diff mbox series

[02/05] arm: mach-snapdragon: refactor clock driver

Message ID 1515148154-30138-2-git-send-email-jorge.ramirez-ortiz@linaro.org
State Accepted
Commit 7c75f7f1b29eb53912b75472f4d8135c465f87f5
Headers show
Series [01/05] env: enable accessing the environment in an EXT4 partition | expand

Commit Message

Jorge Ramirez-Ortiz Jan. 5, 2018, 10:29 a.m. UTC
In preparation to add support for the Dragonboard820c (APQ8096),
refactor the current Snapdragon clock driver.

No new functionality has been added.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
---
 arch/arm/mach-snapdragon/Makefile                  |   6 +-
 arch/arm/mach-snapdragon/clock-apq8016.c           | 181 ++-------------------
 arch/arm/mach-snapdragon/clock-snapdragon.c        | 134 +++++++++++++++
 arch/arm/mach-snapdragon/clock-snapdragon.h        |  40 +++++
 .../mach-snapdragon/include/mach/sysmap-apq8016.h  |  29 +++-
 5 files changed, 217 insertions(+), 173 deletions(-)
 create mode 100644 arch/arm/mach-snapdragon/clock-snapdragon.c
 create mode 100644 arch/arm/mach-snapdragon/clock-snapdragon.h
diff mbox series

Patch

diff --git a/arch/arm/mach-snapdragon/Makefile b/arch/arm/mach-snapdragon/Makefile
index d82a04d..74f90dc 100644
--- a/arch/arm/mach-snapdragon/Makefile
+++ b/arch/arm/mach-snapdragon/Makefile
@@ -4,5 +4,6 @@ 
 # SPDX-License-Identifier:	GPL-2.0+
 #
 
-obj-y += clock-apq8016.o
-obj-y += sysmap-apq8016.o
+obj-$(CONFIG_TARGET_DRAGONBOARD410C) += clock-apq8016.o
+obj-$(CONFIG_TARGET_DRAGONBOARD410C) += sysmap-apq8016.o
+obj-y += clock-snapdragon.o
diff --git a/arch/arm/mach-snapdragon/clock-apq8016.c b/arch/arm/mach-snapdragon/clock-apq8016.c
index da05015..a242417 100644
--- a/arch/arm/mach-snapdragon/clock-apq8016.c
+++ b/arch/arm/mach-snapdragon/clock-apq8016.c
@@ -14,146 +14,12 @@ 
 #include <errno.h>
 #include <asm/io.h>
 #include <linux/bitops.h>
+#include "clock-snapdragon.h"
 
 /* GPLL0 clock control registers */
-#define GPLL0_STATUS        0x2101C
 #define GPLL0_STATUS_ACTIVE BIT(17)
-
-#define APCS_GPLL_ENA_VOTE  0x45000
 #define APCS_GPLL_ENA_VOTE_GPLL0 BIT(0)
 
