diff mbox

[2/9,V4] SOUND: Add WM8994 codec

Message ID 1351230570-21597-3-git-send-email-rajeshwari.s@samsung.com
State Accepted
Commit a2d8e0a717b01995eac162de205c90b3ea782440
Headers show

Commit Message

Rajeshwari Shinde Oct. 26, 2012, 5:49 a.m. UTC
This patch adds driver for audio codec WM8994

Signed-off-by: R. Chandrasekar <rcsekar@samsung.com>
Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
Acked-by: Simon Glass <sjg@chromium.org>
---
Changes in V2:
- None
Changes in V3:
- Incorporated comments from Simon Glass.
Changes in V4:
- None
 drivers/sound/Makefile           |    1 +
 drivers/sound/wm8994.c           |  792 ++++++++++++++++++++++++++++++++++++++
 drivers/sound/wm8994.h           |   87 +++++
 drivers/sound/wm8994_registers.h |  299 ++++++++++++++
 4 files changed, 1179 insertions(+), 0 deletions(-)
 create mode 100644 drivers/sound/wm8994.c
 create mode 100644 drivers/sound/wm8994.h
 create mode 100644 drivers/sound/wm8994_registers.h
diff mbox

Patch

diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile
index 18ad2c9..8fdffb1 100644
--- a/drivers/sound/Makefile
+++ b/drivers/sound/Makefile
@@ -27,6 +27,7 @@  LIB	:= $(obj)libsound.o
 
 COBJS-$(CONFIG_SOUND)	+= sound.o
 COBJS-$(CONFIG_I2S)	+= samsung-i2s.o
+COBJS-$(CONFIG_SOUND_WM8994)	+= wm8994.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c
new file mode 100644
index 0000000..293903a
--- /dev/null
+++ b/drivers/sound/wm8994.c
@@ -0,0 +1,792 @@ 
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chandrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <asm/arch/clk.h>
+#include <asm/arch/cpu.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <common.h>
+#include <div64.h>
+#include <i2c.h>
+#include <i2s.h>
+#include <sound.h>
+#include "wm8994.h"
+#include "wm8994_registers.h"
+
+/* defines for wm8994 system clock selection */
+#define SEL_MCLK1	0x00
+#define SEL_MCLK2	0x08
+#define SEL_FLL1	0x10
+#define SEL_FLL2	0x18
+
+/* fll config to configure fll */
+struct wm8994_fll_config {
+	int src;	/* Source */
+	int in;		/* Input frequency in Hz */
+	int out;	/* output frequency in Hz */
+};
+
+/* codec private data */
+struct wm8994_priv {
+	enum wm8994_type type;		/* codec type of wolfson */
+	int revision;			/* Revision */
+	int sysclk[WM8994_MAX_AIF];	/* System clock frequency in Hz  */
+	int mclk[WM8994_MAX_AIF];	/* master clock frequency in Hz */
+	int aifclk[WM8994_MAX_AIF];	/* audio interface clock in Hz   */
+	struct wm8994_fll_config fll[2]; /* fll config to configure fll */
+};
+
+/* wm 8994 supported sampling rate values */
+static unsigned int src_rate[] = {
+			 8000, 11025, 12000, 16000, 22050, 24000,
+			 32000, 44100, 48000, 88200, 96000
+};
+
+/* op clock divisions */
+static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 };
+
+/* lr clock frame size ratio */
+static int fs_ratios[] = {
+	64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536
+};
+
+/* bit clock divisors */
+static int bclk_divs[] = {
+	10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480,
+	640, 880, 960, 1280, 1760, 1920
+};
+
+static struct wm8994_priv g_wm8994_info;
+static unsigned char g_wm8994_i2c_dev_addr;
+
+/*
+ * Initialise I2C for wm 8994
+ *
+ * @param bus no	i2c bus number in which wm8994 is connected
+ */
+static void wm8994_i2c_init(int bus_no)
+{
+	i2c_set_bus_num(bus_no);
+}
+
+/*
+ * Writes value to a device register through i2c
+ *
+ * @param reg	reg number to be write
+ * @param data	data to be writen to the above registor
+ *
+ * @return	int value 1 for change, 0 for no change or negative error code.
+ */
+static int wm8994_i2c_write(unsigned int reg, unsigned short data)
+{
+	unsigned char val[2];
+
+	val[0] = (unsigned char)((data >> 8) & 0xff);
+	val[1] = (unsigned char)(data & 0xff);
+	debug("Write Addr : 0x%04X, Data :  0x%04X\n", reg, data);
+
+	return i2c_write(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+}
+
+/*
+ * Read a value from a device register through i2c
+ *
+ * @param reg	reg number to be read
+ * @param data	address of read data to be stored
+ *
+ * @return	int value 0 for success, -1 in case of error.
+ */
+static unsigned int  wm8994_i2c_read(unsigned int reg , unsigned short *data)
+{
+	unsigned char val[2];
+	int ret;
+
+	ret = i2c_read(g_wm8994_i2c_dev_addr, reg, 2, val, 2);
+	if (ret != 0) {
+		debug("%s: Error while reading register %#04x\n",
+		      __func__, reg);
+		return -1;
+	}
+
+	*data = val[0];
+	*data <<= 8;
+	*data |= val[1];
+
+	return 0;
+}
+
+/*
+ * update device register bits through i2c
+ *
+ * @param reg	codec register
+ * @param mask	register mask
+ * @param value	new value
+ *
+ * @return int value 1 if change in the register value,
+ * 0 for no change or negative error code.
