Message ID | 1358768638-14187-8-git-send-email-amarendra.xt@samsung.com |
---|---|
State | New |
Headers | show |
Hi Amar, On Tue, Jan 22, 2013 at 12:43 AM, Amar <amarendra.xt@samsung.com> wrote: > This patch adds APIs to access(open / close) and to resize boot partiton of EMMC. > > Signed-off-by: Amar <amarendra.xt@samsung.com> > --- > Changes since V1: > New patch. > > Changes since V2: > 1)Updation of commit message and resubmition of proper patch set. > > Changes since V3: > No change. > > Changes since V4: > 1)Replaced the functions mmc_boot_open() & mmc_boot_close() with a > single function mmc_boot_part_access(). > > drivers/mmc/mmc.c | 117 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ > include/mmc.h | 24 +++++++++++ > 2 files changed, 141 insertions(+) > > diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c > index 72e8ce6..c152934 100644 > --- a/drivers/mmc/mmc.c > +++ b/drivers/mmc/mmc.c > @@ -1327,3 +1327,120 @@ int mmc_initialize(bd_t *bis) > > return 0; > } > + > +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, > + unsigned long rpmbsize) > +{ > + int err; > + struct mmc_cmd cmd; > + > + /* Only use this command for raw EMMC moviNAND */ > + /* Enter backdoor mode */ Should probably join these two comments. > + cmd.cmdidx = MMC_CMD_RES_MAN; > + cmd.resp_type = MMC_RSP_R1b; > + cmd.cmdarg = MMC_CMD62_ARG1; > + > + err = mmc_send_cmd(mmc, &cmd, NULL); > + if (err) { > + debug("mmc_boot_partition_size_change: Error1 = %d\n", err); > + return err; > + } > + > + /* Boot partition changing mode */ > + cmd.cmdidx = MMC_CMD_RES_MAN; > + cmd.resp_type = MMC_RSP_R1b; > + cmd.cmdarg = MMC_CMD62_ARG2; > + > + err = mmc_send_cmd(mmc, &cmd, NULL); > + if (err) { > + debug("mmc_boot_partition_size_change: Error2 = %d\n", err); > + return err; > + } > + /* boot partition size is multiple of 128KB */ > + bootsize = ((bootsize*1024)/128); space around * and / plus remove outer () > + > + /* Arg: boot partition size */ > + cmd.cmdidx = MMC_CMD_RES_MAN; > + cmd.resp_type = MMC_RSP_R1b; > + cmd.cmdarg = bootsize; > + > + err = mmc_send_cmd(mmc, &cmd, NULL); > + if (err) { > + debug("mmc_boot_partition_size_change: Error3 = %d\n", err); > + return err; > + } > + /* RPMB partition size is multiple of 128KB */ > + rpmbsize = ((rpmbsize*1024)/128); and here > + /* Arg: RPMB partition size */ > + cmd.cmdidx = MMC_CMD_RES_MAN; > + cmd.resp_type = MMC_RSP_R1b; > + cmd.cmdarg = rpmbsize; > + > + err = mmc_send_cmd(mmc, &cmd, NULL); > + if (err) { > + debug("mmc_boot_partition_size_change: Error4 = %d\n", err); > + return err; > + } > + return 0; > +} > + > +/* This function shall form and send the commands to open / close the /* * This function... > + * boot partition specified by user. > + * > + * ack: 0x0 - No boot acknowledge sent (default) > + * 0x1 - Boot acknowledge sent during boot operation > + * part_num: User selects boot data that will be sent to master > + * 0x0 - Device not boot enabled (default) > + * 0x1 - Boot partition 1 enabled for boot > + * 0x2 - Boot partition 2 enabled for boot > + * access: User selects partitions to access > + * 0x0 : No access to boot partition (default) > + * 0x1 : R/W boot partition 1 > + * 0x2 : R/W boot partition 2 > + * 0x3 : R/W Replay Protected Memory Block (RPMB) > + */ > +int mmc_boot_part_access(struct mmc *mmc, u32 ack, u32 part_num, u32 access) > +{ > + int err; > + struct mmc_cmd cmd; > + > + /* Boot ack enable, boot partition enable , boot partition access */ > + cmd.cmdidx = MMC_CMD_SWITCH; > + cmd.resp_type = MMC_RSP_R1b; > + > + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24 | > + EXT_CSD_PART_CONF << 16 | > + (EXT_CSD_BOOT_ACK(ack) | > + EXT_CSD_BOOT_PART_NUM(part_num) | > + EXT_CSD_PARTITION_ACCESS(access)) << 8); You can remove outer (). Might be nice to put () around the << sub-expressions: cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | (EXT_CSD_PART_CONF << 16) | > + > + err = mmc_send_cmd(mmc, &cmd, NULL); > + if (err) { > + if (access) { > + debug("mmc boot partition#%d open failure:" > + "Error1 = %d\n", part_num, err); > + } else { > + debug("mmc boot partition#%d close failure:" > + "Error = %d\n", part_num, err); > + } > + return err; > + } > + > + if (access) { > + /* 4bit transfer mode at booting time. */ > + cmd.cmdidx = MMC_CMD_SWITCH; > + cmd.resp_type = MMC_RSP_R1b; > + > + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24| Same here. Also space before |, and below > + EXT_CSD_BOOT_BUS_WIDTH << 16| > + ((1<<0) << 8)); > + > + err = mmc_send_cmd(mmc, &cmd, NULL); > + if (err) { > + debug("mmc boot partition#%d open failure:" > + "Error2 = %d\n", part_num, err); > + return err; > + } > + } > + return 0; > +} > diff --git a/include/mmc.h b/include/mmc.h > index a13e2bd..fcd9c54 100644 > --- a/include/mmc.h > +++ b/include/mmc.h > @@ -86,6 +86,11 @@ > #define MMC_CMD_APP_CMD 55 > #define MMC_CMD_SPI_READ_OCR 58 > #define MMC_CMD_SPI_CRC_ON_OFF 59 > +#define MMC_CMD_RES_MAN 62 > + > +#define MMC_CMD62_ARG1 0xefac62ec > +#define MMC_CMD62_ARG2 0xcbaea7 > + > > #define SD_CMD_SEND_RELATIVE_ADDR 3 > #define SD_CMD_SWITCH_FUNC 6 > @@ -153,6 +158,7 @@ > */ > #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ > #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ > +#define EXT_CSD_BOOT_BUS_WIDTH 177 > #define EXT_CSD_PART_CONF 179 /* R/W */ > #define EXT_CSD_BUS_WIDTH 183 /* R/W */ > #define EXT_CSD_HS_TIMING 185 /* R/W */ > @@ -177,6 +183,16 @@ > #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ > #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ > > +#define EXT_CSD_BOOT_ACK_ENABLE (1<<6) > +#define EXT_CSD_BOOT_PARTITION_ENABLE (1<<3) > +#define EXT_CSD_PARTITION_ACCESS_ENABLE (1<<0) > +#define EXT_CSD_PARTITION_ACCESS_DISABLE (0<<0) > + > +#define EXT_CSD_BOOT_ACK(x) (x<<6) > +#define EXT_CSD_BOOT_PART_NUM(x) (x<<3) > +#define EXT_CSD_PARTITION_ACCESS(x) (x<<0) > + > + > #define R1_ILLEGAL_COMMAND (1 << 22) > #define R1_APP_CMD (1 << 5) > > @@ -201,6 +217,11 @@ > #define PART_ACCESS_MASK (0x7) > #define PART_SUPPORT (0x1) > > +/* The number of MMC physical partitions. These consist of: > + * boot partitions (2), general purpose partitions (4) in MMC v4.4. > + */ > +#define MMC_NUM_BOOT_PARTITION 2 > + > struct mmc_cid { > unsigned long psn; > unsigned short oid; > @@ -275,6 +296,9 @@ int board_mmc_getcd(struct mmc *mmc); > int mmc_switch_part(int dev_num, unsigned int part_num); > int mmc_getcd(struct mmc *mmc); > void spl_mmc_load(void) __noreturn; Could you please add full comments for these functions? > +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, > + unsigned long rpmbsize); > +int mmc_boot_part_access(struct mmc *mmc, u32 ack, u32 part_num, u32 access); > > #ifdef CONFIG_GENERIC_MMC > #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) > -- > 1.8.0 > Regards, Simon
Hi Simon, Please find the responses below. Thanks & Regards Amarendra Reddy On 27 January 2013 01:55, Simon Glass <sjg@chromium.org> wrote: > Hi Amar, > > On Tue, Jan 22, 2013 at 12:43 AM, Amar <amarendra.xt@samsung.com> wrote: > > This patch adds APIs to access(open / close) and to resize boot partiton > of EMMC. > > > > Signed-off-by: Amar <amarendra.xt@samsung.com> > > --- > > Changes since V1: > > New patch. > > > > Changes since V2: > > 1)Updation of commit message and resubmition of proper patch set. > > > > Changes since V3: > > No change. > > > > Changes since V4: > > 1)Replaced the functions mmc_boot_open() & mmc_boot_close() with > a > > single function mmc_boot_part_access(). > > > > drivers/mmc/mmc.c | 117 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++ > > include/mmc.h | 24 +++++++++++ > > 2 files changed, 141 