@@ -472,8 +472,8 @@ static const struct pinctrl_pin_desc uniphier_ld11_pins[] = {
static const unsigned aout_pins[] = {135, 136, 137, 138, 139, 140, 141, 142};
static const int aout_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0};
-static const unsigned emmc_pins[] = {18, 19, 20, 21, 22, 23, 24, 25};
-static const int emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned int emmc_pins[] = {19, 20, 21, 22, 23, 24, 25};
+static const int emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0};
static const unsigned emmc_dat8_pins[] = {26, 27, 28, 29};
static const int emmc_dat8_muxvals[] = {0, 0, 0, 0};
static const unsigned ether_rmii_pins[] = {6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
@@ -553,8 +553,8 @@ static const struct pinctrl_pin_desc uniphier_ld20_pins[] = {
static const unsigned aout_pins[] = {135, 136, 137, 138, 139, 140, 141, 142};
static const int aout_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0};
-static const unsigned emmc_pins[] = {18, 19, 20, 21, 22, 23, 24, 25};
-static const int emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned int emmc_pins[] = {19, 20, 21, 22, 23, 24, 25};
+static const int emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0};
static const unsigned emmc_dat8_pins[] = {26, 27, 28, 29};
static const int emmc_dat8_muxvals[] = {0, 0, 0, 0};
static const unsigned ether_rgmii_pins[] = {30, 31, 32, 33, 34, 35, 36, 37, 38,
@@ -776,8 +776,8 @@ static const struct pinctrl_pin_desc uniphier_pxs3_pins[] = {
250, UNIPHIER_PIN_PULL_DOWN),
};
-static const unsigned int emmc_pins[] = {31, 32, 33, 34, 35, 36, 37, 38};
-static const int emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0, 0};
+static const unsigned int emmc_pins[] = {32, 33, 34, 35, 36, 37, 38};
+static const int emmc_muxvals[] = {0, 0, 0, 0, 0, 0, 0};
static const unsigned int emmc_dat8_pins[] = {39, 40, 41, 42};
static const int emmc_dat8_muxvals[] = {0, 0, 0, 0};
static const unsigned int ether_rgmii_pins[] = {52, 53, 54, 55, 56, 57, 58, 59,
This is handled by the mmc-pwrseq-emmc driver, which controls an eMMC hardware reset via a GPIO line. Remove it from the function pin-mux settings. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- drivers/pinctrl/uniphier/pinctrl-uniphier-ld11.c | 4 ++-- drivers/pinctrl/uniphier/pinctrl-uniphier-ld20.c | 4 ++-- drivers/pinctrl/uniphier/pinctrl-uniphier-pxs3.c | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html