@@ -409,14 +409,14 @@ static void drm_framebuffer_remove_legacy(struct drm_framebuffer *fb)
}
list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
- if (plane->fb == fb) {
+ if (plane->state->fb == fb) {
/* should turn off the crtc */
ret = plane->funcs->disable_plane(plane);
if (ret)
DRM_ERROR("failed to disable plane with busy fb\n");
/* disconnect the plane from the fb and crtc: */
- plane->fb = NULL;
- plane->crtc = NULL;
+ plane->state->fb = NULL;
+ plane->state->crtc = NULL;
}
}
@@ -470,7 +470,7 @@ void drm_framebuffer_remove(struct drm_framebuffer *fb)
}
list_for_each_entry(plane, &dev->mode_config.plane_list, head) {
- if (plane->fb == fb) {
+ if (plane->state->fb == fb) {
/* should turn off the crtc */
drm_mode_plane_set_obj_prop(plane, state, config->prop_crtc_id, 0);
drm_mode_plane_set_obj_prop(plane, state, config->prop_fb_id, 0);
@@ -743,12 +743,21 @@ int drm_plane_init(struct drm_device *dev, struct drm_plane *plane,
mutex_lock(&dev->mode_config.mutex);
+ if (!dev_supports_atomic(dev)) {
+ plane->state = kzalloc(sizeof(*plane->state), GFP_KERNEL);
+ if (!plane->state) {
+ DRM_DEBUG_KMS("out of memory when allocating state\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+ }
+
ret = drm_mode_object_get(dev, &plane->base, DRM_MODE_OBJECT_PLANE);
if (ret)
goto out;
plane->base.properties = &plane->properties;
- plane->base.propvals = &plane->propvals;
+ plane->base.propvals = &plane->state->propvals;
plane->dev = dev;
plane->funcs = funcs;
plane->format_types = kmalloc(sizeof(uint32_t) * format_count,
@@ -812,6 +821,110 @@ void drm_plane_cleanup(struct drm_plane *plane)
}
EXPORT_SYMBOL(drm_plane_cleanup);
+int drm_plane_check_state(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ unsigned int fb_width, fb_height;
+ struct drm_framebuffer *fb = state->fb;
+ int i;
+
+ /* disabling the plane is allowed: */
+ if (!fb)
+ return 0;
+
+ fb_width = fb->width << 16;
+ fb_height = fb->height << 16;
+
+ /* Check whether this plane supports the fb pixel format. */
+ for (i = 0; i < plane->format_count; i++)
+ if (fb->pixel_format == plane->format_types[i])
+ break;
+ if (i == plane->format_count) {
+ DRM_DEBUG_KMS("Invalid pixel format 0x%08x\n", fb->pixel_format);
+ return -EINVAL;
+ }
+
+ /* Make sure source coordinates are inside the fb. */
+ if (state->src_w > fb_width ||
+ state->src_x > fb_width - state->src_w ||
+ state->src_h > fb_height ||
+ state->src_y > fb_height - state->src_h) {
+ DRM_DEBUG_KMS("Invalid source coordinates "
+ "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n",
+ state->src_w >> 16,
+ ((state->src_w & 0xffff) * 15625) >> 10,
+ state->src_h >> 16,
+ ((state->src_h & 0xffff) * 15625) >> 10,
+ state->src_x >> 16,
+ ((state->src_x & 0xffff) * 15625) >> 10,
+ state->src_y >> 16,
+ ((state->src_y & 0xffff) * 15625) >> 10);
+ return -ENOSPC;
+ }
+
+ /* Give drivers some help against integer overflows */
+ if (state->crtc_w > INT_MAX ||
+ state->crtc_x > INT_MAX - (int32_t) state->crtc_w ||
+ state->crtc_h > INT_MAX ||
+ state->crtc_y > INT_MAX - (int32_t) state->crtc_h) {
+ DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n",
+ state->crtc_w, state->crtc_h,
+ state->crtc_x, state->crtc_y);
+ return -ERANGE;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_plane_check_state);
+
+void drm_plane_commit_state(struct drm_plane *plane,
+ struct drm_plane_state *state)
+{
+ plane->state = state;
+ plane->base.propvals = &state->propvals;
+}
+EXPORT_SYMBOL(drm_plane_commit_state);
+
+int drm_plane_set_property(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ struct drm_property *property, uint64_t value)
+{
+ struct drm_device *dev = plane->dev;
+ struct drm_mode_config *config = &dev->mode_config;
+
+ drm_object_property_set_value(&plane->base,
+ &state->propvals, property, value);
+
+ if (property == config->prop_fb_id) {
+ struct drm_mode_object *obj = drm_property_get_obj(property, value);
+ state->fb = obj ? obj_to_fb(obj) : NULL;
+ } else if (property == config->prop_crtc_id) {
+ struct drm_mode_object *obj = drm_property_get_obj(property, value);
+ state->crtc = obj ? obj_to_crtc(obj) : NULL;
+ } else if (property == config->prop_crtc_x) {
+ state->crtc_x = U642I64(value);