+ */
+static int wm8994_update_bits(unsigned int reg, unsigned short mask,
+						unsigned short value)
+{
+	int change , ret = 0;
+	unsigned short old, new;
+
+	if (wm8994_i2c_read(reg, &old) != 0)
+		return -1;
+	new = (old & ~mask) | (value & mask);
+	change  = (old != new) ? 1 : 0;
+	if (change)
+		ret = wm8994_i2c_write(reg, new);
+	if (ret < 0)
+		return ret;
+
+	return change;
+}
+
+/*
+ * Sets i2s set format
+ *
+ * @param aif_id	Interface ID
+ * @param fmt		i2S format
+ *
+ * @return -1 for error and 0  Success.
+ */
+int wm8994_set_fmt(int aif_id, unsigned int fmt)
+{
+	int ms_reg;
+	int aif_reg;
+	int ms = 0;
+	int aif = 0;
+	int aif_clk = 0;
+	int error = 0;
+
+	switch (aif_id) {
+	case 1:
+		ms_reg = WM8994_AIF1_MASTER_SLAVE;
+		aif_reg = WM8994_AIF1_CONTROL_1;
+		aif_clk = WM8994_AIF1_CLOCKING_1;
+		break;
+	case 2:
+		ms_reg = WM8994_AIF2_MASTER_SLAVE;
+		aif_reg = WM8994_AIF2_CONTROL_1;
+		aif_clk = WM8994_AIF2_CLOCKING_1;
+		break;
+	default:
+		debug("%s: Invalid audio interface selection\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
+	case SND_SOC_DAIFMT_CBS_CFS:
+		break;
+	case SND_SOC_DAIFMT_CBM_CFM:
+		ms = WM8994_AIF1_MSTR;
+		break;
+	default:
+		debug("%s: Invalid i2s master selection\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_B:
+		aif |= WM8994_AIF1_LRCLK_INV;
+	case SND_SOC_DAIFMT_DSP_A:
+		aif |= 0x18;
+		break;
+	case SND_SOC_DAIFMT_I2S:
+		aif |= 0x10;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		aif |= 0x8;
+		break;
+	default:
+		debug("%s: Invalid i2s format selection\n", __func__);
+		return -1;
+	}
+
+	switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
+	case SND_SOC_DAIFMT_DSP_A:
+	case SND_SOC_DAIFMT_DSP_B:
+		/* frame inversion not valid for DSP modes */
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif |= WM8994_AIF1_BCLK_INV;
+			break;
+		default:
+			debug("%s: Invalid i2s frame inverse selection\n",
+			      __func__);
+			return -1;
+		}
+		break;
+
+	case SND_SOC_DAIFMT_I2S:
+	case SND_SOC_DAIFMT_RIGHT_J:
+	case SND_SOC_DAIFMT_LEFT_J:
+		switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
+		case SND_SOC_DAIFMT_NB_NF:
+			break;
+		case SND_SOC_DAIFMT_IB_IF:
+			aif |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_IB_NF:
+			aif |= WM8994_AIF1_BCLK_INV;
+			break;
+		case SND_SOC_DAIFMT_NB_IF:
+			aif |= WM8994_AIF1_LRCLK_INV;
+			break;
+		default:
+			debug("%s: Invalid i2s clock polarity selection\n",
+			      __func__);
+			return -1;
+		}
+		break;
+	default:
+		debug("%s: Invalid i2s format selection\n", __func__);
+		return -1;
+	}
+
+	error = wm8994_update_bits(aif_reg, WM8994_AIF1_BCLK_INV |
+			WM8994_AIF1_LRCLK_INV_MASK | WM8994_AIF1_FMT_MASK, aif);
+
+	error |= wm8994_update_bits(ms_reg, WM8994_AIF1_MSTR_MASK, ms);
+	error |= wm8994_update_bits(aif_clk, WM8994_AIF1CLK_ENA_MASK,
+						WM8994_AIF1CLK_ENA);
+	if (error < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Sets hw params FOR WM8994
+ *
+ * @param wm8994		wm8994 information pointer
+ * @param aif_id		Audio interface ID
+ * @param sampling_rate		Sampling rate
+ * @param bits_per_sample	Bits per sample
+ * @param Channels		Channels in the given audio input
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int wm8994_hw_params(struct wm8994_priv *wm8994, int aif_id,
+		unsigned int sampling_rate, unsigned int bits_per_sample,
+		unsigned int channels)
+{
+	int aif1_reg;
+	int aif2_reg;
+	int bclk_reg;
+	int bclk = 0;
+	int rate_reg;
+	int aif1 = 0;
+	int aif2 = 0;
+	int rate_val = 0;
+	int id = aif_id - 1;
+	int i, cur_val, best_val, bclk_rate, best;
+	unsigned short reg_data;
+	int ret = 0;
+
+	switch (aif_id) {
+	case 1:
+		aif1_reg = WM8994_AIF1_CONTROL_1;
+		aif2_reg = WM8994_AIF1_CONTROL_2;
+		bclk_reg = WM8994_AIF1_BCLK;
+		rate_reg = WM8994_AIF1_RATE;
+		break;
+	case 2:
+		aif1_reg = WM8994_AIF2_CONTROL_1;
+		aif2_reg = WM8994_AIF2_CONTROL_2;
+		bclk_reg = WM8994_AIF2_BCLK;
+		rate_reg = WM8994_AIF2_RATE;
+		break;
+	default:
+		return -1;
+	}
+
+	bclk_rate = sampling_rate * 32;
+	switch (bits_per_sample) {
+	case 16:
+		bclk_rate *= 16;
+		break;
