@@ -31,7 +31,6 @@ extern void dn_sched_init(irq_handler_t handler);
extern void dn_init_IRQ(void);
extern u32 dn_gettimeoffset(void);
extern int dn_dummy_hwclk(int, struct rtc_time *);
-extern int dn_dummy_set_clock_mmss(unsigned long);
extern void dn_dummy_reset(void);
#ifdef CONFIG_HEARTBEAT
static void dn_heartbeat(int on);
@@ -156,7 +155,6 @@ void __init config_apollo(void)
arch_gettimeoffset = dn_gettimeoffset;
mach_max_dma_address = 0xffffffff;
mach_hwclk = dn_dummy_hwclk; /* */
- mach_set_clock_mmss = dn_dummy_set_clock_mmss; /* */
mach_reset = dn_dummy_reset; /* */
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = dn_heartbeat;
@@ -240,12 +238,6 @@ int dn_dummy_hwclk(int op, struct rtc_time *t) {
}
-int dn_dummy_set_clock_mmss(unsigned long nowtime)
-{
- pr_info("set_clock_mmss\n");
- return 0;
-}
-
void dn_dummy_reset(void) {
dn_serial_print("The end !\n");
@@ -81,9 +81,6 @@ extern void atari_sched_init(irq_handler_t);
extern u32 atari_gettimeoffset(void);
extern int atari_mste_hwclk (int, struct rtc_time *);
extern int atari_tt_hwclk (int, struct rtc_time *);
-extern int atari_mste_set_clock_mmss (unsigned long);
-extern int atari_tt_set_clock_mmss (unsigned long);
-
/* ++roman: This is a more elaborate test for an SCC chip, since the plain
* Medusa board generates DTACK at the SCC's standard addresses, but a SCC
@@ -362,13 +359,11 @@ void __init config_atari(void)
ATARIHW_SET(TT_CLK);
pr_cont(" TT_CLK");
mach_hwclk = atari_tt_hwclk;
- mach_set_clock_mmss = atari_tt_set_clock_mmss;
}
if (hwreg_present(&mste_rtc.sec_ones)) {
ATARIHW_SET(MSTE_CLK);
pr_cont(" MSTE_CLK");
mach_hwclk = atari_mste_hwclk;
- mach_set_clock_mmss = atari_mste_set_clock_mmss;
}
if (!MACH_IS_MEDUSA && hwreg_present(&dma_wd.fdc_speed) &&
hwreg_write(&dma_wd.fdc_speed, 0)) {
@@ -285,69 +285,6 @@ int atari_tt_hwclk( int op, struct rtc_time *t )
return( 0 );
}
-
-int atari_mste_set_clock_mmss (unsigned long nowtime)
-{
- short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
- struct MSTE_RTC val;
- unsigned char rtc_minutes;
-
- mste_read(&val);
- rtc_minutes= val.min_ones + val.min_tens * 10;
- if ((rtc_minutes < real_minutes
- ? real_minutes - rtc_minutes
- : rtc_minutes - real_minutes) < 30)
- {
- val.sec_ones = real_seconds % 10;
- val.sec_tens = real_seconds / 10;
- val.min_ones = real_minutes % 10;
- val.min_tens = real_minutes / 10;
- mste_write(&val);
- }
- else
- return -1;
- return 0;
-}
-
-int atari_tt_set_clock_mmss (unsigned long nowtime)
-{
- int retval = 0;
- short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
- unsigned char save_control, save_freq_select, rtc_minutes;
-
- save_control = RTC_READ (RTC_CONTROL); /* tell the clock it's being set */
- RTC_WRITE (RTC_CONTROL, save_control | RTC_SET);
-
- save_freq_select = RTC_READ (RTC_FREQ_SELECT); /* stop and reset prescaler */
- RTC_WRITE (RTC_FREQ_SELECT, save_freq_select | RTC_DIV_RESET2);
-
- rtc_minutes = RTC_READ (RTC_MINUTES);
- if (!(save_control & RTC_DM_BINARY))
- rtc_minutes = bcd2bin(rtc_minutes);
-
- /* Since we're only adjusting minutes and seconds, don't interfere
- with hour overflow. This avoids messing with unknown time zones
- but requires your RTC not to be off by more than 30 minutes. */
- if ((rtc_minutes < real_minutes
- ? real_minutes - rtc_minutes
- : rtc_minutes - real_minutes) < 30)
- {
- if (!(save_control & RTC_DM_BINARY))
- {
- real_seconds = bin2bcd(real_seconds);
- real_minutes = bin2bcd(real_minutes);
- }
- RTC_WRITE (RTC_SECONDS, real_seconds);
- RTC_WRITE (RTC_MINUTES, real_minutes);
- }
- else
- retval = -1;
-
- RTC_WRITE (RTC_FREQ_SELECT, save_freq_select);
- RTC_WRITE (RTC_CONTROL, save_control);
- return retval;
-}
-
/*
* Local variables:
* c-indent-level: 4
@@ -41,7 +41,6 @@ static void bvme6000_get_model(char *model);
extern void bvme6000_sched_init(irq_handler_t handler);
extern u32 bvme6000_gettimeoffset(void);
extern int bvme6000_hwclk (int, struct rtc_time *);
-extern int bvme6000_set_clock_mmss (unsigned long);
extern void bvme6000_reset (void);
void bvme6000_set_vectors (void);
@@ -113,7 +112,6 @@ void __init config_bvme6000(void)
mach_init_IRQ = bvme6000_init_IRQ;
arch_gettimeoffset = bvme6000_gettimeoffset;
mach_hwclk = bvme6000_hwclk;
- mach_set_clock_mmss = bvme6000_set_clock_mmss;
mach_reset = bvme6000_reset;
mach_get_model = bvme6000_get_model;
@@ -305,46 +303,3 @@ int bvme6000_hwclk(int op, struct rtc_time *t)
return 0;
}
-
-/*
- * Set the minutes and seconds from seconds value 'nowtime'. Fail if
- * clock is out by > 30 minutes. Logic lifted from atari code.
