| Message ID | 20171124095103.26099-1-ard.biesheuvel@linaro.org |
|---|---|
| State | Accepted |
| Commit | 2c936d7c39ba4305e2da39ef2059326802a42bd2 |
| Headers | show |
| Series | [edk2] ArmVirtPkg/PrePi: don't export PE/COFF and LZMA libraries via HOBs | expand |
On 11/24/17 10:51, Ard Biesheuvel wrote: > The PrePi code we inherited from ArmPlatformPkg contains a rather > obscure optimization, where entry points of the PE/COFF and LZMA > handling routines are recorded in special HOBs, allowing DXE core > to call into that code directly rather than carry its own copy of > these libraries. > > Given that no ArmVirtPkg platforms actually include the library > resolutions* that take advantage of these optimizations, let's not > bother with them, and remove the associated code. > > * EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf > EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf > > Contributed-under: TianoCore Contribution Agreement 1.1 > Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> > --- > ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf | 1 - > ArmVirtPkg/PrePi/LzmaDecompress.h | 103 -------------------- > ArmVirtPkg/PrePi/PrePi.c | 11 --- > 3 files changed, 115 deletions(-) > > diff --git a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf > index 58290d2d1b76..b3a3f5da065e 100755 > --- a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf > +++ b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf > @@ -51,7 +51,6 @@ [LibraryClasses] > SerialPortLib > ExtractGuidedSectionLib > LzmaDecompressLib > - PeCoffGetEntryPointLib > PrePiLib > MemoryAllocationLib > HobLib > diff --git a/ArmVirtPkg/PrePi/LzmaDecompress.h b/ArmVirtPkg/PrePi/LzmaDecompress.h > deleted file mode 100644 > index a79ff343d231..000000000000 > --- a/ArmVirtPkg/PrePi/LzmaDecompress.h > +++ /dev/null > @@ -1,103 +0,0 @@ > -/** @file > - LZMA Decompress Library header file > - > - Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> > - This program and the accompanying materials > - are licensed and made available under the terms and conditions of the BSD License > - which accompanies this distribution. The full text of the license may be found at > - http://opensource.org/licenses/bsd-license.php > - > - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, > - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. > - > -**/ > - > -#ifndef __LZMA_DECOMPRESS_H___ > -#define __LZMA_DECOMPRESS_H___ > - > -/** > - Examines a GUIDed section and returns the size of the decoded buffer and the > - size of an scratch buffer required to actually decode the data in a GUIDed section. > - > - Examines a GUIDed section specified by InputSection. > - If GUID for InputSection does not match the GUID that this handler supports, > - then RETURN_UNSUPPORTED is returned. > - If the required information can not be retrieved from InputSection, > - then RETURN_INVALID_PARAMETER is returned. > - If the GUID of InputSection does match the GUID that this handler supports, > - then the size required to hold the decoded buffer is returned in OututBufferSize, > - the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field > - from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute. > - > - If InputSection is NULL, then ASSERT(). > - If OutputBufferSize is NULL, then ASSERT(). > - If ScratchBufferSize is NULL, then ASSERT(). > - If SectionAttribute is NULL, then ASSERT(). > - > - > - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. > - @param[out] OutputBufferSize A pointer to the size, in bytes, of an output buffer required > - if the buffer specified by InputSection were decoded. > - @param[out] ScratchBufferSize A pointer to the size, in bytes, required as scratch space > - if the buffer specified by InputSection were decoded. > - @param[out] SectionAttribute A pointer to the attributes of the GUIDed section. See the Attributes > - field of EFI_GUID_DEFINED_SECTION in the PI Specification. > - > - @retval RETURN_SUCCESS The information about InputSection was returned. > - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. > - @retval RETURN_INVALID_PARAMETER The information can not be retrieved from the section specified by InputSection. > - > -**/ > -RETURN_STATUS > -EFIAPI > -LzmaGuidedSectionGetInfo ( > - IN CONST VOID *InputSection, > - OUT UINT32 *OutputBufferSize, > - OUT UINT32 *ScratchBufferSize, > - OUT UINT16 *SectionAttribute > - ); > - > -/** > - Decompress a LZAM compressed GUIDed section into a caller allocated output buffer. > - > - Decodes the GUIDed section specified by