-/* vote reg for blsp1 clock */
-#define APCS_CLOCK_BRANCH_ENA_VOTE  0x45004
-#define APCS_CLOCK_BRANCH_ENA_VOTE_BLSP1 BIT(10)
-
-/* SDC(n) clock control registers; n=1,2 */
-
-/* block control register */
-#define SDCC_BCR(n)                 ((n * 0x1000) + 0x41000)
-/* cmd */
-#define SDCC_CMD_RCGR(n)            ((n * 0x1000) + 0x41004)
-/* cfg */
-#define SDCC_CFG_RCGR(n)            ((n * 0x1000) + 0x41008)
-/* m */
-#define SDCC_M(n)                   ((n * 0x1000) + 0x4100C)
-/* n */
-#define SDCC_N(n)                   ((n * 0x1000) + 0x41010)
-/* d */
-#define SDCC_D(n)                   ((n * 0x1000) + 0x41014)
-/* branch control */
-#define SDCC_APPS_CBCR(n)           ((n * 0x1000) + 0x41018)
-#define SDCC_AHB_CBCR(n)            ((n * 0x1000) + 0x4101C)
-
-/* BLSP1 AHB clock (root clock for BLSP) */
-#define BLSP1_AHB_CBCR              0x1008
-
-/* Uart clock control registers */
-#define BLSP1_UART2_BCR             0x3028
-#define BLSP1_UART2_APPS_CBCR       0x302C
-#define BLSP1_UART2_APPS_CMD_RCGR   0x3034
-#define BLSP1_UART2_APPS_CFG_RCGR   0x3038
-#define BLSP1_UART2_APPS_M          0x303C
-#define BLSP1_UART2_APPS_N          0x3040
-#define BLSP1_UART2_APPS_D          0x3044
-
-/* CBCR register fields */
-#define CBCR_BRANCH_ENABLE_BIT  BIT(0)
-#define CBCR_BRANCH_OFF_BIT     BIT(31)
-
-struct msm_clk_priv {
-	phys_addr_t base;
-};
-
-/* Enable clock controlled by CBC soft macro */
-static void clk_enable_cbc(phys_addr_t cbcr)
-{
-	setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);
-
-	while (readl(cbcr) & CBCR_BRANCH_OFF_BIT)
-		;
-}
-
-/* clock has 800MHz */
-static void clk_enable_gpll0(phys_addr_t base)
-{
-	if (readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE)
-		return; /* clock already enabled */
-
-	setbits_le32(base + APCS_GPLL_ENA_VOTE, APCS_GPLL_ENA_VOTE_GPLL0);
-
-	while ((readl(base + GPLL0_STATUS) & GPLL0_STATUS_ACTIVE) == 0)
-		;
-}
-
-#define APPS_CMD_RGCR_UPDATE BIT(0)
-
-/* Update clock command via CMD_RGCR */
-static void clk_bcr_update(phys_addr_t apps_cmd_rgcr)
-{
-	setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);
-
-	/* Wait for frequency to be updated. */
-	while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE)
-		;
-}
-
-struct bcr_regs {
-	uintptr_t cfg_rcgr;
-	uintptr_t cmd_rcgr;
-	uintptr_t M;
-	uintptr_t N;
-	uintptr_t D;
-};
-
-/* RCGR_CFG register fields */
-#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
-
-/* sources */
-#define CFG_CLK_SRC_CXO   (0 << 8)
-#define CFG_CLK_SRC_GPLL0 (1 << 8)
-#define CFG_CLK_SRC_MASK  (7 << 8)
-
-/* Mask for supported fields */
-#define CFG_MASK 0x3FFF
-
-#define CFG_DIVIDER_MASK 0x1F
-
-/* root set rate for clocks with half integer and MND divider */
-static void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
-				 int div, int m, int n, int source)
-{
-	uint32_t cfg;
-	/* M value for MND divider. */
-	uint32_t m_val = m;
-	/* NOT(N-M) value for MND divider. */
-	uint32_t n_val = ~((n)-(m)) * !!(n);
-	/* NOT 2D value for MND divider. */
-	uint32_t d_val = ~(n);
-
-	/* Program MND values */
-	writel(m_val, base + regs->M);
-	writel(n_val, base + regs->N);
-	writel(d_val, base + regs->D);
-
-	/* setup src select and divider */
-	cfg  = readl(base + regs->cfg_rcgr);
-	cfg &= ~CFG_MASK;
-	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
-
-	/* Set the divider; HW permits fraction dividers (+0.5), but
-	   for simplicity, we will support integers only */
-	if (div)
-		cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
-
-	if (n_val)
-		cfg |= CFG_MODE_DUAL_EDGE;
-
-	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
-
-	/* Inform h/w to start using the new config. */
-	clk_bcr_update(base + regs->cmd_rcgr);
-}
-
 static const struct bcr_regs sdc_regs[] = {
 	{
 	.cfg_rcgr = SDCC_CFG_RCGR(1),
@@ -171,7 +37,14 @@  static const struct bcr_regs sdc_regs[] = {
 	}
 };
 
