deleted file mode 100644
@@ -1,210 +0,0 @@
-/*
- * CPU frequency scaling for u8500
- * Inspired by linux/arch/arm/mach-davinci/cpufreq.c
- *
- * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License Terms: GNU General Public License v2
- *
- * Author: Sundar Iyer <sundar.iyer@stericsson.com>
- * Author: Martin Persson <martin.persson@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/kernel.h>
-#include <linux/cpufreq.h>
-#include <linux/delay.h>
-#include <linux/mfd/db8500-prcmu.h>
-
-#include <mach/hardware.h>
-
-#define DRIVER_NAME "cpufreq-u8500"
-#define CPUFREQ_NAME "u8500"
-
-static struct device *dev;
-
-static struct cpufreq_frequency_table freq_table[] = {
- [0] = {
- .index = 0,
- .frequency = 200000,
- },
- [1] = {
- .index = 1,
- .frequency = 300000,
- },
- [2] = {
- .index = 2,
- .frequency = 600000,
- },
- [3] = {
- /* Used for CPU_OPP_MAX, if available */
- .index = 3,
- .frequency = CPUFREQ_TABLE_END,
- },
- [4] = {
- .index = 4,
- .frequency = CPUFREQ_TABLE_END,
- },
-};
-
-static enum prcmu_cpu_opp index2opp[] = {
- CPU_OPP_EXT_CLK,
- CPU_OPP_50,
- CPU_OPP_100,
- CPU_OPP_MAX
-};
-
-static int u8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
-{
- return cpufreq_frequency_table_verify(policy, freq_table);
-}
-
-static int u8500_cpufreq_target(struct cpufreq_policy *policy,
- unsigned int target_freq,
- unsigned int relation)
-{
- struct cpufreq_freqs freqs;
- unsigned int index;
- int ret = 0;
-
- /*
- * Ensure desired rate is within allowed range. Some govenors
- * (ondemand) will just pass target_freq=0 to get the minimum.
- */
- if (target_freq < policy->cpuinfo.min_freq)
- target_freq = policy->cpuinfo.min_freq;
- if (target_freq > policy->cpuinfo.max_freq)
- target_freq = policy->cpuinfo.max_freq;
-
- ret = cpufreq_frequency_table_target(policy, freq_table,
- target_freq, relation, &index);
- if (ret < 0) {
- dev_err(dev, "Could not look up next frequency\n");
- return ret;
- }
-
- freqs.old = policy->cur;
- freqs.new = freq_table[index].frequency;
- freqs.cpu = policy->cpu;
-
- if (freqs.old == freqs.new) {
- dev_dbg(dev, "Current and target frequencies are equal\n");
- return 0;
- }
-
- dev_dbg(dev, "transition: %u --> %u\n", freqs.old, freqs.new);
- cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
-
- ret = prcmu_set_cpu_opp(index2opp[index]);
- if (ret < 0) {
- dev_err(dev, "Failed to set OPP level\n");
- return ret;
- }
-
- cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
-
- return ret;
-}
-
-static unsigned int u8500_cpufreq_getspeed(unsigned int cpu)
-{
- int i;
-
- for (i = 0; prcmu_get_cpu_opp() != index2opp[i]; i++)
- ;
- return freq_table[i].frequency;
-}
-
-static int __cpuinit u8500_cpu_init(struct cpufreq_policy *policy)
-{
- int res;
-
- BUILD_BUG_ON(ARRAY_SIZE(index2opp) + 1 != ARRAY_SIZE(freq_table));
-
- if (cpu_is_u8500v2()) {
- freq_table[1].frequency = 400000;
- freq_table[2].frequency = 800000;
- if (prcmu_has_arm_maxopp())
- freq_table[3].frequency = 1000000;
- }
-
- /* get policy fields based on the table */
- res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
- if (!res)
- cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
- else {
- dev_err(dev, "u8500-cpufreq : Failed to read policy table\n");
- return res;
- }
-
- policy->min = policy->cpuinfo.min_freq;
- policy->max = policy->cpuinfo.max_freq;
- policy->cur = u8500_cpufreq_getspeed(policy->cpu);
- policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
-
- /*
- * FIXME : Need to take time measurement across the target()
- * function with no/some/all drivers in the notification
- * list.
