@@ -209,4 +209,6 @@ source "drivers/tee/Kconfig"
source "drivers/mux/Kconfig"
+source "drivers/slimbus/Kconfig"
+
endmenu
@@ -87,6 +87,7 @@ obj-$(CONFIG_MTD) += mtd/
obj-$(CONFIG_SPI) += spi/
obj-$(CONFIG_SPMI) += spmi/
obj-$(CONFIG_HSI) += hsi/
+obj-$(CONFIG_SLIMBUS) += slimbus/
obj-y += net/
obj-$(CONFIG_ATM) += atm/
obj-$(CONFIG_FUSION) += message/
new file mode 100644
@@ -0,0 +1,16 @@
+#
+# SLIMBUS driver configuration
+#
+menuconfig SLIMBUS
+ tristate "Slimbus support"
+ help
+ Slimbus is standard interface between System-on-Chip and audio codec,
+ and other peripheral components in typical embedded systems.
+
+ If unsure, choose N.
+
+if SLIMBUS
+
+# SlIMbus controllers
+
+endif
new file mode 100644
@@ -0,0 +1,5 @@
+#
+# Makefile for kernel slimbus framework.
+#
+obj-$(CONFIG_SLIMBUS) += slimbus.o
+slimbus-y := core.o
new file mode 100644
@@ -0,0 +1,122 @@
+/* Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/slimbus.h>
+
+static const struct slim_device_id *slim_match(const struct slim_device_id *id,
+ const struct slim_device *sbdev)
+{
+ while (id->manf_id != 0 || id->prod_code != 0) {
+ if (id->manf_id == sbdev->e_addr.manf_id &&
+ id->prod_code == sbdev->e_addr.prod_code)
+ return id;
+ id++;
+ }
+ return NULL;
+}
+
+static int slim_device_match(struct device *dev, struct device_driver *drv)
+{
+ struct slim_device *sbdev = to_slim_device(dev);
+ struct slim_driver *sbdrv = to_slim_driver(drv);
+
+ return slim_match(sbdrv->id_table, sbdev) != NULL;
+}
+
+static int slim_device_probe(struct device *dev)
+{
+ struct slim_device *sbdev;
+ struct slim_driver *sbdrv;
+ int ret = 0;
+
+ sbdev = to_slim_device(dev);
+ sbdrv = to_slim_driver(dev->driver);
+
+ if (sbdrv->probe)
+ ret = sbdrv->probe(sbdev);
+
+ return ret;
+}
+
+static int slim_device_remove(struct device *dev)
+{
+ struct slim_device *sbdev = to_slim_device(dev);
+ struct slim_driver *sbdrv;
+
+ if (dev->driver) {
+ sbdrv = to_slim_driver(dev->driver);
+ if (sbdrv->remove)
+ sbdrv->remove(sbdev);
+ }
+
+ return 0;
+}
+
+struct bus_type slimbus_bus = {
+ .name = "slimbus",
+ .match = slim_device_match,
+ .probe = slim_device_probe,
+ .remove = slim_device_remove,
+};
+EXPORT_SYMBOL_GPL(slimbus_bus);
+
+/*
+ * __slim_driver_register() - Client driver registration with slimbus
+ *
+ * @drv:Client driver to be associated with client-device.
+ * @owner: owning module/driver
+ *
+ * This API will register the client driver with the slimbus
+ * It is called from the driver's module-init function.
+ */
+int __slim_driver_register(struct slim_driver *drv, struct module *owner)
+{
+ /* ID table is mandatory to match the devices to probe */
+ if (!drv->id_table)
+ return -EINVAL;
+
+ drv->driver.bus = &slimbus_bus;
+ drv->driver.owner = owner;
+
+ return driver_register(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(__slim_driver_register);
+
+/*
+ * slim_driver_unregister() - Undo effect of slim_driver_register
+ *
+ * @drv: Client driver to be unregistered
+ */
+void slim_driver_unregister(struct slim_driver *drv)
+{
+ driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL_GPL(slim_driver_unregister);
+
+static void __exit slimbus_exit(void)
+{
+ bus_unregister(&slimbus_bus);
+}
+module_exit(slimbus_exit);
+
+static int __init slimbus_init(void)
+{
+ return bus_register(&slimbus_bus);
+}
+postcore_initcall(slimbus_init);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("SLIMbus core");
@@ -452,6 +452,19 @@ struct spi_device_id {
kernel_ulong_t driver_data; /* Data private to the driver */
};
+/* SLIMbus */
+
+#define SLIMBUS_NAME_SIZE 32
+#define SLIMBUS_MODULE_PREFIX "slim:"
+
+struct slim_device_id {
+ __u16 manf_id, prod_code;
+ __u8 dev_index, instance;
+
+ /* Data private to the driver */
+ kernel_ulong_t driver_data;
+};
+
#define SPMI_NAME_SIZE 32
#define SPMI_MODULE_PREFIX "spmi:"
new file mode 100644
@@ -0,0 +1,129 @@
+/* Copyright (c) 2011-2017, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _LINUX_SLIMBUS_H
+#define _LINUX_SLIMBUS_H
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+
+/**
+ * Interfaces between SLIMbus manager drivers, SLIMbus client drivers, and
+ * SLIMbus infrastructure.