+ } else if (property == config->prop_crtc_y) {
+ state->crtc_y = U642I64(value);
+ } else if (property == config->prop_crtc_w) {
+ state->crtc_w = value;
+ } else if (property == config->prop_crtc_h) {
+ state->crtc_h = value;
+ } else if (property == config->prop_src_x) {
+ state->src_x = value;
+ } else if (property == config->prop_src_y) {
+ state->src_y = value;
+ } else if (property == config->prop_src_w) {
+ state->src_w = value;
+ } else if (property == config->prop_src_h) {
+ state->src_h = value;
+ } else {
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_plane_set_property);
+
/**
* drm_mode_create - create a new display mode
* @dev: DRM device
@@ -1857,13 +1970,13 @@ int drm_mode_getplane(struct drm_device *dev, void *data,
}
plane = obj_to_plane(obj);
- if (plane->crtc)
- plane_resp->crtc_id = plane->crtc->base.id;
+ if (plane->state->crtc)
+ plane_resp->crtc_id = plane->state->crtc->base.id;
else
plane_resp->crtc_id = 0;
- if (plane->fb)
- plane_resp->fb_id = plane->fb->base.id;
+ if (plane->state->fb)
+ plane_resp->fb_id = plane->state->fb->base.id;
else
plane_resp->fb_id = 0;
@@ -1940,8 +2053,8 @@ static int drm_mode_setplane_legacy(struct drm_device *dev, void *data,
/* No fb means shut it down */
if (!plane_req->fb_id) {
plane->funcs->disable_plane(plane);
- plane->crtc = NULL;
- plane->fb = NULL;
+ plane->state->crtc = NULL;
+ plane->state->fb = NULL;
goto out;
}
@@ -2015,8 +2128,8 @@ static int drm_mode_setplane_legacy(struct drm_device *dev, void *data,
plane_req->src_x, plane_req->src_y,
plane_req->src_w, plane_req->src_h);
if (!ret) {
- plane->crtc = crtc;
- plane->fb = fb;
+ plane->state->crtc = crtc;
+ plane->state->fb = fb;
}
out:
@@ -3541,9 +3654,6 @@ int drm_mode_plane_set_obj_prop(struct drm_plane *plane,
if (plane->funcs->set_property)
ret = plane->funcs->set_property(plane, state, property, value);
- if (!ret)
- drm_object_property_set_value(&plane->base, &plane->propvals,
- property, value);
return ret;
}
@@ -168,7 +168,7 @@ static void omap_crtc_dpms(struct drm_crtc *crtc, int mode)
/* and any attached overlay planes: */
for (i = 0; i < priv->num_planes; i++) {
struct drm_plane *plane = priv->planes[i];
- if (plane->crtc == crtc)
+ if (plane->state->crtc == crtc)
WARN_ON(omap_plane_dpms(plane, mode));
}
}
@@ -605,7 +605,7 @@ struct drm_crtc *omap_crtc_init(struct drm_device *dev,
omap_crtc->channel = channel;
omap_crtc->plane = plane;
- omap_crtc->plane->crtc = crtc;
+ omap_crtc->plane->state->crtc = crtc;
omap_crtc->name = channel_names[channel];
omap_crtc->pipe = id;
@@ -528,7 +528,7 @@ static void dev_lastclose(struct drm_device *dev)
for (i = 0; i < priv->num_planes; i++) {
struct drm_plane *plane = priv->planes[i];
drm_object_property_set_value(&plane->base,
- &plane->propvals, priv->rotation_prop, 0);
+ &plane->state->propvals, priv->rotation_prop, 0);
}
mutex_lock(&dev->mode_config.mutex);
@@ -122,7 +122,7 @@ static void omap_plane_pre_apply(struct omap_drm_apply *apply)
struct drm_plane *plane = &omap_plane->base;
struct drm_device *dev = plane->dev;
struct omap_overlay_info *info = &omap_plane->info;
- struct drm_crtc *crtc = plane->crtc;
+ struct drm_crtc *crtc = plane->state->crtc;
enum omap_channel channel;
bool enabled = omap_plane->enabled && crtc;
bool ilace, replication;
@@ -131,7 +131,7 @@ static void omap_plane_pre_apply(struct omap_drm_apply *apply)
DBG("%s, enabled=%d", omap_plane->name, enabled);
/* if fb has changed, pin new fb: */
- update_pin(plane, enabled ? plane->fb : NULL);
+ update_pin(plane, enabled ? plane->state->fb : NULL);
if (!enabled) {
dispc_ovl_enable(omap_plane->id, false);
@@ -141,7 +141,7 @@ static void omap_plane_pre_apply(struct omap_drm_apply *apply)
channel = omap_crtc_channel(crtc);
/* update scanout: */
- omap_framebuffer_update_scanout(plane->fb, win, info);
+ omap_framebuffer_update_scanout(plane->state->fb, win, info);
DBG("%dx%d -> %dx%d (%d)", info->width, info->height,
info->out_width, info->out_height,
@@ -186,16 +186,16 @@ static void omap_plane_post_apply(struct omap_drm_apply *apply)
cb.fxn(cb.arg);
if (omap_plane->enabled) {
- omap_framebuffer_flush(plane->fb, info->pos_x, info->pos_y,
+ omap_framebuffer_flush(plane->state->fb, info->pos_x, info->pos_y,