+	case 20:
+		bclk_rate *= 20;
+		aif1 |= 0x20;
+		break;
+	case 24:
+		bclk_rate *= 24;
+		aif1 |= 0x40;
+		break;
+	case 32:
+		bclk_rate *= 32;
+		aif1 |= 0x60;
+		break;
+	default:
+		return -1;
+	}
+
+	/* Try to find an appropriate sample rate; look for an exact match. */
+	for (i = 0; i < ARRAY_SIZE(src_rate); i++)
+		if (src_rate[i] == sampling_rate)
+			break;
+
+	if (i == ARRAY_SIZE(src_rate)) {
+		debug("%s: Could not get the best matching samplingrate\n",
+		      __func__);
+		return -1;
+	}
+
+	rate_val |= i << WM8994_AIF1_SR_SHIFT;
+
+	/* AIFCLK/fs ratio; look for a close match in either direction */
+	best = 0;
+	best_val = abs((fs_ratios[0] * sampling_rate)
+						- wm8994->aifclk[id]);
+
+	for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) {
+		cur_val = abs((fs_ratios[i] * sampling_rate)
+					- wm8994->aifclk[id]);
+		if (cur_val >= best_val)
+			continue;
+		best = i;
+		best_val = cur_val;
+	}
+
+	rate_val |= best;
+
+	/*
+	 * We may not get quite the right frequency if using
+	 * approximate clocks so look for the closest match that is
+	 * higher than the target (we need to ensure that there enough
+	 * BCLKs to clock out the samples).
+	 */
+	best = 0;
+	for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
+		cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate;
+		if (cur_val < 0) /* BCLK table is sorted */
+			break;
+		best = i;
+	}
+
+	if (i ==  ARRAY_SIZE(bclk_divs)) {
+		debug("%s: Could not get the best matching bclk division\n",
+		      __func__);
+		return -1;
+	}
+
+	bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best];
+	bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT;
+
+	if (wm8994_i2c_read(aif1_reg, &reg_data) != 0) {
+		debug("%s: AIF1 register read Failed\n", __func__);
+		return -1;
+	}
+
+	if ((channels == 1) && ((reg_data & 0x18) == 0x18))
+		aif2 |= WM8994_AIF1_MONO;
+
+	if (wm8994->aifclk[id] == 0) {
+		debug("%s:Audio interface clock not set\n", __func__);
+		return -1;
+	}
+
+	ret = wm8994_update_bits(aif1_reg, WM8994_AIF1_WL_MASK, aif1);
+	ret |= wm8994_update_bits(aif2_reg, WM8994_AIF1_MONO, aif2);
+	ret |= wm8994_update_bits(bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk);
+	ret |= wm8994_update_bits(rate_reg, WM8994_AIF1_SR_MASK |
+				WM8994_AIF1CLK_RATE_MASK, rate_val);
+
+	debug("rate vale = %x , bclk val= %x\n", rate_val, bclk);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface Clock
+ *
+ * @param wm8994	wm8994 information pointer
+ * @param aif		Audio Interface ID
+ *
+ * @return -1 for error  and 0  Success.
+ */
+static int configure_aif_clock(struct wm8994_priv *wm8994, int aif)
+{
+	int rate;
+	int reg1 = 0;
+	int offset;
+	int ret;
+
+	/* AIF(1/0) register adress offset calculated */
+	if (aif)
+		offset = 4;
+	else
+		offset = 0;
+
+	switch (wm8994->sysclk[aif]) {
+	case WM8994_SYSCLK_MCLK1:
+		reg1 |= SEL_MCLK1;
+		rate = wm8994->mclk[0];
+		break;
+
+	case WM8994_SYSCLK_MCLK2:
+		reg1 |= SEL_MCLK2;
+		rate = wm8994->mclk[1];
+		break;
+
+	case WM8994_SYSCLK_FLL1:
+		reg1 |= SEL_FLL1;
+		rate = wm8994->fll[0].out;
+		break;
+
+	case WM8994_SYSCLK_FLL2:
+		reg1 |= SEL_FLL2;
+		rate = wm8994->fll[1].out;
+		break;
+
+	default:
+		debug("%s: Invalid input clock selection [%d]\n",
+		      __func__, wm8994->sysclk[aif]);
+		return -1;
+	}
+
+	/* if input clock frequenct is more than 135Mhz then divide */
+	if (rate >= WM8994_MAX_INPUT_CLK_FREQ) {
+		rate /= 2;
+		reg1 |= WM8994_AIF1CLK_DIV;
+	}
+
+	wm8994->aifclk[aif] = rate;
+
+	ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset,
+				WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV,
+				reg1);
+
+	ret |= wm8994_update_bits(WM8994_CLOCKING_1,
+			WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK |
+			WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC |
+			WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Configures Audio interface  for the given frequency
+ *
+ * @param wm8994	wm8994 information
+ * @param aif_id	Audio Interface
+ * @param clk_id	Input Clock ID
+ * @param freq		Sampling frequency in Hz
+ *
+ * @return -1 for error and 0 success.
