diff mbox series

[V2,net-next,2/8] net: hns3: Add mailbox support to VF driver

Message ID 20171208211702.20104-3-salil.mehta@huawei.com
State Superseded
Headers show
Series Hisilicon Network Subsystem 3 VF Ethernet Driver | expand

Commit Message

Salil Mehta Dec. 8, 2017, 9:16 p.m. UTC
This patch adds the support of the mailbox to the VF driver. The
mailbox shall be used as an interface to communicate with the
PF driver for various purposes like {set|get} MAC related
operations, reset, link status etc. The mailbox supports both
synchronous and asynchronous command send to PF driver.

Signed-off-by: Salil Mehta <salil.mehta@huawei.com>

Signed-off-by: lipeng <lipeng321@huawei.com>

---
Patch V2: Addressed some internal commnets
Patch V1: Initial Submit
---
 drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h    |  94 +++++++++++
 .../ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c   | 188 +++++++++++++++++++++
 2 files changed, 282 insertions(+)
 create mode 100644 drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
 create mode 100644 drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c

-- 
2.7.4

Comments

Philippe Ombredanne Dec. 9, 2017, 12:16 a.m. UTC | #1
Sali,

On Fri, Dec 8, 2017 at 10:16 PM, Salil Mehta <salil.mehta@huawei.com> wrote:
> This patch adds the support of the mailbox to the VF driver. The

> mailbox shall be used as an interface to communicate with the

> PF driver for various purposes like {set|get} MAC related

> operations, reset, link status etc. The mailbox supports both

> synchronous and asynchronous command send to PF driver.

>

> Signed-off-by: Salil Mehta <salil.mehta@huawei.com>

> Signed-off-by: lipeng <lipeng321@huawei.com>

[...]
> --- /dev/null

> +++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h

> @@ -0,0 +1,94 @@

> +/*

> + * Copyright (c) 2016-2017 Hisilicon Limited.

> + *

> + * This program is free software; you can redistribute it and/or modify

> + * it under the terms of the GNU General Public License as published by

> + * the Free Software Foundation; either version 2 of the License, or

> + * (at your option) any later version.

> + */


Why not use the new SPDX ids?
e.g.
> +/* SPDX-License-Identifier: GPL-2.0+ */

> +/* Copyright (c) 2016-2017 Hisilicon Limited. */


See Linus posts and Thomas doc patches for details.

-- 
Cordially
Philippe Ombredanne
Salil Mehta Dec. 11, 2017, 4:04 p.m. UTC | #2
Hi Philippe,

> -----Original Message-----

> From: Philippe Ombredanne [mailto:pombredanne@nexb.com]

> Sent: Saturday, December 09, 2017 12:17 AM

> To: Salil Mehta <salil.mehta@huawei.com>

> Cc: David S. Miller <davem@davemloft.net>; Zhuangyuzeng (Yisen)

> <yisen.zhuang@huawei.com>; lipeng (Y) <lipeng321@huawei.com>;

> mehta.salil.lnk@gmail.com; netdev@vger.kernel.org; LKML <linux-

> kernel@vger.kernel.org>; linux-rdma@vger.kernel.org; Linuxarm

> <linuxarm@huawei.com>

> Subject: Re: [PATCH V2 net-next 2/8] net: hns3: Add mailbox support to

> VF driver

> 

> Sali,


Sali ---> Salil

Thanks
> 

> On Fri, Dec 8, 2017 at 10:16 PM, Salil Mehta <salil.mehta@huawei.com>

> wrote:

> > This patch adds the support of the mailbox to the VF driver. The

> > mailbox shall be used as an interface to communicate with the

> > PF driver for various purposes like {set|get} MAC related

> > operations, reset, link status etc. The mailbox supports both

> > synchronous and asynchronous command send to PF driver.

> >

> > Signed-off-by: Salil Mehta <salil.mehta@huawei.com>

> > Signed-off-by: lipeng <lipeng321@huawei.com>

> [...]

> > --- /dev/null

> > +++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h

> > @@ -0,0 +1,94 @@

> > +/*

> > + * Copyright (c) 2016-2017 Hisilicon Limited.

> > + *

> > + * This program is free software; you can redistribute it and/or

> modify

> > + * it under the terms of the GNU General Public License as published

> by

> > + * the Free Software Foundation; either version 2 of the License, or

> > + * (at your option) any later version.

> > + */

> 

> Why not use the new SPDX ids?

We can. I will change the headers for files [.c .h Makefile] part of HNS3
VF driver change in next V3 patch submit.

> e.g.