-/* Init clock for SDHCI controller */
+static struct gpll0_ctrl gpll0_ctrl = {
+	.status = GPLL0_STATUS,
+	.status_bit = GPLL0_STATUS_ACTIVE,
+	.ena_vote = APCS_GPLL_ENA_VOTE,
+	.vote_bit = APCS_GPLL_ENA_VOTE_GPLL0,
+};
+
+/* SDHCI */
 static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
 {
 	int div = 8; /* 100MHz default */
@@ -183,7 +56,7 @@  static int clk_init_sdc(struct msm_clk_priv *priv, int slot, uint rate)
 	/* 800Mhz/div, gpll0 */
 	clk_rcg_set_rate_mnd(priv->base, &sdc_regs[slot], div, 0, 0,
 			     CFG_CLK_SRC_GPLL0);
-	clk_enable_gpll0(priv->base);
+	clk_enable_gpll0(priv->base, &gpll0_ctrl);
 	clk_enable_cbc(priv->base + SDCC_APPS_CBCR(slot));
 
 	return rate;
@@ -197,7 +70,7 @@  static const struct bcr_regs uart2_regs = {
 	.D = BLSP1_UART2_APPS_D,
 };
 
-/* Init UART clock, 115200 */
+/* UART: 115200 */
 static int clk_init_uart(struct msm_clk_priv *priv)
 {
 	/* Enable iface clk */
@@ -205,7 +78,7 @@  static int clk_init_uart(struct msm_clk_priv *priv)
 	/* 7372800 uart block clock @ GPLL0 */
 	clk_rcg_set_rate_mnd(priv->base, &uart2_regs, 1, 144, 15625,
 			     CFG_CLK_SRC_GPLL0);
-	clk_enable_gpll0(priv->base);
+	clk_enable_gpll0(priv->base, &gpll0_ctrl);
 	/* Enable core clk */
 	clk_enable_cbc(priv->base + BLSP1_UART2_APPS_CBCR);
 
