diff mbox series

[net-next,3/5] net: gemini: Allow multiple ports to instantiate

Message ID 20180630161806.24312-3-linus.walleij@linaro.org
State Superseded
Headers show
Series [net-next,1/5] net: gemini: Look up L3 maxlen from table | expand

Commit Message

Linus Walleij June 30, 2018, 4:18 p.m. UTC
The code was not tested with two ports actually in use at
the same time. (I blame this on lack of actual hardware using
that feature.) Now after locating a system using both ports,
add necessary fix to make both ports come up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/net/ethernet/cortina/gemini.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/net/ethernet/cortina/gemini.c b/drivers/net/ethernet/cortina/gemini.c
index b49ed8964026..8d192fcd51c8 100644
--- a/drivers/net/ethernet/cortina/gemini.c
+++ b/drivers/net/ethernet/cortina/gemini.c
@@ -1787,7 +1787,10 @@  static int gmac_open(struct net_device *netdev)
 	phy_start(netdev->phydev);
 
 	err = geth_resize_freeq(port);
-	if (err) {
+	/* It's fine if it's just busy, the other port has set up
+	 * the freeq in that case.
+	 */
+	if (err && (err != -EBUSY)) {
 		netdev_err(netdev, "could not resize freeq\n");
 		goto err_stop_phy;
 	}