> > +/* SPDX-License-Identifier: GPL-2.0+ */

> > +/* Copyright (c) 2016-2017 Hisilicon Limited. */

> 

> See Linus posts and Thomas doc patches for details.

Sure.

Thanks!
> 

> --

> Cordially

> Philippe Ombredanne
diff mbox series

Patch

diff --git a/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
new file mode 100644
index 0000000..5a6ebfca
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hclge_mbx.h
@@ -0,0 +1,94 @@ 
+/*
+ * Copyright (c) 2016-2017 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __HCLGE_MBX_H
+#define __HCLGE_MBX_H
+#include <linux/init.h>
+#include <linux/mutex.h>
+#include <linux/types.h>
+
+#define HCLGE_MBX_VF_MSG_DATA_NUM	16
+
+enum HCLGE_MBX_OPCODE {
+	HCLGE_MBX_RESET = 0x01,		/* (VF -> PF) assert reset */
+	HCLGE_MBX_SET_UNICAST,		/* (VF -> PF) set UC addr */
+	HCLGE_MBX_SET_MULTICAST,	/* (VF -> PF) set MC addr */
+	HCLGE_MBX_SET_VLAN,		/* (VF -> PF) set VLAN */
+	HCLGE_MBX_MAP_RING_TO_VECTOR,	/* (VF -> PF) map ring-to-vector */
+	HCLGE_MBX_UNMAP_RING_TO_VECTOR,	/* (VF -> PF) unamp ring-to-vector */
+	HCLGE_MBX_SET_PROMISC_MODE,	/* (VF -> PF) set promiscuous mode */
+	HCLGE_MBX_SET_MACVLAN,		/* (VF -> PF) set unicast filter */
+	HCLGE_MBX_API_NEGOTIATE,	/* (VF -> PF) negotiate API version */
+	HCLGE_MBX_GET_QINFO,		/* (VF -> PF) get queue config */
+	HCLGE_MBX_GET_TCINFO,		/* (VF -> PF) get TC config */
+	HCLGE_MBX_GET_RETA,		/* (VF -> PF) get RETA */
+	HCLGE_MBX_GET_RSS_KEY,		/* (VF -> PF) get RSS key */
+	HCLGE_MBX_GET_MAC_ADDR,		/* (VF -> PF) get MAC addr */
+	HCLGE_MBX_PF_VF_RESP,		/* (PF -> VF) generate respone to VF */
+	HCLGE_MBX_GET_BDNUM,		/* (VF -> PF) get BD num */
+	HCLGE_MBX_GET_BUFSIZE,		/* (VF -> PF) get buffer size */
+	HCLGE_MBX_GET_STREAMID,		/* (VF -> PF) get stream id */
+	HCLGE_MBX_SET_AESTART,		/* (VF -> PF) start ae */
+	HCLGE_MBX_SET_TSOSTATS,		/* (VF -> PF) get tso stats */
+	HCLGE_MBX_LINK_STAT_CHANGE,	/* (PF -> VF) link status has changed */
+	HCLGE_MBX_GET_BASE_CONFIG,	/* (VF -> PF) get config */
+	HCLGE_MBX_BIND_FUNC_QUEUE,	/* (VF -> PF) bind function and queue */
+	HCLGE_MBX_GET_LINK_STATUS,	/* (VF -> PF) get link status */
+	HCLGE_MBX_QUEUE_RESET,		/* (VF -> PF) reset queue */
+};
+
+/* below are per-VF mac-vlan subcodes */
+enum hclge_mbx_mac_vlan_subcode {
+	HCLGE_MBX_MAC_VLAN_UC_MODIFY = 0,	/* modify UC mac addr */
+	HCLGE_MBX_MAC_VLAN_UC_ADD,		/* add a new UC mac addr */
+	HCLGE_MBX_MAC_VLAN_UC_REMOVE,		/* remove a new UC mac addr */
+	HCLGE_MBX_MAC_VLAN_MC_MODIFY,		/* modify MC mac addr */
+	HCLGE_MBX_MAC_VLAN_MC_ADD,		/* add new MC mac addr */
+	HCLGE_MBX_MAC_VLAN_MC_REMOVE,		/* remove MC mac addr */
+	HCLGE_MBX_MAC_VLAN_MC_FUNC_MTA_ENABLE,	/* config func MTA enable */
+};
+
+/* below are per-VF vlan cfg subcodes */
+enum hclge_mbx_vlan_cfg_subcode {
+	HCLGE_MBX_VLAN_FILTER = 0,	/* set vlan filter */
+	HCLGE_MBX_VLAN_TX_OFF_CFG,	/* set tx side vlan offload */
+	HCLGE_MBX_VLAN_RX_OFF_CFG,	/* set rx side vlan offload */
+};
+
+#define HCLGE_MBX_MAX_MSG_SIZE	16