InputSection. > - If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned. > - If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned. > - If the GUID of InputSection does match the GUID that this handler supports, then InputSection > - is decoded into the buffer specified by OutputBuffer and the authentication status of this > - decode operation is returned in AuthenticationStatus. If the decoded buffer is identical to the > - data in InputSection, then OutputBuffer is set to point at the data in InputSection. Otherwise, > - the decoded data will be placed in caller allocated buffer specified by OutputBuffer. > - > - If InputSection is NULL, then ASSERT(). > - If OutputBuffer is NULL, then ASSERT(). > - If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT(). > - If AuthenticationStatus is NULL, then ASSERT(). > - > - > - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. > - @param[out] OutputBuffer A pointer to a buffer that contains the result of a decode operation. > - @param[out] ScratchBuffer A caller allocated buffer that may be required by this function > - as a scratch buffer to perform the decode operation. > - @param[out] AuthenticationStatus > - A pointer to the authentication status of the decoded output buffer. > - See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI > - section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must > - never be set by this handler. > - > - @retval RETURN_SUCCESS The buffer specified by InputSection was decoded. > - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. > - @retval RETURN_INVALID_PARAMETER The section specified by InputSection can not be decoded. > - > -**/ > -RETURN_STATUS > -EFIAPI > -LzmaGuidedSectionExtraction ( > - IN CONST VOID *InputSection, > - OUT VOID **OutputBuffer, > - OUT VOID *ScratchBuffer, OPTIONAL > - OUT UINT32 *AuthenticationStatus > - ); > - > -#endif // __LZMADECOMPRESS_H__ > - > diff --git a/ArmVirtPkg/PrePi/PrePi.c b/ArmVirtPkg/PrePi/PrePi.c > index fce4ab9428a5..f6abe2f2016b 100755 > --- a/ArmVirtPkg/PrePi/PrePi.c > +++ b/ArmVirtPkg/PrePi/PrePi.c > @@ -17,7 +17,6 @@ > > #include <Library/PrePiLib.h> > #include <Library/PrintLib.h> > -#include <Library/PeCoffGetEntryPointLib.h> > #include <Library/PrePiHobListPointerLib.h> > #include <Library/TimerLib.h> > #include <Library/PerformanceLib.h> > @@ -25,10 +24,8 @@ > > #include <Ppi/GuidedSectionExtraction.h> > #include <Ppi/ArmMpCoreInfo.h> > -#include <Guid/LzmaDecompress.h> > > #include "PrePi.h" > -#include "LzmaDecompress.h" > > VOID > EFIAPI > @@ -98,14 +95,6 @@ PrePiMain ( > // SEC phase needs to run library constructors by hand. > ProcessLibraryConstructorList (); > > - // Build HOBs to pass up our version of stuff the DXE Core needs to save space > - BuildPeCoffLoaderHob (); > - BuildExtractSectionHob ( > - &gLzmaCustomDecompressGuid, > - LzmaGuidedSectionGetInfo, > - LzmaGuidedSectionExtraction > - ); > - > // Assume the FV that contains the SEC (our code) also contains a compressed FV. > Status = DecompressFirstFv (); > ASSERT_EFI_ERROR (Status); > Acked-by: Laszlo Ersek <lersek@redhat.com> _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
On 27 November 2017 at 12:32, Laszlo Ersek <lersek@redhat.com> wrote: > On 11/24/17 10:51, Ard Biesheuvel wrote: >> The PrePi code we inherited from ArmPlatformPkg contains a rather >> obscure optimization, where entry points of the PE/COFF and LZMA >> handling routines are recorded in special HOBs, allowing DXE core >> to call into that code directly rather than carry its own copy of >> these libraries. >> >> Given that no ArmVirtPkg platforms actually include the library >> resolutions* that take advantage of these optimizations, let's not >> bother with them, and remove the associated code. >> >> * EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf >> EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf >> >> Contributed-under: TianoCore Contribution Agreement 1.1 >> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> >> --- >> ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf | 1 - >> ArmVirtPkg/PrePi/LzmaDecompress.h | 103 -------------------- >> ArmVirtPkg/PrePi/PrePi.c | 11 --- >> 3 files changed, 115 deletions(-) >> >> diff --git a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf >> index 58290d2d1b76..b3a3f5da065e 100755 >> --- a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf >> +++ b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf >> @@ -51,7 +51,6 @@ [LibraryClasses] >> SerialPortLib >> ExtractGuidedSectionLib >> LzmaDecompressLib >> - PeCoffGetEntryPointLib >> PrePiLib >> MemoryAllocationLib >> HobLib >> diff --git a/ArmVirtPkg/PrePi/LzmaDecompress.h b/ArmVirtPkg/PrePi/LzmaDecompress.h >> deleted file mode 100644 >> index a79ff343d231..000000000000 >> --- a/ArmVirtPkg/PrePi/LzmaDecompress.h >> +++ /dev/null >> @@ -1,103 +0,0 @@ >> -/** @file >> - LZMA Decompress Library header file >> - >> - Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> >> - This program and the accompanying materials >> - are licensed and made available under the terms and conditions of the BSD License >> - which accompanies this distribution. The full text of the license may be found at >> - http://opensource.org/licenses/bsd-license.php >> - >> - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, >> - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. >> - >> -**/ >> - >> -#ifndef __LZMA_DECOMPRESS_H___ >> -#define __LZMA_DECOMPRESS_H___ >> - >> -/** >> - Examines a GUIDed section and returns the size of the decoded buffer and the >> - size of an scratch buffer required to actually decode the data in a GUIDed section. >> - >> - Examines a GUIDed section specified by InputSection. >> - If GUID for InputSection does not match the GUID that this handler supports, >> - then RETURN_UNSUPPORTED is returned. >> - If the required information can not be retrieved from InputSection, >> - then RETURN_INVALID_PARAMETER is returned. >> - If the GUID of InputSection does match the GUID that this handler supports, >> - then the size required to hold the decoded buffer is returned in OututBufferSize, >> - the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field >> - from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute. >> - >> - If InputSection is NULL, then ASSERT(). >> - If OutputBufferSize is NULL, then ASSERT(). >> - If ScratchBufferSize is NULL, then ASSERT(). >> - If SectionAttribute is NULL, then ASSERT(). >> - >> - >> - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. >> - @param[out] OutputBufferSize A pointer to the size, in bytes, of an output buffer required >> - if the buffer specified by InputSection were decoded. >> - @param[out] ScratchBufferSize A pointer to the size, in bytes, required as scratch space >> - if the buffer specified by InputSection were decoded. >> - @param[out] SectionAttribute A pointer to the attributes of the GUIDed section. See the Attributes >> - field of EFI_GUID_DEFINED_SECTION in the PI Specification. >> - >> - @retval RETURN_SUCCESS The information about InputSection was returned. >> - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. >> - @retval RETURN_INVALID_PARAMETER The information can not be retrieved from the section specified by InputSection. >> - >> -**/ >> -RETURN_STATUS >> -EFIAPI >> -LzmaGuidedSectionGetInfo ( >> - IN CONST VOID *InputSection, >> - OUT UINT32 *OutputBufferSize, >> - OUT UINT32 *ScratchBufferSize, >> - OUT UINT16 *SectionAttribute >> - ); >> - >> -/** >> - Decompress a LZAM compressed GUIDed section into a caller allocated output buffer. >> - >> - Decodes the GUIDed section specified by InputSection. >> - If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned. >> - If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned. >> - If the GUID of InputSection does match the GUID that this handler supports, then InputSection >> - is decoded into the buffer specified by OutputBuffer and the authentication status of this >> - decode operation is returned in AuthenticationStatus. If the decoded buffer is identical to the >> - data in InputSection, then OutputBuffer is set to point at the data in InputSection. Otherwise, >> - the decoded data will be placed in caller allocated buffer specified by OutputBuffer. >> - >> - If InputSection is NULL, then ASSERT(). >> - If OutputBuffer is NULL, then ASSERT(). >> - If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT(). >> - If AuthenticationStatus is NULL, then ASSERT(). >> - >> - >> - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. >> - @param[out] OutputBuffer A pointer to a buffer that contains the result of a decode operation. >> - @param[out] ScratchBuffer A caller allocated buffer that may be required by this function >> - as a scratch buffer to perform the decode operation. >> - @param[out] AuthenticationStatus >> - A pointer to the authentication status of the decoded output buffer. >> - See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI >> - section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must >> - never be set by this handler. >> - >> - @retval RETURN_SUCCESS The buffer specified by InputSection was decoded. >> - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. >> - @retval