diff mbox series

[v2,4/5] dmaengine: qcom: bam_dma: do not write to global regs in remote mode

Message ID 20180214144459.29813-5-srinivas.kandagatla@linaro.org
State Superseded
Headers show
Series dmaengine: qcom: bam_dma: fixes for remotely controlled bam | expand

Commit Message

Srinivas Kandagatla Feb. 14, 2018, 2:44 p.m. UTC
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>


BAM_DESC_CNT_TRSHLD register is global register, which can only be written
when BAM is in master mode, So check the mode of operation before writing
it.

Without this check SOC's xPU would catch such access and crash the system.
First noticed on DB820c while testing SLIMBus BAM.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>

---
 drivers/dma/qcom/bam_dma.c | 13 ++++++++-----
 1 file changed, 8 insertions(+), 5 deletions(-)

-- 
2.15.1
diff mbox series

Patch

diff --git a/drivers/dma/qcom/bam_dma.c b/drivers/dma/qcom/bam_dma.c
index 146b5d03256f..88ec515ad125 100644
--- a/drivers/dma/qcom/bam_dma.c
+++ b/drivers/dma/qcom/bam_dma.c
@@ -935,12 +935,15 @@  static void bam_apply_new_config(struct bam_chan *bchan,
 	struct bam_device *bdev = bchan->bdev;
 	u32 maxburst;
 
-	if (dir == DMA_DEV_TO_MEM)
-		maxburst = bchan->slave.src_maxburst;
-	else
-		maxburst = bchan->slave.dst_maxburst;
+	if (!bdev->controlled_remotely) {
+		if (dir == DMA_DEV_TO_MEM)
+			maxburst = bchan->slave.src_maxburst;
+		else
+			maxburst = bchan->slave.dst_maxburst;
 
-	writel_relaxed(maxburst, bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
+		writel_relaxed(maxburst,
+			       bam_addr(bdev, 0, BAM_DESC_CNT_TRSHLD));
+	}
 
 	bchan->reconfigure = 0;
 }