diff mbox series

[2/4] examples/l3fwd-power: fix the timer for any platform freq

Message ID 20171212100826.20550-2-nikhil.agarwal@linaro.org
State New
Headers show
Series [1/4] examples/l3fwd-power: fix non Rx intr supported platform | expand

Commit Message

Nikhil Agarwal Dec. 12, 2017, 10:08 a.m. UTC
The code assumes that the platform frequency is 2GHz.
This patch add support for dynamically detecting platform frequence.

Fixes: d7937e2e3d12 ("power: initial import")
Cc: stable@dpdk.org

Signed-off-by: Nikhil Agarwal <nikhil.agarwal@linaro.org>

---
 examples/l3fwd-power/main.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

-- 
2.7.4

Comments

Hunt, David Dec. 13, 2017, 2:22 p.m. UTC | #1
On 12/12/2017 10:08 AM, Nikhil Agarwal wrote:
> The code assumes that the platform frequency is 2GHz.

> This patch add support for dynamically detecting platform frequence.

>

> Fixes: d7937e2e3d12 ("power: initial import")

> Cc: stable@dpdk.org

>

> Signed-off-by: Nikhil Agarwal <nikhil.agarwal@linaro.org>

> ---


---snip---

Acked-by: David Hunt <david.hunt@intel.com>
diff mbox series

Patch

diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c
index d335b0d..50c3702 100644
--- a/examples/l3fwd-power/main.c
+++ b/examples/l3fwd-power/main.c
@@ -79,8 +79,6 @@ 
 
 #define MIN_ZERO_POLL_COUNT 10
 
-/* around 100ms at 2 Ghz */
-#define TIMER_RESOLUTION_CYCLES           200000000ULL
 /* 100 ms interval */
 #define TIMER_NUMBER_PER_SECOND           10
 /* 100000 us */
@@ -875,7 +873,7 @@  main_loop(__attribute__((unused)) void *dummy)
 {
 	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
 	unsigned lcore_id;
-	uint64_t prev_tsc, diff_tsc, cur_tsc;
+	uint64_t prev_tsc, diff_tsc, cur_tsc, tim_res_tsc, hz;
 	uint64_t prev_tsc_power = 0, cur_tsc_power, diff_tsc_power;
 	int i, j, nb_rx;
 	uint8_t queueid;
@@ -890,6 +888,8 @@  main_loop(__attribute__((unused)) void *dummy)
 	const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
 
 	prev_tsc = 0;
+	hz = rte_get_timer_hz();
+	tim_res_tsc = hz/TIMER_NUMBER_PER_SECOND;
 
 	lcore_id = rte_lcore_id();
 	qconf = &lcore_conf[lcore_id];
@@ -935,7 +935,7 @@  main_loop(__attribute__((unused)) void *dummy)
 		}
 
 		diff_tsc_power = cur_tsc_power - prev_tsc_power;
-		if (diff_tsc_power > TIMER_RESOLUTION_CYCLES) {
+		if (diff_tsc_power > tim_res_tsc) {
 			rte_timer_manage();
 			prev_tsc_power = cur_tsc_power;
 		}