RETURN_INVALID_PARAMETER The section specified by InputSection can not be decoded. >> - >> -**/ >> -RETURN_STATUS >> -EFIAPI >> -LzmaGuidedSectionExtraction ( >> - IN CONST VOID *InputSection, >> - OUT VOID **OutputBuffer, >> - OUT VOID *ScratchBuffer, OPTIONAL >> - OUT UINT32 *AuthenticationStatus >> - ); >> - >> -#endif // __LZMADECOMPRESS_H__ >> - >> diff --git a/ArmVirtPkg/PrePi/PrePi.c b/ArmVirtPkg/PrePi/PrePi.c >> index fce4ab9428a5..f6abe2f2016b 100755 >> --- a/ArmVirtPkg/PrePi/PrePi.c >> +++ b/ArmVirtPkg/PrePi/PrePi.c >> @@ -17,7 +17,6 @@ >> >> #include <Library/PrePiLib.h> >> #include <Library/PrintLib.h> >> -#include <Library/PeCoffGetEntryPointLib.h> >> #include <Library/PrePiHobListPointerLib.h> >> #include <Library/TimerLib.h> >> #include <Library/PerformanceLib.h> >> @@ -25,10 +24,8 @@ >> >> #include <Ppi/GuidedSectionExtraction.h> >> #include <Ppi/ArmMpCoreInfo.h> >> -#include <Guid/LzmaDecompress.h> >> >> #include "PrePi.h" >> -#include "LzmaDecompress.h" >> >> VOID >> EFIAPI >> @@ -98,14 +95,6 @@ PrePiMain ( >> // SEC phase needs to run library constructors by hand. >> ProcessLibraryConstructorList (); >> >> - // Build HOBs to pass up our version of stuff the DXE Core needs to save space >> - BuildPeCoffLoaderHob (); >> - BuildExtractSectionHob ( >> - &gLzmaCustomDecompressGuid, >> - LzmaGuidedSectionGetInfo, >> - LzmaGuidedSectionExtraction >> - ); >> - >> // Assume the FV that contains the SEC (our code) also contains a compressed FV. >> Status = DecompressFirstFv (); >> ASSERT_EFI_ERROR (Status); >> > > Acked-by: Laszlo Ersek <lersek@redhat.com> > Thanks. Pushed as 2c936d7c39ba4305e2da39ef2059326802a42bd2 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel
diff --git a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf index 58290d2d1b76..b3a3f5da065e 100755 --- a/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf +++ b/ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf @@ -51,7 +51,6 @@ [LibraryClasses] SerialPortLib ExtractGuidedSectionLib LzmaDecompressLib - PeCoffGetEntryPointLib PrePiLib MemoryAllocationLib HobLib diff --git a/ArmVirtPkg/PrePi/LzmaDecompress.h b/ArmVirtPkg/PrePi/LzmaDecompress.h deleted file mode 100644 index a79ff343d231..000000000000 --- a/ArmVirtPkg/PrePi/LzmaDecompress.h +++ /dev/null @@ -1,103 +0,0 @@ -/** @file - LZMA Decompress Library header file - - Copyright (c) 2006 - 2010, Intel Corporation. All rights reserved.<BR> - This program and the accompanying materials - are licensed and made available under the terms and conditions of the BSD License - which accompanies this distribution. The full text of the license may be found at - http://opensource.org/licenses/bsd-license.php - - THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, - WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. - -**/ - -#ifndef __LZMA_DECOMPRESS_H___ -#define __LZMA_DECOMPRESS_H___ - -/** - Examines a GUIDed section and returns the size of the decoded buffer and the - size of an scratch buffer required to actually decode the data in a GUIDed section. - - Examines a GUIDed section specified by InputSection. - If GUID for InputSection does not match the GUID that this handler supports, - then RETURN_UNSUPPORTED is returned. - If the required information can not be retrieved from InputSection, - then RETURN_INVALID_PARAMETER is returned. - If the GUID of InputSection does match the GUID that this handler supports, - then the size required to hold the decoded buffer is returned in OututBufferSize, - the size of an optional scratch buffer is returned in ScratchSize, and the Attributes field - from EFI_GUID_DEFINED_SECTION header of InputSection is returned in SectionAttribute. - - If InputSection is NULL, then ASSERT(). - If OutputBufferSize is NULL, then ASSERT(). - If ScratchBufferSize is NULL, then ASSERT(). - If SectionAttribute is NULL, then ASSERT(). - - - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. - @param[out] OutputBufferSize A pointer to the size, in bytes, of an output buffer required - if the buffer specified by InputSection were decoded. - @param[out] ScratchBufferSize A pointer to the size, in bytes, required as scratch space - if the buffer specified by InputSection were decoded. - @param[out] SectionAttribute A pointer to the attributes of the GUIDed section. See the Attributes - field of EFI_GUID_DEFINED_SECTION in the PI Specification. - - @retval RETURN_SUCCESS The information about InputSection was returned. - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. - @retval RETURN_INVALID_PARAMETER The information