@@ -9,7 +9,7 @@
#ifndef _DAVINCI_NAND_H_
#define _DAVINCI_NAND_H_
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <asm/arch/hardware.h>
#define NAND_READ_START 0x00
@@ -14,7 +14,7 @@
#include <common.h>
#include <jffs2/load_kernel.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/omap_gpmc.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
@@ -16,7 +16,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <atmel_lcdc.h>
#include <asm/mach-types.h>
@@ -8,7 +8,7 @@
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <jffs2/load_kernel.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include "igep00x0.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -18,7 +18,7 @@
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/onenand.h>
#include <jffs2/load_kernel.h>
#include <mtd_node.h>
@@ -5,7 +5,7 @@
#include <asm/arch/mem.h>
#include <asm/arch/sys_proto.h>
#include <jffs2/load_kernel.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include "igep00x0.h"
/*
@@ -26,7 +26,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <asm/omap_musb.h>
#include <linux/errno.h>
#include <linux/usb/ch9.h>
@@ -20,7 +20,7 @@
#include <asm/arch/gpio.h>
#include <asm/arch/clk.h>
#include <lcd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <atmel_lcdc.h>
#include <atmel_mci.h>
#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
@@ -17,7 +17,7 @@
#include <ns16550.h>
#include <netdev.h>
#include <twl4030.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
@@ -26,7 +26,7 @@
#include <asm/arch/atmel_serial.h>
#include <asm/arch/clk.h>
#include <asm/gpio.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <atmel_mci.h>
#include <asm/arch/at91_spi.h>
#include <spi.h>
@@ -20,7 +20,7 @@
#include <status_led.h>
#endif
#include <twl4030.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
@@ -25,7 +25,7 @@
#include <twl4030.h>
#include <asm/mach-types.h>
#include <asm/omap_musb.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/usb/ch9.h>
#include <linux/usb/gadget.h>
#include <linux/usb/musb.h>
@@ -80,7 +80,7 @@
#include <cramfs/cramfs_fs.h>
#if defined(CONFIG_CMD_NAND)
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <nand.h>
#endif
@@ -81,7 +81,7 @@
#include <linux/mtd/mtd.h>
#if defined(CONFIG_CMD_NAND)
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <nand.h>
#endif
@@ -11,7 +11,7 @@
#include <asm/io.h>
#include <linux/errno.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand_ecc.h>
#include <asm/arch/hardware.h>
@@ -9,7 +9,7 @@
#define __DENALI_H__
#include <linux/bitops.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/types.h>
#define DEVICE_RESET 0x0
@@ -8,7 +8,7 @@
#include <common.h>
#include <asm/io.h>
#include <asm/unaligned.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include "denali.h"
#define DENALI_MAP01 (1 << 26) /* read/write pages in PIO */
@@ -13,7 +13,7 @@
#include <nand.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <asm/io.h>
@@ -12,7 +12,7 @@
#include <nand.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <asm/io.h>
@@ -10,7 +10,7 @@
#include <common.h>
#include <asm/io.h>
#include <fsl_ifc.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#ifdef CONFIG_CHAIN_OF_TRUST
#include <fsl_validate.h>
#endif
@@ -15,7 +15,7 @@
#include <common.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/types.h>
#include <malloc.h>
#include <linux/errno.h>
@@ -37,7 +37,7 @@
#include <linux/err.h>
#include <linux/compat.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/nand_bch.h>
#ifdef CONFIG_MTD_PARTITIONS
@@ -62,7 +62,7 @@
#include <linux/compat.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/bbm.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/bitops.h>
#include <linux/string.h>
@@ -13,7 +13,7 @@
#include <linux/bitops.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/nand_bch.h>
#include <linux/bch.h>
#include <malloc.h>
@@ -7,7 +7,7 @@
*
*/
#include <common.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/sizes.h>
#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
@@ -10,7 +10,7 @@
*/
#include <common.h>
#include <linux/kernel.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
static const struct nand_data_interface onfi_sdr_timings[] = {
/* Mode 0 */
@@ -15,7 +15,7 @@
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/types.h>
#include "pxa3xx_nand.h"
@@ -32,7 +32,7 @@
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/io.h>
@@ -26,7 +26,7 @@
#include <malloc.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <nand.h>
@@ -13,7 +13,7 @@
#include <linux/errno.h>
#include <nand.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand_ecc.h>
#include <asm/arch/hardware.h>
@@ -22,7 +22,7 @@
#include <linux/mtd/mtd.h>
#include <linux/types.h>
#include <linux/time.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
static inline void translate_spare2oob(const struct yaffs_spare *spare, u8 *oob)
@@ -10,7 +10,7 @@
#ifndef __LINUX_MTD_NAND_FSL_UPM
#define __LINUX_MTD_NAND_FSL_UPM
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
#define FSL_UPM_WAIT_RUN_PATTERN 0x1
#define FSL_UPM_WAIT_WRITE_BYTE 0x2
@@ -8,7 +8,7 @@
#ifndef __FSMC_NAND_H__
#define __FSMC_NAND_H__
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
struct fsmc_regs {
u32 ctrl; /* 0x00 */
similarity index 99%
rename from include/linux/mtd/nand.h
rename to include/linux/mtd/rawnand.h
@@ -1,6 +1,4 @@
/*
- * linux/include/linux/mtd/nand.h
- *
* Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
* Steven J. Hill <sjhill@realitydiluted.com>
* Thomas Gleixner <tglx@linutronix.de>
@@ -13,8 +11,8 @@
* Changelog:
* See git changelog.
