@@ -161,6 +161,7 @@ static const table_entry_t uimage_type[] = {
{ IH_TYPE_TEE, "tee", "Trusted Execution Environment Image",},
{ IH_TYPE_FIRMWARE_IVT, "firmware_ivt", "Firmware with HABv4 IVT" },
{ IH_TYPE_PMMC, "pmmc", "TI Power Management Micro-Controller Firmware",},
+ { IH_TYPE_OPTEE, "optee", "OPTEE Boot Image",},
{ -1, "", "", },
};
@@ -271,6 +271,7 @@ enum {
IH_TYPE_TEE, /* Trusted Execution Environment OS Image */
IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */
IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */
+ IH_TYPE_OPTEE, /* OPTEE Boot Image */
IH_TYPE_COUNT, /* Number of image types */
};
@@ -18,6 +18,7 @@
#include "mkimage.h"
#include <image.h>
+#include <tee/optee.h>
#include <u-boot/crc.h>
static image_header_t header;
@@ -25,7 +26,8 @@ static image_header_t header;
static int image_check_image_types(uint8_t type)
{
if (((type > IH_TYPE_INVALID) && (type < IH_TYPE_FLATDT)) ||
- (type == IH_TYPE_KERNEL_NOLOAD) || (type == IH_TYPE_FIRMWARE_IVT))
+ (type == IH_TYPE_KERNEL_NOLOAD) || (type == IH_TYPE_FIRMWARE_IVT) ||
+ (type == IH_TYPE_OPTEE))
return EXIT_SUCCESS;
else
return EXIT_FAILURE;
@@ -90,6 +92,8 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd,
uint32_t checksum;
time_t time;
uint32_t imagesize;
+ uint32_t ep;
+ uint32_t addr;
image_header_t * hdr = (image_header_t *)ptr;
@@ -99,18 +103,27 @@ static void image_set_header(void *ptr, struct stat *sbuf, int ifd,
sbuf->st_size - sizeof(image_header_t));
time = imagetool_get_source_date(params, sbuf->st_mtime);
- if (params->type == IH_TYPE_FIRMWARE_IVT)
+ ep = params->ep;
+ addr = params->addr;
+ imagesize = sbuf->st_size - sizeof(image_header_t);
+
+ switch (params->type) {
+ case IH_TYPE_FIRMWARE_IVT:
/* Add size of CSF minus IVT */
imagesize = sbuf->st_size - sizeof(image_header_t) + 0x1FE0;
- else
- imagesize = sbuf->st_size - sizeof(image_header_t);
+ break;
+ case IH_TYPE_OPTEE:
+ addr = optee_image_get_load_addr(hdr);
+ ep = optee_image_get_entry_point(hdr);
+ break;
+ }
/* Build new header */
image_set_magic(hdr, IH_MAGIC);
image_set_time(hdr, time);
image_set_size(hdr, imagesize);
- image_set_load(hdr, params->addr);
- image_set_ep(hdr, params->ep);
+ image_set_load(hdr, addr);
+ image_set_ep(hdr, ep);
image_set_dcrc(hdr, checksum);
image_set_os(hdr, params->os);
image_set_arch(hdr, params->arch);
This patch adds support for bootable OPTEE images to mkimage. Currently there is a (Trusted Execution Environment) TEE image type, the TEE image type is installed to a memory location with u-boot continuing to own the boot process whereas the OPTEE image type defined here is a bootable image, which typically wants to live at a defined location in memory. Defining a new image type allows us to pull out the load address and entry point defined in the OPTEE header and having a separate image type lays the foundation for a subsequent patch to validate the OPTEE memory defined in a board-port matches the link location specified in the OPTEE bootable image. example usage: mkimage -A arm -T optee -C none -d ./out/arm-plat-imx/core/tee.bin uTee.optee Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Harinarayan Bhatta <harinarayan@ti.com> Cc: Andrew F. Davis <afd@ti.com> Cc: Tom Rini <trini@konsulko.com> Cc: Kever Yang <kever.yang@rock-chips.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Cc: Peng Fan <peng.fan@nxp.com> --- common/image.c | 1 + include/image.h | 1 + tools/default_image.c | 25 +++++++++++++++++++------ 3 files changed, 21 insertions(+), 6 deletions(-)