+ */
+static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id,
+				int clk_id, unsigned int freq)
+{
+	int i;
+	int ret = 0;
+
+	wm8994->sysclk[aif_id - 1] = clk_id;
+
+	switch (clk_id) {
+	case WM8994_SYSCLK_MCLK1:
+		wm8994->mclk[0] = freq;
+		if (aif_id == 2) {
+			ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_2 ,
+			WM8994_AIF2DAC_DIV_MASK , 0);
+		}
+		break;
+
+	case WM8994_SYSCLK_MCLK2:
+		/* TODO: Set GPIO AF */
+		wm8994->mclk[1] = freq;
+		break;
+
+	case WM8994_SYSCLK_FLL1:
+	case WM8994_SYSCLK_FLL2:
+		break;
+
+	case WM8994_SYSCLK_OPCLK:
+		/*
+		 * Special case - a division (times 10) is given and
+		 * no effect on main clocking.
+		 */
+		if (freq) {
+			for (i = 0; i < ARRAY_SIZE(opclk_divs); i++)
+				if (opclk_divs[i] == freq)
+					break;
+			if (i == ARRAY_SIZE(opclk_divs)) {
+				debug("%s frequency divisor not found\n",
+					__func__);
+				return -1;
+			}
+			ret = wm8994_update_bits(WM8994_CLOCKING_2,
+					    WM8994_OPCLK_DIV_MASK, i);
+			ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+					    WM8994_OPCLK_ENA, WM8994_OPCLK_ENA);
+		} else {
+			ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2,
+					    WM8994_OPCLK_ENA, 0);
+		}
+
+	default:
+		debug("%s Invalid input clock selection [%d]\n",
+		      __func__, clk_id);
+		return -1;
+	}
+
+	ret |= configure_aif_clock(wm8994, aif_id - 1);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Initializes Volume for AIF2 to HP path
+ *
+ * @returns -1 for error  and 0 Success.
+ *
+ */
+static int wm8994_init_volume_aif2_dac1(void)
+{
+	int ret;
+
+	/* Unmute AIF2DAC */
+	ret = wm8994_update_bits(WM8994_AIF2_DAC_FILTERS_1,
+			WM8994_AIF2DAC_MUTE_MASK, 0);
+
+
+	ret |= wm8994_update_bits(WM8994_AIF2_DAC_LEFT_VOLUME,
+			WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACL_VOL_MASK,
+			WM8994_AIF2DAC_VU | 0xff);
+
+	ret |= wm8994_update_bits(WM8994_AIF2_DAC_RIGHT_VOLUME,
+			WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACR_VOL_MASK,
+			WM8994_AIF2DAC_VU | 0xff);
+
+
+	ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME,
+			WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK |
+			WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+
+	ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME,
+			WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK |
+			WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0);
+	/* Head Phone Volume */
+	ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D);
+	ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D);
+
+	if (ret < 0) {
+		debug("%s: codec register access error\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+/*
+ * Intialise wm8994 codec device
+ *
+ * @param wm8994	wm8994 information
+ *
+ * @returns -1 for error  and 0 Success.
