@@ -742,21 +742,19 @@ static int suspend_set_state(struct regulator_dev *rdev,
* only warn if the driver implements set_suspend_voltage or
* set_suspend_mode callback.
*/
- if (!rstate->enabled && !rstate->disabled) {
+ if (rstate->enabled != ENABLE_IN_SUSPEND &&
+ rstate->enabled != DISABLE_IN_SUSPEND) {
if (rdev->desc->ops->set_suspend_voltage ||
rdev->desc->ops->set_suspend_mode)
rdev_warn(rdev, "No configuration\n");
return 0;
}
- if (rstate->enabled && rstate->disabled) {
- rdev_err(rdev, "invalid configuration\n");
- return -EINVAL;
- }
-
- if (rstate->enabled && rdev->desc->ops->set_suspend_enable)
+ if (rstate->enabled == ENABLE_IN_SUSPEND &&
+ rdev->desc->ops->set_suspend_enable)
ret = rdev->desc->ops->set_suspend_enable(rdev);
- else if (rstate->disabled && rdev->desc->ops->set_suspend_disable)
+ else if (rstate->enabled == DISABLE_IN_SUSPEND &&
+ rdev->desc->ops->set_suspend_disable)
ret = rdev->desc->ops->set_suspend_disable(rdev);
else /* OK if set_suspend_enable or set_suspend_disable is NULL */
ret = 0;
@@ -177,10 +177,12 @@ static void of_get_regulation_constraints(struct device_node *np,
if (of_property_read_bool(suspend_np,
"regulator-on-in-suspend"))
- suspend_state->enabled = true;
+ suspend_state->enabled = ENABLE_IN_SUSPEND;
else if (of_property_read_bool(suspend_np,
"regulator-off-in-suspend"))
- suspend_state->disabled = true;
+ suspend_state->enabled = DISABLE_IN_SUSPEND;
+ else
+ suspend_state->enabled = DO_NOTHING_IN_SUSPEND;
if (!of_property_read_u32(suspend_np,
"regulator-suspend-microvolt", &pval))
@@ -42,6 +42,16 @@ struct regulator;
#define REGULATOR_CHANGE_DRMS 0x10
#define REGULATOR_CHANGE_BYPASS 0x20
+/*
+ * operations in suspend mode
+ * DO_NOTHING_IN_SUSPEND - the default value
+ * DISABLE_IN_SUSPEND - turn off regulator in suspend states
+ * ENABLE_IN_SUSPEND - keep regulator on in suspend states
+ */
+#define DO_NOTHING_IN_SUSPEND (-1)
+#define DISABLE_IN_SUSPEND 0
+#define ENABLE_IN_SUSPEND 1
+
/* Regulator active discharge flags */
enum regulator_active_discharge {
REGULATOR_ACTIVE_DISCHARGE_DEFAULT,
@@ -58,14 +68,15 @@ enum regulator_active_discharge {
*
* @uV: Operating voltage during suspend.
* @mode: Operating mode during suspend.
- * @enabled: Enabled during suspend.
- * @disabled: Disabled during suspend.
+ * @enabled: operations during suspend.
+ * - DO_NOTHING_IN_SUSPEND
+ * - DISABLE_IN_SUSPEND
+ * - ENABLE_IN_SUSPEND
*/
struct regulator_state {
int uV; /* suspend voltage */
unsigned int mode; /* suspend regulator operating mode */
- int enabled; /* is regulator enabled in this suspend state */
- int disabled; /* is the regulator disabled in this suspend state */
+ int enabled;
};
/**
The items "disabled" and "enabled" are a little redundant, since only one of them would be set to record if the regulator device should keep on or be switched to off in suspend states. So in this patch, the "disabled" was removed, only leave the "enabled": - enabled == 1 for regulator-on-in-suspend - enabled == 0 for regulator-off-in-suspend - enabled == -1 means do nothing when entering suspend mode. Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org> --- drivers/regulator/core.c | 14 ++++++-------- drivers/regulator/of_regulator.c | 6 ++++-- include/linux/regulator/machine.h | 19 +++++++++++++++---- 3 files changed, 25 insertions(+), 14 deletions(-) -- 2.7.4