info->out_width, info->out_height);
}
}
static int apply(struct drm_plane *plane)
{
- if (plane->crtc) {
+ if (plane->state->crtc) {
struct omap_plane *omap_plane = to_omap_plane(plane);
- return omap_crtc_apply(plane->crtc, &omap_plane->apply);
+ return omap_crtc_apply(plane->state->crtc, &omap_plane->apply);
}
return 0;
}
@@ -232,8 +232,8 @@ int omap_plane_mode_set(struct drm_plane *plane,
omap_plane->apply_done_cb.arg = arg;
}
- plane->fb = fb;
- plane->crtc = crtc;
+ plane->state->fb = fb;
+ plane->state->crtc = crtc;
return apply(plane);
}
@@ -648,6 +648,37 @@ struct drm_plane_funcs {
};
/**
+ * drm_plane_state - mutable plane state
+ * @crtc: currently bound CRTC
+ * @fb: currently bound fb
+ * @crtc_x: left position of visible portion of plane on crtc
+ * @crtc_y: upper position of visible portion of plane on crtc
+ * @crtc_w: width of visible portion of plane on crtc
+ * @crtc_h: height of visible portion of plane on crtc
+ * @src_x: left position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_y: upper position of visible portion of plane within
+ * plane (in 16.16)
+ * @src_w: width of visible portion of plane (in 16.16)
+ * @src_h: height of visible portion of plane (in 16.16)
+ * @propvals: property values
+ */
+struct drm_plane_state {
+ struct drm_crtc *crtc;
+ struct drm_framebuffer *fb;
+
+ /* Signed dest location allows it to be partially off screen */
+ int32_t crtc_x, crtc_y;
+ uint32_t crtc_w, crtc_h;
+
+ /* Source values are 16.16 fixed point */
+ uint32_t src_x, src_y;
+ uint32_t src_h, src_w;
+
+ struct drm_object_property_values propvals;
+};
+
+/**
* drm_plane - central DRM plane control structure
* @dev: DRM device this plane belongs to
* @head: for list management
@@ -655,11 +686,9 @@ struct drm_plane_funcs {
* @possible_crtcs: pipes this plane can be bound to
* @format_types: array of formats supported by this plane
* @format_count: number of formats supported
- * @crtc: currently bound CRTC
- * @fb: currently bound fb
+ * @state: the mutable state
* @gamma_size: size of gamma table
* @gamma_store: gamma correction table
- * @enabled: enabled flag
* @funcs: helper functions
* @helper_private: storage for drver layer
* @properties: property tracking for this plane
@@ -674,20 +703,20 @@ struct drm_plane {
uint32_t *format_types;
uint32_t format_count;
- struct drm_crtc *crtc;
- struct drm_framebuffer *fb;
+ /*
+ * State that can be updated from userspace, and atomically
+ * commited or rolled back:
+ */
+ struct drm_plane_state *state;
/* CRTC gamma size for reporting to userspace */
uint32_t gamma_size;
uint16_t *gamma_store;
- bool enabled;
-
const struct drm_plane_funcs *funcs;
void *helper_private;
struct drm_object_properties properties;
- struct drm_object_property_values propvals;
};
/**
@@ -895,6 +924,13 @@ extern int drm_plane_init(struct drm_device *dev,
const uint32_t *formats, uint32_t format_count,
bool priv);
extern void drm_plane_cleanup(struct drm_plane *plane);
+extern int drm_plane_check_state(struct drm_plane *plane,
+ struct drm_plane_state *state);
+extern void drm_plane_commit_state(struct drm_plane *plane,
+ struct drm_plane_state *state);
+extern int drm_plane_set_property(struct drm_plane *plane,
+ struct drm_plane_state *state,
+ struct drm_property *property, uint64_t value);
extern void drm_encoder_cleanup(struct drm_encoder *encoder);
From: Rob Clark <rob@ti.com> Break the mutable state of a plane out into a separate structure. This makes it easier to have some helpers for plane->set_property() and for checking for invalid params. The idea is that individual drivers can wrap the state struct in their own struct which adds driver specific parameters, for easy build-up of state across multiple set_property() calls and for easy atomic commit or roll- back. The same should be done for CRTC, encoder, and connector, but this patch only includes the first part (plane). --- drivers/gpu/drm/drm_crtc.c | 142 ++++++++++++++++++++++++++++++---- drivers/staging/omapdrm/omap_crtc.c | 4 +- drivers/staging/omapdrm/omap_drv.c | 2 +- drivers/staging/omapdrm/omap_plane.c | 16 ++-- include/drm/drm_crtc.h | 52 +++++++++++-- 5 files changed, 181 insertions(+), 35 deletions(-)