+#define HCLGE_MBX_MAX_RESP_DATA_SIZE	8
+
+struct hclgevf_mbx_resp_status {
+	struct mutex mbx_mutex; /* protects against contending sync cmd resp */
+	u32 origin_mbx_msg;
+	bool received_resp;
+	int resp_status;
+	u8 additional_info[HCLGE_MBX_MAX_RESP_DATA_SIZE];
+};
+
+struct hclge_mbx_vf_to_pf_cmd {
+	u8 rsv;
+	u8 mbx_src_vfid; /* Auto filled by IMP */
+	u8 rsv1[2];
+	u8 msg_len;
+	u8 rsv2[3];
+	u8 msg[HCLGE_MBX_MAX_MSG_SIZE];
+};
+
+struct hclge_mbx_pf_to_vf_cmd {
+	u8 dest_vfid;
+	u8 rsv[3];
+	u8 msg_len;
+	u8 rsv1[3];
+	u16 msg[8];
+};
+
+#define hclge_mbx_ring_ptr_move_crq(crq) \
+	(crq->next_to_use = (crq->next_to_use + 1) % crq->desc_num)
+#endif
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
new file mode 100644
index 0000000..fb3380b
--- /dev/null
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_mbx.c
@@ -0,0 +1,188 @@ 
+/*
+ * Copyright (c) 2016-2017 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "hclge_mbx.h"
+#include "hclgevf_main.h"
+#include "hnae3.h"
+
+static void hclgevf_reset_mbx_resp_status(struct hclgevf_dev *hdev)
+{
+	/* this function should be called with mbx_resp.mbx_mutex held
+	 * to prtect the received_response from race condition
+	 */
+	hdev->mbx_resp.received_resp  = false;
+	hdev->mbx_resp.origin_mbx_msg = 0;
+	hdev->mbx_resp.resp_status    = 0;
+	memset(hdev->mbx_resp.additional_info, 0, HCLGE_MBX_MAX_RESP_DATA_SIZE);
+}
+
+/* hclgevf_get_mbx_resp: used to get a response from PF after VF sends a mailbox
+ * message to PF.
+ * @hdev: pointer to struct hclgevf_dev
+ * @resp_msg: pointer to store the original message type and response status
+ * @len: the resp_msg data array length.
+ */
+static int hclgevf_get_mbx_resp(struct hclgevf_dev *hdev, u16 code0, u16 code1,
+				u8 *resp_data, u16 resp_len)
+{
+#define HCLGEVF_MAX_TRY_TIMES	500
+#define HCLGEVF_SLEEP_USCOEND	1000
+	struct hclgevf_mbx_resp_status *mbx_resp;
+	u16 r_code0, r_code1;
+	int i = 0;
+
+	if (resp_len > HCLGE_MBX_MAX_RESP_DATA_SIZE) {
+		dev_err(&hdev->pdev->dev,
+			"VF mbx response len(=%d) exceeds maximum(=%d)\n",
+			resp_len,
+			HCLGE_MBX_MAX_RESP_DATA_SIZE);
+		return -EINVAL;
+	}
+
+	while ((!hdev->mbx_resp.received_resp) && (i < HCLGEVF_MAX_TRY_TIMES)) {
+		udelay(HCLGEVF_SLEEP_USCOEND);
+		i++;
+	}
+
+	if (i >= HCLGEVF_MAX_TRY_TIMES) {
+		dev_err(&hdev->pdev->dev,
+			"VF could not get mbx resp(=%d) from PF in %d tries\n",
+			hdev->mbx_resp.received_resp, i);
+		return -EIO;
+	}
+
+	mbx_resp = &hdev->mbx_resp;
+	r_code0 = (u16)(mbx_resp->origin_mbx_msg >> 16);
+	r_code1 = (u16)(mbx_resp->origin_mbx_msg & 0xff);
+	if (resp_data)
+		memcpy(resp_data, &mbx_resp->additional_info[0], resp_len);
+
+	hclgevf_reset_mbx_resp_status(hdev);
+
+	if (!(r_code0 == code0 && r_code1 == code1 && !mbx_resp->resp_status)) {
+		dev_err(&hdev->pdev->dev,
+			"VF could not match resp code(code0=%d,code1=%d), %d",
+			code0, code1, mbx_resp->resp_status);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+int hclgevf_send_mbx_msg(struct hclgevf_dev *hdev, u16 code, u16 subcode,