can not be retrieved from the section specified by InputSection. - -**/ -RETURN_STATUS -EFIAPI -LzmaGuidedSectionGetInfo ( - IN CONST VOID *InputSection, - OUT UINT32 *OutputBufferSize, - OUT UINT32 *ScratchBufferSize, - OUT UINT16 *SectionAttribute - ); - -/** - Decompress a LZAM compressed GUIDed section into a caller allocated output buffer. - - Decodes the GUIDed section specified by InputSection. - If GUID for InputSection does not match the GUID that this handler supports, then RETURN_UNSUPPORTED is returned. - If the data in InputSection can not be decoded, then RETURN_INVALID_PARAMETER is returned. - If the GUID of InputSection does match the GUID that this handler supports, then InputSection - is decoded into the buffer specified by OutputBuffer and the authentication status of this - decode operation is returned in AuthenticationStatus. If the decoded buffer is identical to the - data in InputSection, then OutputBuffer is set to point at the data in InputSection. Otherwise, - the decoded data will be placed in caller allocated buffer specified by OutputBuffer. - - If InputSection is NULL, then ASSERT(). - If OutputBuffer is NULL, then ASSERT(). - If ScratchBuffer is NULL and this decode operation requires a scratch buffer, then ASSERT(). - If AuthenticationStatus is NULL, then ASSERT(). - - - @param[in] InputSection A pointer to a GUIDed section of an FFS formatted file. - @param[out] OutputBuffer A pointer to a buffer that contains the result of a decode operation. - @param[out] ScratchBuffer A caller allocated buffer that may be required by this function - as a scratch buffer to perform the decode operation. - @param[out] AuthenticationStatus - A pointer to the authentication status of the decoded output buffer. - See the definition of authentication status in the EFI_PEI_GUIDED_SECTION_EXTRACTION_PPI - section of the PI Specification. EFI_AUTH_STATUS_PLATFORM_OVERRIDE must - never be set by this handler. - - @retval RETURN_SUCCESS The buffer specified by InputSection was decoded. - @retval RETURN_UNSUPPORTED The section specified by InputSection does not match the GUID this handler supports. - @retval RETURN_INVALID_PARAMETER The section specified by InputSection can not be decoded. - -**/ -RETURN_STATUS -EFIAPI -LzmaGuidedSectionExtraction ( - IN CONST VOID *InputSection, - OUT VOID **OutputBuffer, - OUT VOID *ScratchBuffer, OPTIONAL - OUT UINT32 *AuthenticationStatus - ); - -#endif // __LZMADECOMPRESS_H__ - diff --git a/ArmVirtPkg/PrePi/PrePi.c b/ArmVirtPkg/PrePi/PrePi.c index fce4ab9428a5..f6abe2f2016b 100755 --- a/ArmVirtPkg/PrePi/PrePi.c +++ b/ArmVirtPkg/PrePi/PrePi.c @@ -17,7 +17,6 @@ #include <Library/PrePiLib.h> #include <Library/PrintLib.h> -#include <Library/PeCoffGetEntryPointLib.h> #include <Library/PrePiHobListPointerLib.h> #include <Library/TimerLib.h> #include <Library/PerformanceLib.h> @@ -25,10 +24,8 @@ #include <Ppi/GuidedSectionExtraction.h> #include <Ppi/ArmMpCoreInfo.h> -#include <Guid/LzmaDecompress.h> #include "PrePi.h" -#include "LzmaDecompress.h" VOID EFIAPI @@ -98,14 +95,6 @@ PrePiMain ( // SEC phase needs to run library constructors by hand. ProcessLibraryConstructorList (); - // Build HOBs to pass up our version of stuff the DXE Core needs to save space - BuildPeCoffLoaderHob (); - BuildExtractSectionHob ( - &gLzmaCustomDecompressGuid, - LzmaGuidedSectionGetInfo, - LzmaGuidedSectionExtraction - ); - // Assume the FV that contains the SEC (our code) also contains a compressed FV. Status = DecompressFirstFv (); ASSERT_EFI_ERROR (Status);
The PrePi code we inherited from ArmPlatformPkg contains a rather obscure optimization, where entry points of the PE/COFF and LZMA handling routines are recorded in special HOBs, allowing DXE core to call into that code directly rather than carry its own copy of these libraries. Given that no ArmVirtPkg platforms actually include the library resolutions* that take advantage of these optimizations, let's not bother with them, and remove the associated code. * EmbeddedPkg/Library/LzmaHobCustomDecompressLib/LzmaHobCustomDecompressLib.inf EmbeddedPkg/Library/DxeHobPeCoffLib/DxeHobPeCoffLib.inf Contributed-under: TianoCore Contribution Agreement 1.1 Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> --- ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf | 1 - ArmVirtPkg/PrePi/LzmaDecompress.h | 103 -------------------- ArmVirtPkg/PrePi/PrePi.c | 11 --- 3 files changed, 115 deletions(-) -- 2.11.0 _______________________________________________ edk2-devel mailing list edk2-devel@lists.01.org https://lists.01.org/mailman/listinfo/edk2-devel