@@ -230,33 +103,3 @@  ulong msm_set_rate(struct clk *clk, ulong rate)
 		return 0;
 	}
 }
-
-static int msm_clk_probe(struct udevice *dev)
-{
-	struct msm_clk_priv *priv = dev_get_priv(dev);
-
-	priv->base = devfdt_get_addr(dev);
-	if (priv->base == FDT_ADDR_T_NONE)
-		return -EINVAL;
-
-	return 0;
-}
-
-static struct clk_ops msm_clk_ops = {
-	.set_rate = msm_set_rate,
-};
-
-static const struct udevice_id msm_clk_ids[] = {
-	{ .compatible = "qcom,gcc-msm8916" },
-	{ .compatible = "qcom,gcc-apq8016" },
-	{ }
-};
-
-U_BOOT_DRIVER(clk_msm) = {
-	.name		= "clk_msm",
-	.id		= UCLASS_CLK,
-	.of_match	= msm_clk_ids,
-	.ops		= &msm_clk_ops,
-	.priv_auto_alloc_size = sizeof(struct msm_clk_priv),
-	.probe		= msm_clk_probe,
-};
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.c b/arch/arm/mach-snapdragon/clock-snapdragon.c
new file mode 100644
index 0000000..da44544
--- /dev/null
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.c
@@ -0,0 +1,134 @@ 
+/*
+ * Clock drivers for Qualcomm APQ8016, APQ8096
+ *
+ * (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
+ *
+ * Based on Little Kernel driver, simplified
+ *
+ * SPDX-License-Identifier:	BSD-3-Clause
+ */
+
+#include <common.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <asm/io.h>
+#include <linux/bitops.h>
+#include "clock-snapdragon.h"
+
+/* CBCR register fields */
+#define CBCR_BRANCH_ENABLE_BIT  BIT(0)
+#define CBCR_BRANCH_OFF_BIT     BIT(31)
+
+extern ulong msm_set_rate(struct clk *clk, ulong rate);
+
+/* Enable clock controlled by CBC soft macro */
+void clk_enable_cbc(phys_addr_t cbcr)
+{
+	setbits_le32(cbcr, CBCR_BRANCH_ENABLE_BIT);
+
+	while (readl(cbcr) & CBCR_BRANCH_OFF_BIT)
+		;
+}
+
+void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *gpll0)
+{
+	if (readl(base + gpll0->status) & gpll0->status_bit)
+		return; /* clock already enabled */
+
+	setbits_le32(base + gpll0->ena_vote, gpll0->vote_bit);
+
+	while ((readl(base + gpll0->status) & gpll0->status_bit) == 0)
+		;
+}
+
+#define APPS_CMD_RGCR_UPDATE BIT(0)
+
+/* Update clock command via CMD_RGCR */
+void clk_bcr_update(phys_addr_t apps_cmd_rgcr)
+{
+	setbits_le32(apps_cmd_rgcr, APPS_CMD_RGCR_UPDATE);
+
+	/* Wait for frequency to be updated. */
+	while (readl(apps_cmd_rgcr) & APPS_CMD_RGCR_UPDATE)
+		;
+}
+
+#define CFG_MODE_DUAL_EDGE (0x2 << 12) /* Counter mode */
+
+#define CFG_MASK 0x3FFF
+
+#define CFG_DIVIDER_MASK 0x1F
+
+/* root set rate for clocks with half integer and MND divider */
+void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+				 int div, int m, int n, int source)
+{
+	uint32_t cfg;
+	/* M value for MND divider. */
+	uint32_t m_val = m;
+	/* NOT(N-M) value for MND divider. */
+	uint32_t n_val = ~((n)-(m)) * !!(n);
+	/* NOT 2D value for MND divider. */
+	uint32_t d_val = ~(n);
+
+	/* Program MND values */
+	writel(m_val, base + regs->M);
+	writel(n_val, base + regs->N);
+	writel(d_val, base + regs->D);
+
+	/* setup src select and divider */
+	cfg  = readl(base + regs->cfg_rcgr);
+	cfg &= ~CFG_MASK;
+	cfg |= source & CFG_CLK_SRC_MASK; /* Select clock source */
+
+	/* Set the divider; HW permits fraction dividers (+0.5), but
+	   for simplicity, we will support integers only */
+	if (div)
+		cfg |= (2 * div - 1) & CFG_DIVIDER_MASK;
+
+	if (n_val)
+		cfg |= CFG_MODE_DUAL_EDGE;
+
+	writel(cfg, base + regs->cfg_rcgr); /* Write new clock configuration */
+
+	/* Inform h/w to start using the new config. */
+	clk_bcr_update(base + regs->cmd_rcgr);
+}
+
+static int msm_clk_probe(struct udevice *dev)
+{
+	struct msm_clk_priv *priv = dev_get_priv(dev);
+
+	priv->base = devfdt_get_addr(dev);
+	if (priv->base == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	return 0;
+}
+
+static ulong msm_clk_set_rate(struct clk *clk, ulong rate)
+{
+	return msm_set_rate(clk, rate);
+}
+
+static struct clk_ops msm_clk_ops = {
+	.set_rate = msm_clk_set_rate,
+};
+
+static const struct udevice_id msm_clk_ids[] = {
+	{ .compatible = "qcom,gcc-msm8916" },
+	{ .compatible = "qcom,gcc-apq8016" },
+	{ .compatible = "qcom,gcc-msm8996" },
+	{ .compatible = "qcom,gcc-apq8096" },
+	{ }
+};
+
+U_BOOT_DRIVER(clk_msm) = {
+	.name		= "clk_msm",
+	.id		= UCLASS_CLK,
+	.of_match	= msm_clk_ids,
+	.ops		= &msm_clk_ops,
+	.priv_auto_alloc_size = sizeof(struct msm_clk_priv),
+	.probe		= msm_clk_probe,
+};
diff --git a/arch/arm/mach-snapdragon/clock-snapdragon.h b/arch/arm/mach-snapdragon/clock-snapdragon.h
new file mode 100644
index 0000000..c087eb9
--- /dev/null
+++ b/arch/arm/mach-snapdragon/clock-snapdragon.h
@@ -0,0 +1,40 @@ 
+/*
+ * Qualcomm APQ8016, APQ8096
+ *
+ * (C) Copyright 2017 Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+#ifndef _CLOCK_SNAPDRAGON_H
+#define _CLOCK_SNAPDRAGON_H
+
+#define CFG_CLK_SRC_CXO   (0 << 8)
+#define CFG_CLK_SRC_GPLL0 (1 << 8)
+#define CFG_CLK_SRC_MASK  (7 << 8)
+
+struct gpll0_ctrl {
+	uintptr_t status;
+	int status_bit;
+	uintptr_t ena_vote;
+	int vote_bit;
+};
+
+struct bcr_regs {
+	uintptr_t cfg_rcgr;
+	uintptr_t cmd_rcgr;
+	uintptr_t M;
+	uintptr_t N;
+	uintptr_t D;
+};
+
+struct msm_clk_priv {
+	phys_addr_t base;
+};
+
+void clk_enable_gpll0(phys_addr_t base, const struct gpll0_ctrl *pll0);
+void clk_bcr_update(phys_addr_t apps_cmd_rgcr);
+void clk_enable_cbc(phys_addr_t cbcr);
+void clk_rcg_set_rate_mnd(phys_addr_t base, const struct bcr_regs *regs,
+				 int div, int m, int n, int source);
+
+#endif
diff --git a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
index cdbfad0..1094b14 100644
--- a/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
+++ b/arch/arm/mach-snapdragon/include/mach/sysmap-apq8016.h
@@ -8,7 +8,32 @@ 
 #ifndef _MACH_SYSMAP_APQ8016_H
 #define _MACH_SYSMAP_APQ8016_H
 