- * Algorithm is to wait for the 10ms register to change, and then to
- * wait a short while, and then set it.
- */
-
-int bvme6000_set_clock_mmss (unsigned long nowtime)
-{
- int retval = 0;
- short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
- unsigned char rtc_minutes, rtc_tenms;
- volatile RtcPtr_t rtc = (RtcPtr_t)BVME_RTC_BASE;
- unsigned char msr = rtc->msr & 0xc0;
- unsigned long flags;
- volatile int i;
-
- rtc->msr = 0; /* Ensure clock accessible */
- rtc_minutes = bcd2bin (rtc->bcd_min);
-
- if ((rtc_minutes < real_minutes
- ? real_minutes - rtc_minutes
- : rtc_minutes - real_minutes) < 30)
- {
- local_irq_save(flags);
- rtc_tenms = rtc->bcd_tenms;
- while (rtc_tenms == rtc->bcd_tenms)
- ;
- for (i = 0; i < 1000; i++)
- ;
- rtc->bcd_min = bin2bcd(real_minutes);
- rtc->bcd_sec = bin2bcd(real_seconds);
- local_irq_restore(flags);
- }
- else
- retval = -1;
-
- rtc->msr = msr;
-
- return retval;
-}
-
@@ -22,7 +22,6 @@ extern int (*mach_hwclk)(int, struct rtc_time*);
extern unsigned int (*mach_get_ss)(void);
extern int (*mach_get_rtc_pll)(struct rtc_pll_info *);
extern int (*mach_set_rtc_pll)(struct rtc_pll_info *);
-extern int (*mach_set_clock_mmss)(unsigned long);
extern void (*mach_reset)( void );
extern void (*mach_halt)( void );
extern void (*mach_power_off)( void );
@@ -88,7 +88,6 @@ void (*mach_get_hardware_list) (struct seq_file *m);
/* machine dependent timer functions */
int (*mach_hwclk) (int, struct rtc_time*);
EXPORT_SYMBOL(mach_hwclk);
-int (*mach_set_clock_mmss) (unsigned long);
unsigned int (*mach_get_ss)(void);
int (*mach_get_rtc_pll)(struct rtc_pll_info *);
int (*mach_set_rtc_pll)(struct rtc_pll_info *);
@@ -51,7 +51,6 @@ char __initdata command_line[COMMAND_LINE_SIZE];
/* machine dependent timer functions */
void (*mach_sched_init)(irq_handler_t handler) __initdata = NULL;
-int (*mach_set_clock_mmss)(unsigned long);
int (*mach_hwclk) (int, struct rtc_time*);
/* machine dependent reboot functions */
@@ -57,7 +57,6 @@ static unsigned long mac_orig_videoaddr;
/* Mac specific timer functions */
extern u32 mac_gettimeoffset(void);
extern int mac_hwclk(int, struct rtc_time *);
-extern int mac_set_clock_mmss(unsigned long);
extern void iop_preinit(void);
extern void iop_init(void);
extern void via_init(void);
@@ -158,7 +157,6 @@ void __init config_mac(void)
mach_get_model = mac_get_model;
arch_gettimeoffset = mac_gettimeoffset;
mach_hwclk = mac_hwclk;
- mach_set_clock_mmss = mac_set_clock_mmss;
mach_reset = mac_reset;
mach_halt = mac_poweroff;
mach_power_off = mac_poweroff;
@@ -735,19 +735,3 @@ int mac_hwclk(int op, struct rtc_time *t)
}
return 0;
}
-
-/*
- * Set minutes/seconds in the hardware clock
- */
-
-int mac_set_clock_mmss (unsigned long nowtime)
-{
- struct rtc_time now;
-
- mac_hwclk(0, &now);
- now.tm_sec = nowtime % 60;
- now.tm_min = (nowtime / 60) % 60;
- mac_hwclk(1, &now);
-
- return 0;
-}
@@ -40,7 +40,6 @@ static void mvme147_get_model(char *model);
extern void mvme147_sched_init(irq_handler_t handler);
extern u32 mvme147_gettimeoffset(void);
extern int mvme147_hwclk (int, struct rtc_time *);
-extern int mvme147_set_clock_mmss (unsigned long);
extern void mvme147_reset (void);
@@ -92,7 +91,6 @@ void __init config_mvme147(void)
mach_init_IRQ = mvme147_init_IRQ;
arch_gettimeoffset = mvme147_gettimeoffset;
mach_hwclk = mvme147_hwclk;
- mach_set_clock_mmss = mvme147_set_clock_mmss;
