@@ -27,9 +27,11 @@
*/
#include <common.h>
+#include <fdtdec.h>
#ifdef CONFIG_EXYNOS5
#include <asm/arch/clk.h>
#include <asm/arch/cpu.h>
+#include <asm/arch/pinmux.h>
#else
#include <asm/arch/s3c24x0_cpu.h>
#endif
@@ -60,7 +62,14 @@
#define I2C_TIMEOUT 1 /* 1 second */
-static unsigned int g_current_bus; /* Stores Current I2C Bus */
+/*
+ * For SPL boot some boards need i2c before SDRAM is initialised so force
+ * variables to live in SRAM
+ */
+static unsigned int g_current_bus __attribute__((section(".data")));
+static struct s3c24x0_i2c_bus i2c_bus[CONFIG_MAX_I2C_NUM]
+ __attribute__((section(".data")));
+static int i2c_busses __attribute__((section(".data")));
#ifndef CONFIG_EXYNOS5
static int GetI2CSDA(void)
@@ -507,4 +516,76 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
(i2c, I2C_WRITE, chip << 1, &xaddr[4 - alen], alen, buffer,
len) != 0);
}
+
+#ifdef CONFIG_OF_CONTROL
+void board_i2c_init(const void *blob)
+{
+
+ int node_list[CONFIG_MAX_I2C_NUM];
+ int count, i;
+
+ count = fdtdec_find_aliases_for_id(blob, "i2c",
+ COMPAT_SAMSUNG_S3C2440_I2C, node_list,
+ CONFIG_MAX_I2C_NUM);
+ for (i = 0; i < count; i++) {
+ struct s3c24x0_i2c_bus *bus;
+ int node = node_list[i];
+
+ if (node < 0)
+ continue;
+ bus = &i2c_bus[i];
+ bus->regs = (struct s3c24x0_i2c *)
+ fdtdec_get_addr(blob, node, "reg");
+ bus->id = decode_periph_id(blob, node);
+ bus->node = node;
+ bus->bus_num = i2c_busses++;
+ exynos_pinmux_config(bus->id, 0);
+ }
+
+}
+
+static struct s3c24x0_i2c_bus *get_bus(unsigned int bus_idx)
+{
+ if (bus_idx < i2c_busses)
+ return &i2c_bus[bus_idx];
+ debug("Undefined bus: %d\n", bus_idx);
+ return NULL;
+}
+
+int i2c_get_bus_num_fdt(int node)
+{
+ int i;
+
+ for (i = 0; i < i2c_busses; i++) {
+ if (node == i2c_bus[i].node)
+ return i;
+ }
+
+ debug("%s: Can't find any matched I2C bus\n", __func__);
+ return -1;
+}
+
+int i2c_reset_port_fdt(const void *blob, int node)
+{
+ struct s3c24x0_i2c_bus *i2c;
+
+ int bus;
+
+ bus = i2c_get_bus_num_fdt(node);
+ if (bus < 0) {
+ debug("could not get bus for node %d\n", node);
+ return -1;
+ }
+ i2c = get_bus(bus);
+ if (!i2c) {
+ debug("get_bus() failed for node node %d\n", node);
+ return -1;
+ }
+
+ i2c_ch_init(i2c->regs, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+
+ return 0;
+}
+#endif
+
#endif /* CONFIG_HARD_I2C */
@@ -30,4 +30,12 @@ struct s3c24x0_i2c {
u32 iicds;
u32 iiclc;
};
+
+struct s3c24x0_i2c_bus {
+ int node; /* device tree node */
+ int bus_num; /* i2c bus number */
+ struct s3c24x0_i2c *regs;
+ enum periph_id id;
+};
+
#endif /* _S3C24X0_I2C_H */
@@ -262,4 +262,30 @@ extern int get_multi_scl_pin(void);
extern int get_multi_sda_pin(void);
extern int multi_i2c_init(void);
#endif
+
+/**
+ * Get FDT values for i2c bus.
+ *
+ * @param blob Device tree blbo
+ * @return the number of I2C bus
+ */
+void board_i2c_init(const void *blob);
+
+/**
+ * Find the I2C bus number by given a FDT I2C node.
+ *
+ * @param blob Device tree blbo
+ * @param node FDT I2C node to find
+ * @return the number of I2C bus (zero based), or -1 on error
+ */
+int i2c_get_bus_num_fdt(int node);
+
+/**
+ * Reset the I2C bus represented by the given a FDT I2C node.
+ *
+ * @param blob Device tree blbo
+ * @param node FDT I2C node to find
+ * @return 0 if port was reset, -1 if not found
+ */
+int i2c_reset_port_fdt(const void *blob, int node);
#endif /* _I2C_H_ */
Functions added to get the I2C bus number and reset I2C bus using FDT node. Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com> --- Changes in V2: - Added periph id to I2C bus structure. - Modified i2c_get_bus_num_fdt function to compare with node. - Board i2c init moved to driver in case of FDT. Chnages in V3: - peripheral id decoded based on interrupts. - removed compat id check in i2c_get_bus_num_fdt. drivers/i2c/s3c24x0_i2c.c | 83 ++++++++++++++++++++++++++++++++++++++++++++- drivers/i2c/s3c24x0_i2c.h | 8 ++++ include/i2c.h | 26 ++++++++++++++ 3 files changed, 116 insertions(+), 1 deletions(-)