert0: cpu-alert-0 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu2_alert1: cpu-alert-1 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu2_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu2_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map2 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu2_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ cpu3_thermal: cpu3-thermal {
+ thermal-sensors = <&tmu_cpu3 0>;
+ trips {
+ cpu3_alert0: cpu-alert-0 {
+ temperature = <70000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu3_alert1: cpu-alert-1 {
+ temperature = <85000>;
+ hysteresis = <10000>;
+ type = "active";
+ };
+ cpu3_crit0: cpu-crit-0 {
+ temperature = <120000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ cooling-maps {
+ map0 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&cpu0 0 2>;
+ };
+ map1 {
+ trip = <&cpu3_alert0>;
+ cooling-device = <&cpu4 0 2>;
+ };
+ map2 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&cpu0 3 7>;
+ };
+ map3 {
+ trip = <&cpu3_alert1>;
+ cooling-device = <&cpu4 3 12>;
+ };
+ };
+ };
+ };
+
+};
+
+&pwm {
+ /*
+ * PWM 2 -- Blue LED
+ */
+ pinctrl-0 = <&pwm2_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <2>;
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ dr_mode = "host";
+};
@@ -12,35 +12,10 @@
* published by the Free Software Foundation.
*/
-#include <dt-bindings/clock/samsung,s2mps11.h>
#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-#include "exynos5800.dtsi"
-#include "exynos5422-cpus.dtsi"
+#include "exynos5422-odroid-core.dtsi"
/ {
- memory@40000000 {
- device_type = "memory";
- reg = <0x40000000 0x7EA00000>;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- firmware@02073000 {
- compatible = "samsung,secure-firmware";
- reg = <0x02073000 0x1000>;
- };
-
- fixed-rate-clocks {
- oscclk {
- compatible = "samsung,exynos5420-oscclk";
- clock-frequency = <24000000>;
- };
- };
-
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
@@ -371,97 +346,6 @@
status = "okay";
};
-&bus_wcore {
- devfreq-events = <&nocp_mem0_0>, <&nocp_mem0_1>,
- <&nocp_mem1_0>, <&nocp_mem1_1>;
- vdd-supply = <&buck3_reg>;
- exynos,saturation-ratio = <100>;
- status = "okay";
-};
-
-&bus_noc {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys_apb {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_fsys2 {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_mfc {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_gen {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_peri {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_g2d {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_g2d_acp {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_jpeg {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_jpeg_apb {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_disp1_fimd {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_disp1 {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_gscl_scaler {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&bus_mscl {
- devfreq = <&bus_wcore>;
- status = "okay";
-};
-
-&cpu0 {
- cpu-supply = <&buck6_reg>;
-};
-
-&cpu4 {
- cpu-supply = <&buck2_reg>;
-};
-
&hdmi {
status = "okay";
ddc = <&i2c_2>;
@@ -479,237 +363,6 @@
needs-hpd;
};
-&hsi2c_4 {
- status = "okay";
-
- s2mps11_pmic@66 {
- compatible = "samsung,s2mps11-pmic";
- reg = <0x66>;
- samsung,s2mps11-acokb-ground;
-
- interrupt-parent = <&gpx0>;
- interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
- pinctrl-names = "default";
- pinctrl-0 = <&s2mps11_irq>;
-
- s2mps11_osc: clocks {
- #clock-cells = <1>;
- clock-output-names = "s2mps11_ap",
- "s2mps11_cp", "s2mps11_bt";
- };
-
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "vdd_ldo1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "vddq_mmc0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "vdd_adc";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "vdd_ldo5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "vdd_ldo6";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "vdd_ldo7";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "vdd_ldo8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "vdd_ldo9";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "vdd_ldo10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "vdd_ldo11";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "vdd_ldo12";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "vddq_mmc2";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "vdd_ldo15";
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- regulator-always-on;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "vdd_ldo16";
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-always-on;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "tsp_avdd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "vdd_emmc_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo19_reg: LDO19 {
- regulator-name = "vdd_sd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo24_reg: LDO24 {
- regulator-name = "tsp_io";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "vdd_ldo26";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "vdd_mem";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck6_reg: BUCK6 {
- regulator-name = "vdd_kfc";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "vdd_1.0v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "vdd_1.8v_ldo";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "vdd_2.8v_ldo";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3750000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck10_reg: BUCK10 {
- regulator-name = "vdd_vmem";
- regulator-min-microvolt = <2850000>;
- regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
-};
-
&i2c_2 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
@@ -740,36 +393,6 @@
vqmmc-supply = <&ldo3_reg>;
};
-&mmc_2 {
- status = "okay";
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <0 4>;
- samsung,dw-mshc-ddr-timing = <0 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
- bus-width = <4>;
- cap-sd-highspeed;
- vmmc-supply = <&ldo19_reg>;
- vqmmc-supply = <&ldo13_reg>;
-};
-
-&nocp_mem0_0 {
- status = "okay";
-};
-
-&nocp_mem0_1 {
- status = "okay";
-};
-
-&nocp_mem1_0 {
- status = "okay";
-};
-
-&nocp_mem1_1 {
- status = "okay";
-};
-
&pinctrl_0 {
power_key: power-key {
samsung,pins = "gpx0-3";
@@ -784,13 +407,6 @@
samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
-
- s2mps11_irq: s2mps11-irq {
- samsung,pins = "gpx0-4";
- samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
- samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
- samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
- };
};
&pinctrl_1 {
@@ -801,45 +417,3 @@
samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
};
};
-
-&tmu_cpu0 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu1 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu2 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_cpu3 {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&tmu_gpu {
- vtmu-supply = <&ldo7_reg>;
-};
-
-&rtc {
- status = "okay";
- clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
- clock-names = "rtc", "rtc_src";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "host";
-};
-
-/* usbdrd_dwc3_1 mode customized in each board */
-
-&usbdrd3_0 {
- vdd33-supply = <&ldo9_reg>;
- vdd10-supply = <&ldo11_reg>;
-};
-
-&usbdrd3_1 {
- vdd33-supply = <&ldo9_reg>;
- vdd10-supply = <&ldo11_reg>;
-};
Odroid HC1 board is based on Odroid XU4 board, but it has no HDMI, no eMMC, no build-in USB3.0 hub, no extension port pins, and no GPIO button. USB3.0 ports are used for build-in JMicron USB to SATA bridge and Gigabit R8152 ethernet chips. HC1 uses only passive cooling. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> --- arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 443 +++++++++++++++++++++ arch/arm/boot/dts/exynos5422-odroidhc1.dts | 213 ++++++++++ arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 428 +------------------- 4 files changed, 658 insertions(+), 427 deletions(-) create mode 100644 arch/arm/boot/dts/exynos5422-odroid-core.dtsi create mode 100644 arch/arm/boot/dts/exynos5422-odroidhc1.dts -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html