diff mbox series

dbus-test_1.12.2: various fixes

Message ID 20180301162442.32506-1-ross.burton@intel.com
State New
Headers show
Series dbus-test_1.12.2: various fixes | expand

Commit Message

Ross Burton March 1, 2018, 4:24 p.m. UTC
From: Juro Bystricky <juro.bystricky@intel.com>


The result of running dbus-test-ptest was a series of
various segfaults, interpreted as FAILs. This was a direct consequence
of the test suite loading the installed shared library libdbus-1.so, not the
one built along the test suite.

While we normally want to test against the installed libraries, we cannot
do this in this case as the test suite expects a library that is configured/compiled
differently from the installed one. We could configure the installed library
identically as the test suite expects, (and there should be no issues), however
this is not desirable for performance reasons.

Hence we need to use the library built along with the test suite.
Of course, running the test suite against its own library does not
test the installed library, however they are both built from the same
sources so that can give us some kind of indication.

The following changes were made:

1. Configure the test library as close as possible to the installed one,
   with some additional configuration options that are needed for testing.
   (Use dbus_1.12.2.bb recipe as a template)
2. Include the shared libraries in the package, use LD_LIBRARY_PATH during
   testing to load them instead of the installed ones.
3. Add a few more tests. (There are still some additional tests built that
   are not used, but they would have to be special-cased).
4. When evaluating the test results, differentiate between "FAIL" and "SKIP"

[YOCTO #10841]
[YOCTO #12277]

(From OE-Core rev: 5d148aa9c3c338fabab1e60e2ca64d09c9b8477f)

Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>

Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>

Signed-off-by: Ross Burton <ross.burton@intel.com>

---
 meta/recipes-core/dbus/dbus-test_1.12.2.bb | 32 ++++++++++++++++++++++++++----
 meta/recipes-core/dbus/dbus/run-ptest      | 20 ++++++++++++++++---
 2 files changed, 45 insertions(+), 7 deletions(-)

-- 
2.11.0

-- 
_______________________________________________
Openembedded-core mailing list
Openembedded-core@lists.openembedded.org
http://lists.openembedded.org/mailman/listinfo/openembedded-core
diff mbox series

Patch

diff --git a/meta/recipes-core/dbus/dbus-test_1.12.2.bb b/meta/recipes-core/dbus/dbus-test_1.12.2.bb
index c3891a33701..26556ed2468 100644
--- a/meta/recipes-core/dbus/dbus-test_1.12.2.bb
+++ b/meta/recipes-core/dbus/dbus-test_1.12.2.bb
@@ -34,25 +34,49 @@  EXTRA_OECONF = "--enable-tests \
                 --enable-checks \
                 --enable-asserts \
                 --enable-verbose-mode \
+                --enable-largefile \
                 --disable-xml-docs \
                 --disable-doxygen-docs \
                 --disable-libaudit \
-                --disable-systemd \
-                --without-systemdsystemunitdir \
                 --with-dbus-test-dir=${PTEST_PATH} \
                 ${EXTRA_OECONF_X}"
 
+EXTRA_OECONF_append_class-target = " SYSTEMCTL=${base_bindir}/systemctl"
+
+PACKAGECONFIG ??= "${@bb.utils.filter('DISTRO_FEATURES', 'systemd x11', d)}"
+PACKAGECONFIG_class-native = ""
+PACKAGECONFIG_class-nativesdk = ""
+
+PACKAGECONFIG[systemd] = "--enable-systemd --with-systemdsystemunitdir=${systemd_system_unitdir},--disable-systemd --without-systemdsystemunitdir,systemd"
+PACKAGECONFIG[x11] = "--with-x --enable-x11-autolaunch,--without-x --disable-x11-autolaunch, virtual/libx11 libsm"
+PACKAGECONFIG[user-session] = "--enable-user-session --with-systemduserunitdir=${systemd_user_unitdir},--disable-user-session"
+
 do_install() {
     :
 }
 
 do_install_ptest() {
 	install -d ${D}${PTEST_PATH}/test
-	l="shell printf refs syslog marshal syntax corrupt dbus-daemon dbus-daemon-eavesdrop loopback relay"
+	l="shell printf refs syslog marshal syntax corrupt dbus-daemon dbus-daemon-eavesdrop loopback relay \
+	   variant uid-permissions syntax spawn sd-activation names monitor message fdpass "
 	for i in $l; do install ${B}/test/.libs/test-$i ${D}${PTEST_PATH}/test; done
+
 	l="bus bus-system bus-launch-helper"
 	for i in $l; do install ${B}/bus/.libs/test-$i ${D}${PTEST_PATH}/test; done
-	install ${B}/dbus/.libs/test-dbus ${D}${PTEST_PATH}/test
+
 	cp -r ${B}/test/data ${D}${PTEST_PATH}/test
+	install ${B}/dbus/.libs/test-dbus ${D}${PTEST_PATH}/test
+
+	install -d ${D}${PTEST_PATH}/test/.libs
+	cp -a ${B}/dbus/.libs/*.so* ${D}${PTEST_PATH}/test/.libs
+
+	# Remove build host references...
+	find "${D}${PTEST_PATH}/test/data" \( -name *.service -o -name *.conf \) -type f -exec \
+		sed -i \
+		 -e 's:${B}:${PTEST_PATH}:g' \
+		 {} +
 }
+
 RDEPENDS_${PN}-ptest += "bash"
+
+PRIVATE_LIBS_${PN}-ptest = "libdbus-1.so.3"
diff --git a/meta/recipes-core/dbus/dbus/run-ptest b/meta/recipes-core/dbus/dbus/run-ptest
index c72d083a917..8a8970ee208 100755
--- a/meta/recipes-core/dbus/dbus/run-ptest
+++ b/meta/recipes-core/dbus/dbus/run-ptest
@@ -1,10 +1,24 @@ 
 #!/bin/sh
 
 output() {
-  if [ $? -eq 0 ]
+  retcode=$?
+  if [ $retcode -eq 0 ]
     then echo "PASS: $i"
-    else echo "FAIL: $i"
+  elif [ $retcode -eq 77 ]
+    then echo "SKIP: $i"
+  else echo "FAIL: $i"
   fi
 }
 
-for i in `ls test/test-*`; do ./$i ./test/data DBUS_TEST_HOMEDIR=./test >/dev/null; output; done
+export DBUS_TEST_HOMEDIR=./test
+export XDG_RUNTIME_DIR=./test
+export LD_LIBRARY_PATH=/usr/lib/dbus-test/ptest/test/.libs
+
+files=`ls test/test-*`
+
+for i in $files
+	do
+		./$i ./test/data >/dev/null
+		output
+	done
+