+ */
+static int wm8994_device_init(struct wm8994_priv *wm8994)
+{
+	const char *devname;
+	unsigned short reg_data;
+	int ret;
+
+	wm8994_i2c_write(WM8994_SOFTWARE_RESET, WM8994_SW_RESET);/* Reset */
+
+	ret = wm8994_i2c_read(WM8994_SOFTWARE_RESET, &reg_data);
+	if (ret < 0) {
+		debug("Failed to read ID register\n");
+		goto err;
+	}
+
+	if (reg_data == WM8994_ID) {
+		devname = "WM8994";
+		debug("Device registered as type %d\n", wm8994->type);
+		wm8994->type = WM8994;
+	} else {
+		debug("Device is not a WM8994, ID is %x\n", ret);
+		ret = -1;
+		goto err;
+	}
+
+	ret = wm8994_i2c_read(WM8994_CHIP_REVISION, &reg_data);
+	if (ret < 0) {
+		debug("Failed to read revision register: %d\n", ret);
+		goto err;
+	}
+	wm8994->revision = reg_data;
+	debug("%s revision %c\n", devname, 'A' + wm8994->revision);
+
+	/* VMID Selection */
+	ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+			WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3);
+
+	/* Charge Pump Enable */
+	ret |= wm8994_update_bits(WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK,
+					WM8994_CP_ENA);
+
+	/* Head Phone Power Enable */
+	ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+			WM8994_HPOUT1L_ENA_MASK, WM8994_HPOUT1L_ENA);
+
+	ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1,
+				WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA);
+
+	/* Power enable for AIF2 and DAC1 */
+	ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5,
+		WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK |
+		WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK,
+		WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | WM8994_DAC1L_ENA |
+		WM8994_DAC1R_ENA);
+
+	/* Head Phone Initialisation */
+	ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+		WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK,
+		WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY);
+
+	ret |= wm8994_update_bits(WM8994_DC_SERVO_1,
+			WM8994_DCS_ENA_CHAN_0_MASK |
+			WM8994_DCS_ENA_CHAN_1_MASK , WM8994_DCS_ENA_CHAN_0 |
+			WM8994_DCS_ENA_CHAN_1);
+
+	ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1,
+			WM8994_HPOUT1L_DLY_MASK |
+			WM8994_HPOUT1R_DLY_MASK | WM8994_HPOUT1L_OUTP_MASK |
+			WM8994_HPOUT1R_OUTP_MASK |
+			WM8994_HPOUT1L_RMV_SHORT_MASK |
+			WM8994_HPOUT1R_RMV_SHORT_MASK, WM8994_HPOUT1L_DLY |
+			WM8994_HPOUT1R_DLY | WM8994_HPOUT1L_OUTP |
+			WM8994_HPOUT1R_OUTP | WM8994_HPOUT1L_RMV_SHORT |
+			WM8994_HPOUT1R_RMV_SHORT);
+
+	/* MIXER Config DAC1 to HP */
+	ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_1,
+			WM8994_DAC1L_TO_HPOUT1L_MASK, WM8994_DAC1L_TO_HPOUT1L);
+
+	ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2,
+			WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R);
+
+	/* Routing AIF2 to DAC1 */
+	ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING,
+			WM8994_AIF2DACL_TO_DAC1L_MASK,
+			WM8994_AIF2DACL_TO_DAC1L);
+
+	ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING,
+			WM8994_AIF2DACR_TO_DAC1R_MASK,
+			WM8994_AIF2DACR_TO_DAC1R);
+
+	 /* GPIO Settings for AIF2 */
+	 /* B CLK */
+	ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK |
+				WM8994_GPIO_FUNCTION_MASK ,
+				WM8994_GPIO_DIR_OUTPUT |
+				WM8994_GPIO_FUNCTION_I2S_CLK);
+
+	/* LR CLK */
+	ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK |
+				WM8994_GPIO_FUNCTION_MASK,
+				WM8994_GPIO_DIR_OUTPUT |
+				WM8994_GPIO_FUNCTION_I2S_CLK);
+
+	/* DATA */
+	ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK |
+				WM8994_GPIO_FUNCTION_MASK,
+				WM8994_GPIO_DIR_OUTPUT |
+				WM8994_GPIO_FUNCTION_I2S_CLK);
+
+	ret |= wm8994_init_volume_aif2_dac1();
+	if (ret < 0)
+		goto err;
+
+	debug("%s: Codec chip init ok\n", __func__);
+	return 0;
+err:
+	debug("%s: Codec chip init error\n", __func__);
+	return -1;
+}
+
+/*wm8994 Device Initialisation */
+int wm8994_init(struct sound_codec_info *pcodec_info,
+			enum en_audio_interface aif_id,
+			int sampling_rate, int mclk_freq,
+			int bits_per_sample, unsigned int channels)
+{
+	int ret = 0;
+
+	/* shift the device address by 1 for 7 bit addressing */
+	g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr;
+	wm8994_i2c_init(pcodec_info->i2c_bus);
+
+	if (pcodec_info->codec_type == CODEC_WM_8994)
+		g_wm8994_info.type = WM8994;
+	else {
+		debug("%s: Codec id [%d] not defined\n", __func__,
+				pcodec_info->codec_type);
+		return -1;
+	}
+
+	ret = wm8994_device_init(&g_wm8994_info);
+	if (ret < 0) {
+		debug("%s: wm8994 codec chip init failed\n", __func__);
+		return ret;
+	}
+
+	ret =  wm8994_set_sysclk(&g_wm8994_info, aif_id, WM8994_SYSCLK_MCLK1,
+							mclk_freq);
+	if (ret < 0) {
+		debug("%s: wm8994 codec set sys clock failed\n", __func__);
+		return ret;
+	}
+
+	ret = wm8994_hw_params(&g_wm8994_info, aif_id, sampling_rate,