+ */
+
+extern struct bus_type slimbus_bus;
+
+/**
+ * struct slim_eaddr - Enumeration address for a slimbus device
+ * @manf_id: Manufacturer Id for the device
+ * @prod_code: Product code
+ * @dev_index: Device index
+ * @instance: Instance value
+ */
+struct slim_eaddr {
+ u16 manf_id;
+ u16 prod_code;
+ u8 dev_index;
+ u8 instance;
+};
+
+/**
+ * enum slim_device_status - slim device status
+ * @SLIM_DEVICE_STATUS_DOWN: Slim device is absent or not reported yet.
+ * @SLIM_DEVICE_STATUS_UP: Slim device is announced on the bus.
+ * @SLIM_DEVICE_STATUS_RESERVED: Reserved for future use.
+ */
+enum slim_device_status {
+ SLIM_DEVICE_STATUS_DOWN = 0,
+ SLIM_DEVICE_STATUS_UP,
+ SLIM_DEVICE_STATUS_RESERVED,
+};
+
+/**
+ * struct slim_device - Slim device handle.
+ * @dev: Driver model representation of the device.
+ * @name: Name of driver to use with this device.
+ * @e_addr: Enumeration address of this device.
+ * @driver: Device's driver. Pointer to access routines.
+ * @laddr: 1-byte Logical address of this device.
+ *
+ * This is the client/device handle returned when a slimbus
+ * device is registered with a controller.
+ * Pointer to this structure is used by client-driver as a handle.
+ */
+struct slim_device {
+ struct device dev;
+ struct slim_eaddr e_addr;
+ struct list_head node;
+ enum slim_device_status status;
+ u8 laddr;
+ bool is_laddr_valid;
+};
+
+#define to_slim_device(d) container_of(d, struct slim_device, dev)
+
+/**
+ * struct slim_driver - Slimbus 'generic device' (slave) device driver
+ * (similar to 'spi_device' on SPI)
+ * @probe: Binds this driver to a slimbus device.
+ * @remove: Unbinds this driver from the slimbus device.
+ * @shutdown: Standard shutdown callback used during powerdown/halt.
+ * @device_status: This callback is called when
+ * -The device reports present and gets a laddr assigned
+ * -The device reports absent, or the bus goes down.
+ * @driver: Slimbus device drivers should initialize name and owner field of
+ * this structure
+ * @id_table: List of slimbus devices supported by this driver
+ */
+
+struct slim_driver {
+ int (*probe)(struct slim_device *sl);
+ void (*remove)(struct slim_device *sl);
+ void (*shutdown)(struct slim_device *sl);
+ int (*device_status)(struct slim_device *sl,
+ enum slim_device_status s);
+ struct device_driver driver;
+ const struct slim_device_id *id_table;
+};
+#define to_slim_driver(d) container_of(d, struct slim_driver, driver)
+
+/*
+ * use a macro to avoid include chaining to get THIS_MODULE
+ */
+#define slim_driver_register(drv) \
+ __slim_driver_register(drv, THIS_MODULE)
+int __slim_driver_register(struct slim_driver *drv, struct module *owner);
+void slim_driver_unregister(struct slim_driver *drv);
+
+/**
+ * module_slim_driver() - Helper macro for registering a slimbus driver
+ * @__slimbus_driver: slimbus_driver struct
+ *
+ * Helper macro for slimbus drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_slim_driver(__slim_driver) \
+ module_driver(__slim_driver, slim_driver_register, \
+ slim_driver_unregister)
+
+static inline void *slim_get_devicedata(const struct slim_device *dev)
+{
+ return dev_get_drvdata(&dev->dev);
+}
+
+static inline void slim_set_devicedata(struct slim_device *dev, void *data)
+{
+ dev_set_drvdata(&dev->dev, data);
+}
+#endif /* _LINUX_SLIMBUS_H */