- */
- policy->cpuinfo.transition_latency = 200 * 1000; /* in ns */
-
- /* policy sharing between dual CPUs */
- cpumask_copy(policy->cpus, &cpu_present_map);
-
- policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
-
- return res;
-}
-
-static struct freq_attr *u8500_cpufreq_attr[] = {
- &cpufreq_freq_attr_scaling_available_freqs,
- NULL,
-};
-static int u8500_cpu_exit(struct cpufreq_policy *policy)
-{
- cpufreq_frequency_table_put_attr(policy->cpu);
- return 0;
-}
-
-static struct cpufreq_driver u8500_driver = {
- .owner = THIS_MODULE,
- .flags = CPUFREQ_STICKY,
- .verify = u8500_cpufreq_verify_speed,
- .target = u8500_cpufreq_target,
- .get = u8500_cpufreq_getspeed,
- .init = u8500_cpu_init,
- .exit = u8500_cpu_exit,
- .name = CPUFREQ_NAME,
- .attr = u8500_cpufreq_attr,
-};
-
-static int __init u8500_cpufreq_probe(struct platform_device *pdev)
-{
- dev = &pdev->dev;
- return cpufreq_register_driver(&u8500_driver);
-}
-
-static int __exit u8500_cpufreq_remove(struct platform_device *pdev)
-{
- return cpufreq_unregister_driver(&u8500_driver);
-}
-
-static struct platform_driver u8500_cpufreq_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .owner = THIS_MODULE,
- },
- .remove = __exit_p(u8500_cpufreq_remove),
-};
-
-static int __init u8500_cpufreq_init(void)
-{
- return platform_driver_probe(&u8500_cpufreq_driver,
- &u8500_cpufreq_probe);
-}
-
-device_initcall(u8500_cpufreq_init);
@@ -13,3 +13,4 @@ obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
# CPUfreq cross-arch helpers
obj-$(CONFIG_CPU_FREQ_TABLE) += freq_table.o
+obj-$(CONFIG_UX500_SOC_DB8500) += db8500-cpufreq.o
new file mode 100644
@@ -0,0 +1,169 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Sundar Iyer <sundar.iyer@stericsson.com>
+ * Author: Martin Persson <martin.persson@stericsson.com>
+ * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/mfd/db8500-prcmu.h>
+#include <mach/id.h>
+
+static struct cpufreq_frequency_table freq_table[] = {
+ [0] = {
+ .index = 0,
+ .frequency = 300000,
+ },
+ [1] = {
+ .index = 1,
+ .frequency = 600000,
+ },
+ [2] = {
+ /* Used for MAX_OPP, if available */
+ .index = 2,
+ .frequency = CPUFREQ_TABLE_END,
+ },
+ [3] = {
+ .index = 3,
+ .frequency = CPUFREQ_TABLE_END,
+ },
+};
+
+static enum arm_opp idx2opp[] = {
+ ARM_50_OPP,
+ ARM_100_OPP,
+ ARM_MAX_OPP
+};
+
+static struct freq_attr *db8500_cpufreq_attr[] = {
+ &cpufreq_freq_attr_scaling_available_freqs,
+ NULL,
+};
+
+static int db8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
+{
+ return cpufreq_frequency_table_verify(policy, freq_table);
+}
+
+static int db8500_cpufreq_target(struct cpufreq_policy *policy,
+ unsigned int target_freq,
+ unsigned int relation)
+{
+ struct cpufreq_freqs freqs;
+ unsigned int idx;
+
+ /* scale the target frequency to one of the extremes supported */
+ if (target_freq < policy->cpuinfo.min_freq)
+ target_freq = policy->cpuinfo.min_freq;
+ if (target_freq > policy->cpuinfo.max_freq)
+ target_freq = policy->cpuinfo.max_freq;
+
+ /* Lookup the next frequency */
+ if (cpufreq_frequency_table_target
+ (policy, freq_table, target_freq, relation, &idx)) {
+ return -EINVAL;
+ }
+
+ freqs.old = policy->cur;
+ freqs.new = freq_table[idx].frequency;
+ freqs.cpu = policy->cpu;
+
+ if (freqs.old == freqs.new)
+ return 0;
+
+ /* pre-change notification */
+ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+ /* request the PRCM unit for opp change */
+ if (prcmu_set_arm_opp(idx2opp[idx])) {
+ pr_err("db8500-cpufreq: Failed to set OPP level\n");
+ return -EINVAL;
+ }
+
+ /* post change notification */
+ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+ return 0;
+}
+
+static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
+{
+ int i;
+ /* request the prcm to get the current ARM opp */
+ for (i = 0; prcmu_get_arm_opp() != idx2opp[i]; i++)
+ ;
+ return freq_table[i].frequency;
+}
+
+static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
+{
+ int res;
+ int i;
+
+ BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
+
+ if (cpu_is_u8500v2() && !prcmu_is_u8400()) {
+ freq_table[0].frequency = 400000;
+ freq_table[1].frequency = 800000;
+ if (prcmu_has_arm_maxopp())
+ freq_table[2].frequency = 1000000;
+ }
+
+ /* get policy fields based on the table */
+ res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+ if (!res)
+ cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
+ else {
+ pr_err("db8500-cpufreq : Failed to read policy table\n");
+ return res;
+ }
+
+ policy->min = policy->cpuinfo.min_freq;
+ policy->max = policy->cpuinfo.max_freq;
+ policy->cur = db8500_cpufreq_getspeed(policy->cpu);
+
+ for (i = 0; freq_table[i].frequency != policy->cur; i++)
+ ;
+
+ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
+ /*
+ * FIXME : Need to take time measurement across the target()
+ * function with no/some/all drivers in the notification
+ * list.
+ */
+ policy->cpuinfo.transition_latency = 20 * 1000; /* in ns */
+
+ /* policy sharing between dual CPUs */
+ cpumask_copy(policy->cpus, &cpu_present_map);
+
+ policy->shared_type = CPUFREQ_SHARED_TYPE_ALL;
+
+ return 0;
+}
+
+static struct cpufreq_driver db8500_cpufreq_driver = {
+ .flags = CPUFREQ_STICKY,
+ .verify = db8500_cpufreq_verify_speed,
+ .target = db8500_cpufreq_target,
+ .get = db8500_cpufreq_getspeed,
+ .init = db8500_cpufreq_init,
+ .name = "DB8500",
+ .attr = db8500_cpufreq_attr,
+};
+
+static int __init db8500_cpufreq_register(void)
+{
+ if (cpu_is_u8500v1() || ux500_is_svp())
+ return -ENODEV;
+
+ pr_info("cpufreq for DB8500 started\n");
+ return cpufreq_register_driver(&db8500_cpufreq_driver);
+}
+device_initcall(db8500_cpufreq_register);