+						bits_per_sample, channels);
+
+	if (ret == 0) {
+		ret = wm8994_set_fmt(aif_id, SND_SOC_DAIFMT_I2S |
+						SND_SOC_DAIFMT_NB_NF |
+						SND_SOC_DAIFMT_CBS_CFS);
+	}
+	return ret;
+}
diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h
new file mode 100644
index 0000000..a8f0de1
--- /dev/null
+++ b/drivers/sound/wm8994.h
@@ -0,0 +1,87 @@ 
+/*
+ * Copyright (C) 2012 Samsung Electronics
+ * R. Chadrasekar <rcsekar@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __WM8994_H__
+#define __WM8994_H__
+
+/* Sources for AIF1/2 SYSCLK - use with set_dai_sysclk() */
+#define WM8994_SYSCLK_MCLK1	1
+#define WM8994_SYSCLK_MCLK2	2
+#define WM8994_SYSCLK_FLL1	3
+#define WM8994_SYSCLK_FLL2	4
+
+/*  Avilable audi interface ports in wm8994 codec */
+enum en_audio_interface {
+	 WM8994_AIF1 = 1,
+	 WM8994_AIF2,
+	 WM8994_AIF3
+};
+
+/* OPCLK is also configured with set_dai_sysclk, specify division*10 as rate. */
+#define WM8994_SYSCLK_OPCLK	5
+
+#define WM8994_FLL1	1
+#define WM8994_FLL2	2
+
+#define WM8994_FLL_SRC_MCLK1	1
+#define WM8994_FLL_SRC_MCLK2	2
+#define WM8994_FLL_SRC_LRCLK	3
+#define WM8994_FLL_SRC_BCLK	4
+
+/* maximum available digital interfac in the dac to configure */
+#define WM8994_MAX_AIF			2
+
+#define WM8994_MAX_INPUT_CLK_FREQ	13500000
+#define WM8994_ID			0x8994
+
+enum wm8994_vmid_mode {
+	WM8994_VMID_NORMAL,
+	WM8994_VMID_FORCE,
+};
+
+/* wm 8994 family devices */
+enum wm8994_type {
+	WM8994 = 0,
+	WM8958 = 1,
+	WM1811 = 2,
+};
+
+/*
+ * intialise wm8994 sound codec device for the given configuration
+ *
+ * @param pcodec_info		pointer value of the sound codec info structure
+ *				parsed from device tree
+ * @param aif_id		enum value of codec interface port in which
+ *				soc i2s is connected
+ * @param sampling_rate		Sampling rate ranges between from 8khz to 96khz
+ * @param mclk_freq		Master clock frequency.
+ * @param bits_per_sample	bits per Sample can be 16 or 24
+ * @param channels		Number of channnels, maximum 2
+ *
+ * @returns -1 for error  and 0  Success.
+ */
+int wm8994_init(struct sound_codec_info *pcodec_info,
+			enum en_audio_interface aif_id,
+			int sampling_rate, int mclk_freq,
+			int bits_per_sample, unsigned int channels);
+#endif /*__WM8994_H__ */
diff --git a/drivers/sound/wm8994_registers.h b/drivers/sound/wm8994_registers.h
new file mode 100644
index 0000000..f455b11
--- /dev/null
+++ b/drivers/sound/wm8994_registers.h
@@ -0,0 +1,299 @@ 
+/*
+ * (C) Copyright 2012 Samsung Electronics
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#ifndef __WM8994_REGISTERS_H__
+#define __WM8994_REGISTERS_H__
+
+/*
+ * Register values.
+ */
+#define WM8994_SOFTWARE_RESET                   0x00
+#define WM8994_POWER_MANAGEMENT_1               0x01
+#define WM8994_POWER_MANAGEMENT_2               0x02
+#define WM8994_POWER_MANAGEMENT_5               0x05
+#define WM8994_LEFT_OUTPUT_VOLUME               0x1C
+#define WM8994_RIGHT_OUTPUT_VOLUME              0x1D
+#define WM8994_OUTPUT_MIXER_1                   0x2D
+#define WM8994_OUTPUT_MIXER_2                   0x2E
+#define WM8994_CHARGE_PUMP_1                    0x4C
+#define WM8994_DC_SERVO_1                       0x54
+#define WM8994_ANALOGUE_HP_1                    0x60
+#define WM8994_CHIP_REVISION                    0x100
+#define WM8994_AIF1_CLOCKING_1                  0x200
+#define WM8994_AIF1_CLOCKING_2                  0x201
+#define WM8994_AIF2_CLOCKING_1                  0x204
+#define WM8994_CLOCKING_1                       0x208
+#define WM8994_CLOCKING_2                       0x209
+#define WM8994_AIF1_RATE                        0x210
+#define WM8994_AIF2_RATE                        0x211
+#define WM8994_RATE_STATUS                      0x212
+#define WM8994_AIF1_CONTROL_1                   0x300
+#define WM8994_AIF1_CONTROL_2                   0x301
+#define WM8994_AIF1_MASTER_SLAVE                0x302
+#define WM8994_AIF1_BCLK                        0x303
+#define WM8994_AIF2_CONTROL_1                   0x310
+#define WM8994_AIF2_CONTROL_2                   0x311
+#define WM8994_AIF2_MASTER_SLAVE                0x312
+#define WM8994_AIF2_BCLK                        0x313
+#define WM8994_AIF2_DAC_LEFT_VOLUME             0x502
+#define WM8994_AIF2_DAC_RIGHT_VOLUME            0x503
+#define WM8994_AIF2_DAC_FILTERS_1               0x520
+#define WM8994_DAC1_LEFT_MIXER_ROUTING          0x601
+#define WM8994_DAC1_RIGHT_MIXER_ROUTING         0x602
+#define WM8994_DAC1_LEFT_VOLUME                 0x610
+#define WM8994_DAC1_RIGHT_VOLUME                0x611
+#define WM8994_GPIO_3                           0x702
+#define WM8994_GPIO_4                           0x703
+#define WM8994_GPIO_5                           0x704
+
+/*
+ * Field Definitions.
