diff mbox series

[2/4] RFC: net: phy: realtek: Support RTL8366RB variant

Message ID 20171105231909.5599-3-linus.walleij@linaro.org
State New
Headers show
Series RFC: Realtek 83xx SMI driver core | expand

Commit Message

Linus Walleij Nov. 5, 2017, 11:19 p.m. UTC 
The RTL8366RB is an ASIC with five internal PHYs for
LAN0..LAN3 and WAN. The PHYs are spawn off the main
device so they can be handled in a distributed manner
by the Realtek PHY driver. All that is really needed
is the power save feature enablement and letting the
PHY driver core pick up the IRQ from the switch chip.

Cc: Antti Seppälä <a.seppala@gmail.com>
Cc: Roman Yeryomin <roman@advem.lv>
Cc: Colin Leitner <colin.leitner@googlemail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/net/phy/realtek.c | 32 ++++++++++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

-- 
2.13.6
diff mbox series

Patch

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 9cbe645e3d89..2fb2eb7a32be 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -29,6 +29,9 @@ 
 #define RTL8211F_PAGE_SELECT	0x1f
 #define RTL8211F_TX_DELAY	0x100
 
+#define RTL8366RB_POWER_SAVE	0x21
+#define RTL8366RB_POWER_SAVE_ON 0x1000
+
 MODULE_DESCRIPTION("Realtek PHY driver");
 MODULE_AUTHOR("Johnson Leung");
 MODULE_LICENSE("GPL");
@@ -119,6 +122,22 @@  static int rtl8211f_config_init(struct phy_device *phydev)
 	return 0;
 }
 
+static int rtl8366rb_config_init(struct phy_device *phydev)
+{
+	int ret;
+	u16 reg;
+
+	ret = genphy_config_init(phydev);
+	if (ret < 0)
+		return ret;
+
+	reg = phy_read(phydev, RTL8366RB_POWER_SAVE);
+	reg |= RTL8366RB_POWER_SAVE_ON;
+	phy_write(phydev, RTL8366RB_POWER_SAVE, reg);
+
+	return 0;
+}
+
 static struct phy_driver realtek_drvs[] = {
 	{
 		.phy_id         = 0x00008201,
@@ -175,6 +194,18 @@  static struct phy_driver realtek_drvs[] = {
 		.config_intr	= &rtl8211f_config_intr,
 		.suspend	= genphy_suspend,
 		.resume		= genphy_resume,
+	}, {
+		/* The main part of this DSA is in drivers/net/dsa */
+		.phy_id		= 0x001cc961,
+		.name		= "RTL8366RB Gigabit Ethernet",
+		.phy_id_mask	= 0x001fffff,
+		.features	= PHY_GBIT_FEATURES,
+		.flags		= PHY_HAS_INTERRUPT,
+		.config_aneg	= &genphy_config_aneg,
+		.config_init	= &rtl8366rb_config_init,
+		.read_status	= &genphy_read_status,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
 	},
 };
 
@@ -185,6 +216,7 @@  static struct mdio_device_id __maybe_unused realtek_tbl[] = {
 	{ 0x001cc914, 0x001fffff },
 	{ 0x001cc915, 0x001fffff },
 	{ 0x001cc916, 0x001fffff },
+	{ 0x001cc961, 0x001fffff },
 	{ }
 };