*/
-#ifndef __LINUX_MTD_NAND_H
-#define __LINUX_MTD_NAND_H
+#ifndef __LINUX_MTD_RAWNAND_H
+#define __LINUX_MTD_RAWNAND_H
#include <config.h>
@@ -1270,5 +1268,4 @@ int nand_maximize_ecc(struct nand_chip *chip,
/* Reset and initialize a NAND device */
int nand_reset(struct nand_chip *chip, int chipnr);
-
-#endif /* __LINUX_MTD_NAND_H */
+#endif /* __LINUX_MTD_RAWNAND_H */
@@ -32,7 +32,7 @@ unsigned long nand_size(void);
#include <linux/compat.h>
#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
+#include <linux/mtd/rawnand.h>
int nand_mtd_to_devnum(struct mtd_info *mtd);
This header was renamed to rawnand.h in Linux. The following is the corresponding commit in Linux. commit d4092d76a4a4e57b65910899948a83cc8646c5a5 Author: Boris Brezillon <boris.brezillon@free-electrons.com> Date: Fri Aug 4 17:29:10 2017 +0200 mtd: nand: Rename nand.h into rawnand.h We are planning to share more code between different NAND based devices (SPI NAND, OneNAND and raw NANDs), but before doing that we need to move the existing include/linux/mtd/nand.h file into include/linux/mtd/rawnand.h so we can later create a nand.h header containing all common structure and function prototypes. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- arch/arm/include/asm/ti-common/davinci_nand.h | 2 +- arch/arm/mach-omap2/omap3/spl_id_nand.c | 2 +- board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- board/isee/igep00x0/common.c | 2 +- board/isee/igep00x0/igep00x0.c | 2 +- board/isee/igep00x0/spl.c | 2 +- board/logicpd/omap3som/omap3logic.c | 2 +- board/mini-box/picosam9g45/picosam9g45.c | 2 +- board/overo/overo.c | 2 +- board/siemens/taurus/taurus.c | 2 +- board/ti/beagle/beagle.c | 2 +- board/ti/evm/evm.c | 2 +- cmd/jffs2.c | 2 +- cmd/mtdparts.c | 2 +- drivers/mtd/nand/arasan_nfc.c | 2 +- drivers/mtd/nand/denali.h | 2 +- drivers/mtd/nand/denali_spl.c | 2 +- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/fsl_ifc_nand.c | 2 +- drivers/mtd/nand/fsl_ifc_spl.c | 2 +- drivers/mtd/nand/mxs_nand.c | 2 +- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_bbt.c | 2 +- drivers/mtd/nand/nand_bch.c | 2 +- drivers/mtd/nand/nand_ids.c | 2 +- drivers/mtd/nand/nand_timings.c | 2 +- drivers/mtd/nand/pxa3xx_nand.c | 2 +- drivers/mtd/nand/sunxi_nand.c | 2 +- drivers/mtd/nand/vf610_nfc.c | 2 +- drivers/mtd/nand/zynq_nand.c | 2 +- fs/yaffs2/yaffs_mtdif.c | 2 +- include/linux/mtd/fsl_upm.h | 2 +- include/linux/mtd/fsmc_nand.h | 2 +- include/linux/mtd/{nand.h => rawnand.h} | 9 +++------ include/nand.h | 2 +- 35 files changed, 37 insertions(+), 40 deletions(-) rename include/linux/mtd/{nand.h => rawnand.h} (99%)