+			 const u8 *msg_data, u8 msg_len, bool need_resp,
+			 u8 *resp_data, u16 resp_len)
+{
+	struct hclge_mbx_vf_to_pf_cmd *req;
+	struct hclgevf_desc desc;
+	int status;
+
+	req = (struct hclge_mbx_vf_to_pf_cmd *)desc.data;
+
+	/* first two bytes are reserved for code & subcode */
+	if (msg_len > (HCLGE_MBX_MAX_MSG_SIZE - 2)) {
+		dev_err(&hdev->pdev->dev,
+			"VF send mbx msg fail, msg len %d exceeds max len %d\n",
+			msg_len, HCLGE_MBX_MAX_MSG_SIZE);
+		return -EINVAL;
+	}
+
+	hclgevf_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_VF_TO_PF, false);
+	req->msg[0] = code;
+	req->msg[1] = subcode;
+	memcpy(&req->msg[2], msg_data, msg_len);
+
+	/* synchronous send */
+	if (need_resp) {
+		mutex_lock(&hdev->mbx_resp.mbx_mutex);
+		hclgevf_reset_mbx_resp_status(hdev);
+		status = hclgevf_cmd_send(&hdev->hw, &desc, 1);
+		if (status) {
+			dev_err(&hdev->pdev->dev,
+				"VF failed(=%d) to send mbx message to PF\n",
+				status);
+			mutex_unlock(&hdev->mbx_resp.mbx_mutex);
+			return status;
+		}
+
+		status = hclgevf_get_mbx_resp(hdev, code, subcode, resp_data,
+					      resp_len);
+		mutex_unlock(&hdev->mbx_resp.mbx_mutex);
+	} else {
+		/* asynchronous send */
+		status = hclgevf_cmd_send(&hdev->hw, &desc, 1);
+		if (status) {
+			dev_err(&hdev->pdev->dev,
+				"VF failed(=%d) to send mbx message to PF\n",
+				status);
+			return status;
+		}
+	}
+
+	return status;
+}
+
+void hclgevf_mbx_handler(struct hclgevf_dev *hdev)
+{
+	struct hclgevf_mbx_resp_status *resp;
+	struct hclge_mbx_pf_to_vf_cmd *req;
+	struct hclgevf_cmq_ring *crq;
+	struct hclgevf_desc *desc;
+	u16 link_status, flag;
+	u8 *temp;
+	int i;
+
+	resp = &hdev->mbx_resp;
+	crq = &hdev->hw.cmq.crq;
+
+	flag = le16_to_cpu(crq->desc[crq->next_to_use].flag);
+	while (hnae_get_bit(flag, HCLGEVF_CMDQ_RX_OUTVLD_B)) {
+		desc = &crq->desc[crq->next_to_use];
+		req = (struct hclge_mbx_pf_to_vf_cmd *)desc->data;
+
+		switch (req->msg[0]) {
+		case HCLGE_MBX_PF_VF_RESP:
+			if (resp->received_resp)
+				dev_warn(&hdev->pdev->dev,
+					 "VF mbx resp flag not clear(%d)\n",
+					 req->msg[1]);
+
+			resp->origin_mbx_msg = (req->msg[1] << 16);
+			resp->origin_mbx_msg |= req->msg[2];
+			resp->received_resp = true;
+
+			resp->resp_status = req->msg[3];
+
+			temp = (u8 *)&req->msg[4];
+			for (i = 0; i < HCLGE_MBX_MAX_RESP_DATA_SIZE; i++) {
+				resp->additional_info[i] = *temp;
+				temp++;
+			}
+			break;
+		case HCLGE_MBX_LINK_STAT_CHANGE:
+			link_status = le16_to_cpu(req->msg[1]);
+
+			/* update upper layer with new link link status */
+			hclgevf_update_link_status(hdev, link_status);
+
+			break;
+		default:
+			dev_err(&hdev->pdev->dev,
+				"VF received unsupported(%d) mbx msg from PF\n",
+				req->msg[0]);
+			break;
+		}
+		hclge_mbx_ring_ptr_move_crq(crq);
+		flag = le16_to_cpu(crq->desc[crq->next_to_use].flag);
+	}
+
+	/* Write back CMDQ_RQ header pointer, M7 need this pointer */
+	hclgevf_write_dev(&hdev->hw, HCLGEVF_NIC_CRQ_HEAD_REG,
+			  crq->next_to_use);
+}