mach_reset = mvme147_reset;
mach_get_model = mvme147_get_model;
@@ -164,8 +162,3 @@ int mvme147_hwclk(int op, struct rtc_time *t)
}
return 0;
}
-
-int mvme147_set_clock_mmss (unsigned long nowtime)
-{
- return 0;
-}
@@ -46,7 +46,6 @@ static void mvme16x_get_model(char *model);
extern void mvme16x_sched_init(irq_handler_t handler);
extern u32 mvme16x_gettimeoffset(void);
extern int mvme16x_hwclk (int, struct rtc_time *);
-extern int mvme16x_set_clock_mmss (unsigned long);
extern void mvme16x_reset (void);
int bcd2int (unsigned char b);
@@ -280,7 +279,6 @@ void __init config_mvme16x(void)
mach_init_IRQ = mvme16x_init_IRQ;
arch_gettimeoffset = mvme16x_gettimeoffset;
mach_hwclk = mvme16x_hwclk;
- mach_set_clock_mmss = mvme16x_set_clock_mmss;
mach_reset = mvme16x_reset;
mach_get_model = mvme16x_get_model;
mach_get_hardware_list = mvme16x_get_hardware_list;
@@ -411,9 +409,3 @@ int mvme16x_hwclk(int op, struct rtc_time *t)
}
return 0;
}
-
-int mvme16x_set_clock_mmss (unsigned long nowtime)
-{
- return 0;
-}
-
@@ -43,7 +43,6 @@ extern void q40_sched_init(irq_handler_t handler);
static u32 q40_gettimeoffset(void);
static int q40_hwclk(int, struct rtc_time *);
static unsigned int q40_get_ss(void);
-static int q40_set_clock_mmss(unsigned long);
static int q40_get_rtc_pll(struct rtc_pll_info *pll);
static int q40_set_rtc_pll(struct rtc_pll_info *pll);
@@ -175,7 +174,6 @@ void __init config_q40(void)
mach_get_ss = q40_get_ss;
mach_get_rtc_pll = q40_get_rtc_pll;
mach_set_rtc_pll = q40_set_rtc_pll;
- mach_set_clock_mmss = q40_set_clock_mmss;
mach_reset = q40_reset;
mach_get_model = q40_get_model;
@@ -267,34 +265,6 @@ static unsigned int q40_get_ss(void)
return bcd2bin(Q40_RTC_SECS);
}
-/*
- * Set the minutes and seconds from seconds value 'nowtime'. Fail if
- * clock is out by > 30 minutes. Logic lifted from atari code.
- */
-
-static int q40_set_clock_mmss(unsigned long nowtime)
-{
- int retval = 0;
- short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
- int rtc_minutes;
-
- rtc_minutes = bcd2bin(Q40_RTC_MINS);
-
- if ((rtc_minutes < real_minutes ?
- real_minutes - rtc_minutes :
- rtc_minutes - real_minutes) < 30) {
- Q40_RTC_CTRL |= Q40_RTC_WRITE;
- Q40_RTC_MINS = bin2bcd(real_minutes);
- Q40_RTC_SECS = bin2bcd(real_seconds);
- Q40_RTC_CTRL &= ~(Q40_RTC_WRITE);
- } else
- retval = -1;
-
- return retval;
-}
-
-
/* get and set PLL calibration of RTC clock */
#define Q40_RTC_PLL_MASK ((1<<5)-1)
#define Q40_RTC_PLL_SIGN (1<<5)
Commit 397ac99c6cef ("m68k: remove dead timer code") removed set_rtc_mmss() because it was unused in 2012. However, this was itself the only user of the mach_set_clock_mmss() callback and the many implementations of that callback, which are equally unused. This removes all of those as well. Acked-by: Greg Ungerer <gerg@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- v2: no changes --- arch/m68k/apollo/config.c | 8 ------ arch/m68k/atari/config.c | 5 ---- arch/m68k/atari/time.c | 63 ----------------------------------------- arch/m68k/bvme6000/config.c | 45 ----------------------------- arch/m68k/include/asm/machdep.h | 1 - arch/m68k/kernel/setup_mm.c | 1 - arch/m68k/kernel/setup_no.c | 1 - arch/m68k/mac/config.c | 2 -- arch/m68k/mac/misc.c | 16 ----------- arch/m68k/mvme147/config.c | 7 ----- arch/m68k/mvme16x/config.c | 8 ------ arch/m68k/q40/config.c | 30 -------------------- 12 files changed, 187 deletions(-) -- 2.9.0