+ */
+
+/*
+ * R0 (0x00) - Software Reset
+ */
+/* SW_RESET */
+#define WM8994_SW_RESET                              1
+/*
+ * R1 (0x01) - Power Management (1)
+ */
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA                      0x0200
+/* HPOUT1L_ENA */
+#define WM8994_HPOUT1L_ENA_MASK                 0x0200
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA                      0x0100
+/* HPOUT1R_ENA */
+#define WM8994_HPOUT1R_ENA_MASK                 0x0100
+/* VMID_SEL - [2:1] */
+#define WM8994_VMID_SEL_MASK                    0x0006
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA                         0x0001
+/* BIAS_ENA */
+#define WM8994_BIAS_ENA_MASK                    0x0001
+
+/*
+ * R2 (0x02) - Power Management (2)
+ */
+/* OPCLK_ENA */
+#define WM8994_OPCLK_ENA                        0x0800
+
+/*
+ * R5 (0x05) - Power Management (5)
+ */
+/* AIF2DACL_ENA */
+#define WM8994_AIF2DACL_ENA                     0x2000
+#define WM8994_AIF2DACL_ENA_MASK                0x2000
+/* AIF2DACR_ENA */
+#define WM8994_AIF2DACR_ENA                     0x1000
+#define WM8994_AIF2DACR_ENA_MASK                0x1000
+/* DAC1L_ENA */
+#define WM8994_DAC1L_ENA                        0x0002
+#define WM8994_DAC1L_ENA_MASK                   0x0002
+/* DAC1R_ENA */
+#define WM8994_DAC1R_ENA                        0x0001
+#define WM8994_DAC1R_ENA_MASK                   0x0001
+
+/*
+ * R45 (0x2D) - Output Mixer (1)
+ */
+/* DAC1L_TO_HPOUT1L */
+#define WM8994_DAC1L_TO_HPOUT1L                 0x0100
+#define WM8994_DAC1L_TO_HPOUT1L_MASK            0x0100
+
+/*
+ * R46 (0x2E) - Output Mixer (2)
+ */
+/* DAC1R_TO_HPOUT1R */
+#define WM8994_DAC1R_TO_HPOUT1R                 0x0100
+#define WM8994_DAC1R_TO_HPOUT1R_MASK            0x0100
+
+/*
+ * R76 (0x4C) - Charge Pump (1)
+ */
+/* CP_ENA */
+#define WM8994_CP_ENA                           0x8000
+#define WM8994_CP_ENA_MASK                      0x8000
+/*
+ * R84 (0x54) - DC Servo (1)
+ */
+/* DCS_ENA_CHAN_1 */
+#define WM8994_DCS_ENA_CHAN_1                   0x0002
+#define WM8994_DCS_ENA_CHAN_1_MASK              0x0002
+/* DCS_ENA_CHAN_0 */
+#define WM8994_DCS_ENA_CHAN_0                   0x0001
+#define WM8994_DCS_ENA_CHAN_0_MASK              0x0001
+
+/*
+ * R96 (0x60) - Analogue HP (1)
+ */
+/* HPOUT1L_RMV_SHORT */
+#define WM8994_HPOUT1L_RMV_SHORT                0x0080
+#define WM8994_HPOUT1L_RMV_SHORT_MASK           0x0080
+/* HPOUT1L_OUTP */
+#define WM8994_HPOUT1L_OUTP                     0x0040
+#define WM8994_HPOUT1L_OUTP_MASK                0x0040
+/* HPOUT1L_DLY */
+#define WM8994_HPOUT1L_DLY                      0x0020
+#define WM8994_HPOUT1L_DLY_MASK                 0x0020
+/* HPOUT1R_RMV_SHORT */
+#define WM8994_HPOUT1R_RMV_SHORT                0x0008
+#define WM8994_HPOUT1R_RMV_SHORT_MASK           0x0008
+/* HPOUT1R_OUTP */
+#define WM8994_HPOUT1R_OUTP                     0x0004
+#define WM8994_HPOUT1R_OUTP_MASK                0x0004
+/* HPOUT1R_DLY */
+#define WM8994_HPOUT1R_DLY                      0x0002
+#define WM8994_HPOUT1R_DLY_MASK                 0x0002
+
+/*
+ * R512 (0x200) - AIF1 Clocking (1)
+ */
+/* AIF1CLK_SRC - [4:3] */
+#define WM8994_AIF1CLK_SRC_MASK                 0x0018
+/* AIF1CLK_DIV */
+#define WM8994_AIF1CLK_DIV                      0x0002
+/* AIF1CLK_ENA */
+#define WM8994_AIF1CLK_ENA                      0x0001
+#define WM8994_AIF1CLK_ENA_MASK                 0x0001
+
+/*
+ * R517 (0x205) - AIF2 Clocking (2)
+ */
+/* AIF2DAC_DIV - [5:3] */
