| Message ID | 1352985288-29518-2-git-send-email-lee.jones@linaro.org |
|---|---|
| State | Accepted |
| Commit | 8ad49c65f551c15af3f1049d10ccbdcd376a295d |
| Headers | show |
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index d8ba489..9f55363 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -638,8 +638,6 @@ regulator-name = "mmci-reg"; regulator-type = "voltage"; - gpios = <&tc3589x_gpio 18 0x4>; - gpio-enable = <&tc3589x_gpio 17 0x4>; states = <1800000 0x1 2900000 0x0>; diff --git a/arch/arm/boot/dts/hrefprev60.dts b/arch/arm/boot/dts/hrefprev60.dts index b398946..eec29c4 100644 --- a/arch/arm/boot/dts/hrefprev60.dts +++ b/arch/arm/boot/dts/hrefprev60.dts @@ -37,5 +37,12 @@ reset-gpio = <&tc3589x_gpio 13 0x4>; }; }; + + vmmci: regulator-gpio { + gpios = <&tc3589x_gpio 18 0x4>; + gpio-enable = <&tc3589x_gpio 17 0x4>; + + status = "okay"; + }; }; };
GPIO numbers for the newly created gpio-regulator will differ from board to board. Therefore it's not sensible to leave this information in the top level DTSI file. Let's move them out to the DTS files where they can correctly vary. Signed-off-by: Lee Jones <lee.jones@linaro.org> --- arch/arm/boot/dts/dbx5x0.dtsi | 2 -- arch/arm/boot/dts/hrefprev60.dts | 7 +++++++ 2 files changed, 7 insertions(+), 2 deletions(-)