-#define GICD_BASE 0x0b000000
-#define GICC_BASE 0x0a20c000
+#define GICD_BASE			(0x0b000000)
+#define GICC_BASE			(0x0a20c000)
+
+/* Clocks: (from CLK_CTL_BASE)  */
+#define GPLL0_STATUS			(0x2101C)
+#define APCS_GPLL_ENA_VOTE		(0x45000)
+
+#define SDCC_BCR(n)			((n * 0x1000) + 0x41000)
+#define SDCC_CMD_RCGR(n)		((n * 0x1000) + 0x41004)
+#define SDCC_CFG_RCGR(n)		((n * 0x1000) + 0x41008)
+#define SDCC_M(n)			((n * 0x1000) + 0x4100C)
+#define SDCC_N(n)			((n * 0x1000) + 0x41010)
+#define SDCC_D(n)			((n * 0x1000) + 0x41014)
+#define SDCC_APPS_CBCR(n)		((n * 0x1000) + 0x41018)
+#define SDCC_AHB_CBCR(n)		((n * 0x1000) + 0x4101C)
+
+/* BLSP1 AHB clock (root clock for BLSP) */
+#define BLSP1_AHB_CBCR			0x1008
+
+/* Uart clock control registers */
+#define BLSP1_UART2_BCR			(0x3028)
+#define BLSP1_UART2_APPS_CBCR		(0x302C)
+#define BLSP1_UART2_APPS_CMD_RCGR	(0x3034)
+#define BLSP1_UART2_APPS_CFG_RCGR	(0x3038)
+#define BLSP1_UART2_APPS_M		(0x303C)
+#define BLSP1_UART2_APPS_N		(0x3040)
+#define BLSP1_UART2_APPS_D		(0x3044)
 
 #endif