+#define WM8994_AIF2DAC_DIV_MASK                 0x0038
+
+/*
+ * R520 (0x208) - Clocking (1)
+ */
+/* AIF2DSPCLK_ENA */
+#define WM8994_AIF2DSPCLK_ENA                   0x0004
+#define WM8994_AIF2DSPCLK_ENA_MASK              0x0004
+/* SYSDSPCLK_ENA */
+#define WM8994_SYSDSPCLK_ENA                    0x0002
+#define WM8994_SYSDSPCLK_ENA_MASK               0x0002
+/* SYSCLK_SRC */
+#define WM8994_SYSCLK_SRC                       0x0001
+
+/*
+ * R521 (0x209) - Clocking (2)
+ */
+/* OPCLK_DIV - [2:0] */
+#define WM8994_OPCLK_DIV_MASK                   0x0007
+
+/*
+ * R528 (0x210) - AIF1 Rate
+ */
+/* AIF1_SR - [7:4] */
+#define WM8994_AIF1_SR_MASK                     0x00F0
+#define WM8994_AIF1_SR_SHIFT                         4
+/* AIF1CLK_RATE - [3:0] */
+#define WM8994_AIF1CLK_RATE_MASK                0x000F
+
+/*
+ * R768 (0x300) - AIF1 Control (1)
+ */
+/* AIF1_BCLK_INV */
+#define WM8994_AIF1_BCLK_INV                    0x0100
+/* AIF1_LRCLK_INV */
+#define WM8994_AIF1_LRCLK_INV                   0x0080
+#define WM8994_AIF1_LRCLK_INV_MASK              0x0080
+/* AIF1_WL - [6:5] */
+#define WM8994_AIF1_WL_MASK                     0x0060
+/* AIF1_FMT - [4:3] */
+#define WM8994_AIF1_FMT_MASK                    0x0018
+
+/*
+ * R769 (0x301) - AIF1 Control (2)
+ */
+/* AIF1_MONO */
+#define WM8994_AIF1_MONO                        0x0100
+
+/*
+ * R770 (0x302) - AIF1 Master/Slave
+ */
+/* AIF1_MSTR */
+#define WM8994_AIF1_MSTR                        0x4000
+#define WM8994_AIF1_MSTR_MASK                   0x4000
+
+/*
+ * R771 (0x303) - AIF1 BCLK
+ */
+/* AIF1_BCLK_DIV - [8:4] */
+#define WM8994_AIF1_BCLK_DIV_MASK               0x01F0
+#define WM8994_AIF1_BCLK_DIV_SHIFT                   4
+
+/*
+ * R1282 (0x502) - AIF2 DAC Left Volume
+ */
+/* AIF2DAC_VU */
+#define WM8994_AIF2DAC_VU                       0x0100
+#define WM8994_AIF2DAC_VU_MASK                  0x0100
+/* AIF2DACL_VOL - [7:0] */
+#define WM8994_AIF2DACL_VOL_MASK                0x00FF
+
+/*
+ * R1283 (0x503) - AIF2 DAC Right Volume
+ */
+/* AIF2DACR_VOL - [7:0] */
+#define WM8994_AIF2DACR_VOL_MASK                0x00FF
+
+/*
+ * R1312 (0x520) - AIF2 DAC Filters (1)
+ */
+/* AIF2DAC_MUTE */
+#define WM8994_AIF2DAC_MUTE_MASK                0x0200
+
+/*
+ * R1537 (0x601) - DAC1 Left Mixer Routing
+ */
+/* AIF2DACL_TO_DAC1L */
+#define WM8994_AIF2DACL_TO_DAC1L                0x0004
+#define WM8994_AIF2DACL_TO_DAC1L_MASK           0x0004
+
+/*
+ * R1538 (0x602) - DAC1 Right Mixer Routing
+ */
+/* AIF2DACR_TO_DAC1R */
+#define WM8994_AIF2DACR_TO_DAC1R                0x0004
+#define WM8994_AIF2DACR_TO_DAC1R_MASK           0x0004
+
+/*
+ * R1552 (0x610) - DAC1 Left Volume
+ */
+/* DAC1L_MUTE */
+#define WM8994_DAC1L_MUTE_MASK                  0x0200
+/* DAC1_VU */
+#define WM8994_DAC1_VU                          0x0100
+#define WM8994_DAC1_VU_MASK                     0x0100
+/* DAC1L_VOL - [7:0] */
+#define WM8994_DAC1L_VOL_MASK                   0x00FF
+
+/*
+ * R1553 (0x611) - DAC1 Right Volume
+ */
+/* DAC1R_MUTE */
+#define WM8994_DAC1R_MUTE_MASK                  0x0200
+/* DAC1R_VOL - [7:0] */
+#define WM8994_DAC1R_VOL_MASK                   0x00FF
+
+/*
+ *  GPIO
+ */
+/* OUTPUT PIN */
+#define WM8994_GPIO_DIR_OUTPUT                   0x8000
+/* GPIO PIN MASK */
+#define WM8994_GPIO_DIR_MASK                     0xFFE0
+/* I2S CLK */
+#define WM8994_GPIO_FUNCTION_I2S_CLK             0x0000
+/* GPn FN */
+#define WM8994_GPIO_FUNCTION_MASK                0x001F
+#endif