diff mbox series

[v6,03/25] arm: imx: hab: Optimise flow of authenticate_image on is_enabled fail

Message ID 1515760819-15116-4-git-send-email-bryan.odonoghue@linaro.org
State Accepted
Commit d2c61800fc1ece786799262c71d4789b0fa56279
Headers show
Series Fix and extend i.MX HAB layer | expand

Commit Message

Bryan O'Donoghue Jan. 12, 2018, 12:39 p.m. UTC 
There is no need to call is_enabled() twice in authenticate_image - it does
nothing but add an additional layer of indentation.

We can check for is_enabled() at the start of the function and return the
result code directly.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Sven Ebenfeld <sven.ebenfeld@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Breno Matheus Lima <brenomatheus@gmail.com>
Tested-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
---
 arch/arm/mach-imx/hab.c | 138 ++++++++++++++++++++++++------------------------
 1 file changed, 69 insertions(+), 69 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/mach-imx/hab.c b/arch/arm/mach-imx/hab.c
index 9fe6d43..6f86c02 100644
--- a/arch/arm/mach-imx/hab.c
+++ b/arch/arm/mach-imx/hab.c
@@ -428,91 +428,91 @@  int authenticate_image(uint32_t ddr_start, uint32_t image_size)
 	hab_rvt_entry = hab_rvt_entry_p;
 	hab_rvt_exit = hab_rvt_exit_p;
 
-	if (is_hab_enabled()) {
-		printf("\nAuthenticate image from DDR location 0x%x...\n",
-		       ddr_start);
+	if (!is_hab_enabled()) {
+		puts("hab fuse not enabled\n");
+		return result;
+	}
 
-		hab_caam_clock_enable(1);
+	printf("\nAuthenticate image from DDR location 0x%x...\n",
+	       ddr_start);
 
-		if (hab_rvt_entry() == HAB_SUCCESS) {
-			/* If not already aligned, Align to ALIGN_SIZE */
-			ivt_offset = (image_size + ALIGN_SIZE - 1) &
-					~(ALIGN_SIZE - 1);
+	hab_caam_clock_enable(1);
 
-			start = ddr_start;
-			bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
+	if (hab_rvt_entry() == HAB_SUCCESS) {
+		/* If not already aligned, Align to ALIGN_SIZE */
+		ivt_offset = (image_size + ALIGN_SIZE - 1) &
+				~(ALIGN_SIZE - 1);
+
+		start = ddr_start;
+		bytes = ivt_offset + IVT_SIZE + CSF_PAD_SIZE;
 #ifdef DEBUG
-			printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n",
-			       ivt_offset, ddr_start + ivt_offset);
-			puts("Dumping IVT\n");
-			print_buffer(ddr_start + ivt_offset,
-				     (void *)(ddr_start + ivt_offset),
-				     4, 0x8, 0);
-
-			puts("Dumping CSF Header\n");
-			print_buffer(ddr_start + ivt_offset+IVT_SIZE,
-				     (void *)(ddr_start + ivt_offset+IVT_SIZE),
-				     4, 0x10, 0);
+		printf("\nivt_offset = 0x%x, ivt addr = 0x%x\n",
+		       ivt_offset, ddr_start + ivt_offset);
+		puts("Dumping IVT\n");
+		print_buffer(ddr_start + ivt_offset,
+			     (void *)(ddr_start + ivt_offset),
+			     4, 0x8, 0);
+
+		puts("Dumping CSF Header\n");
+		print_buffer(ddr_start + ivt_offset + IVT_SIZE,
+			     (void *)(ddr_start + ivt_offset + IVT_SIZE),
+			     4, 0x10, 0);
 
 #if  !defined(CONFIG_SPL_BUILD)
-			get_hab_status();
+		get_hab_status();
 #endif
 
-			puts("\nCalling authenticate_image in ROM\n");
-			printf("\tivt_offset = 0x%x\n", ivt_offset);
-			printf("\tstart = 0x%08lx\n", start);
-			printf("\tbytes = 0x%x\n", bytes);
+		puts("\nCalling authenticate_image in ROM\n");
+		printf("\tivt_offset = 0x%x\n", ivt_offset);
+		printf("\tstart = 0x%08lx\n", start);
+		printf("\tbytes = 0x%x\n", bytes);
 #endif
-			/*
-			 * If the MMU is enabled, we have to notify the ROM
-			 * code, or it won't flush the caches when needed.
-			 * This is done, by setting the "pu_irom_mmu_enabled"
-			 * word to 1. You can find its address by looking in
-			 * the ROM map. This is critical for
-			 * authenticate_image(). If MMU is enabled, without
-			 * setting this bit, authentication will fail and may
-			 * crash.
-			 */
-			/* Check MMU enabled */
-			if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) {
-				if (is_mx6dq()) {
-					/*
-					 * This won't work on Rev 1.0.0 of
-					 * i.MX6Q/D, since their ROM doesn't
-					 * do cache flushes. don't think any
-					 * exist, so we ignore them.
-					 */
-					if (!is_mx6dqp())
-						writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
-				} else if (is_mx6sdl()) {
-					writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
-				} else if (is_mx6sl()) {
-					writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
-				}
+		/*
+		 * If the MMU is enabled, we have to notify the ROM
+		 * code, or it won't flush the caches when needed.
+		 * This is done, by setting the "pu_irom_mmu_enabled"
+		 * word to 1. You can find its address by looking in
+		 * the ROM map. This is critical for
+		 * authenticate_image(). If MMU is enabled, without
+		 * setting this bit, authentication will fail and may
+		 * crash.
+		 */
+		/* Check MMU enabled */
+		if (is_soc_type(MXC_SOC_MX6) && get_cr() & CR_M) {
+			if (is_mx6dq()) {
+				/*
+				 * This won't work on Rev 1.0.0 of
+				 * i.MX6Q/D, since their ROM doesn't
+				 * do cache flushes. don't think any
+				 * exist, so we ignore them.
+				 */
+				if (!is_mx6dqp())
+					writel(1, MX6DQ_PU_IROM_MMU_EN_VAR);
+			} else if (is_mx6sdl()) {
+				writel(1, MX6DLS_PU_IROM_MMU_EN_VAR);
+			} else if (is_mx6sl()) {
+				writel(1, MX6SL_PU_IROM_MMU_EN_VAR);
 			}
+		}
 
-			load_addr = (uint32_t)hab_rvt_authenticate_image(
-					HAB_CID_UBOOT,
-					ivt_offset, (void **)&start,
-					(size_t *)&bytes, NULL);
-			if (hab_rvt_exit() != HAB_SUCCESS) {
-				puts("hab exit function fail\n");
-				load_addr = 0;
-			}
-		} else {
-			puts("hab entry function fail\n");
+		load_addr = (uint32_t)hab_rvt_authenticate_image(
+				HAB_CID_UBOOT,
+				ivt_offset, (void **)&start,
+				(size_t *)&bytes, NULL);
+		if (hab_rvt_exit() != HAB_SUCCESS) {
+			puts("hab exit function fail\n");
+			load_addr = 0;
 		}
+	} else {
+		puts("hab entry function fail\n");
+	}
 
-		hab_caam_clock_enable(0);
+	hab_caam_clock_enable(0);
 
 #if !defined(CONFIG_SPL_BUILD)
-		get_hab_status();
+	get_hab_status();
 #endif
-	} else {
-		puts("hab fuse not enabled\n");
-	}
-
-	if ((!is_hab_enabled()) || (load_addr != 0))
+	if (load_addr != 0)
 		result = 0;
 
 	return result;