insertions(+) > > > > diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c > > index 72e8ce6..c152934 100644 > > --- a/drivers/mmc/mmc.c > > +++ b/drivers/mmc/mmc.c > > @@ -1327,3 +1327,120 @@ int mmc_initialize(bd_t *bis) > > > > return 0; > > } > > + > > +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long > bootsize, > > + unsigned long rpmbsize) > > +{ > > + int err; > > + struct mmc_cmd cmd; > > + > > + /* Only use this command for raw EMMC moviNAND */ > > + /* Enter backdoor mode */ > > Should probably join these two comments. > Ok. > > + cmd.cmdidx = MMC_CMD_RES_MAN; > > + cmd.resp_type = MMC_RSP_R1b; > > + cmd.cmdarg = MMC_CMD62_ARG1; > > + > > + err = mmc_send_cmd(mmc, &cmd, NULL); > > + if (err) { > > + debug("mmc_boot_partition_size_change: Error1 = %d\n", > err); > > + return err; > > + } > > + > > + /* Boot partition changing mode */ > > + cmd.cmdidx = MMC_CMD_RES_MAN; > > + cmd.resp_type = MMC_RSP_R1b; > > + cmd.cmdarg = MMC_CMD62_ARG2; > > + > > + err = mmc_send_cmd(mmc, &cmd, NULL); > > + if (err) { > > + debug("mmc_boot_partition_size_change: Error2 = %d\n", > err); > > + return err; > > + } > > + /* boot partition size is multiple of 128KB */ > > + bootsize = ((bootsize*1024)/128); > > space around * and / > plus remove outer () > Ok. > > > + > > + /* Arg: boot partition size */ > > + cmd.cmdidx = MMC_CMD_RES_MAN; > > + cmd.resp_type = MMC_RSP_R1b; > > + cmd.cmdarg = bootsize; > > + > > + err = mmc_send_cmd(mmc, &cmd, NULL); > > + if (err) { > > + debug("mmc_boot_partition_size_change: Error3 = %d\n", > err); > > + return err; > > + } > > + /* RPMB partition size is multiple of 128KB */ > > + rpmbsize = ((rpmbsize*1024)/128); > > and here > Ok. > > > + /* Arg: RPMB partition size */ > > + cmd.cmdidx = MMC_CMD_RES_MAN; > > + cmd.resp_type = MMC_RSP_R1b; > > + cmd.cmdarg = rpmbsize; > > + > > + err = mmc_send_cmd(mmc, &cmd, NULL); > > + if (err) { > > + debug("mmc_boot_partition_size_change: Error4 = %d\n", > err); > > + return err; > > + } > > + return 0; > > +} > > + > > +/* This function shall form and send the commands to open / close the > > /* > * This function... > > Ok. > > + * boot partition specified by user. > > + * > > + * ack: 0x0 - No boot acknowledge sent (default) > > + * 0x1 - Boot acknowledge sent during boot operation > > + * part_num: User selects boot data that will be sent to master > > + * 0x0 - Device not boot enabled (default) > > + * 0x1 - Boot partition 1 enabled for boot > > + * 0x2 - Boot partition 2 enabled for boot > > + * access: User selects partitions to access > > + * 0x0 : No access to boot partition (default) > > + * 0x1 : R/W boot partition 1 > > + * 0x2 : R/W boot partition 2 > > + * 0x3 : R/W Replay Protected Memory Block (RPMB) > > + */ > > +int mmc_boot_part_access(struct mmc *mmc, u32 ack, u32 part_num, u32 > access) > > +{ > > + int err; > > + struct mmc_cmd cmd; > > + > > + /* Boot ack enable, boot partition enable , boot partition > access */ > > + cmd.cmdidx = MMC_CMD_SWITCH; > > + cmd.resp_type = MMC_RSP_R1b; > > + > > + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24 | > > + EXT_CSD_PART_CONF << 16 | > > + (EXT_CSD_BOOT_ACK(ack) | > > + EXT_CSD_BOOT_PART_NUM(part_num) | > > + EXT_CSD_PARTITION_ACCESS(access)) << 8); > > You can remove outer (). Might be nice to put () around the << > sub-expressions: > > cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) | > (EXT_CSD_PART_CONF << 16) | > > Ok. > > + > > + err = mmc_send_cmd(mmc, &cmd, NULL); > > + if (err) { > > + if (access) { > > + debug("mmc boot partition#%d open failure:" > > + "Error1 = %d\n", part_num, err); > > + } else { > > + debug("mmc boot partition#%d close failure:" > > + "Error = %d\n", part_num, err); > > + } > > + return err; > > + } > > + > > + if (access) { > > + /* 4bit transfer mode at booting time. */ > > + cmd.cmdidx = MMC_CMD_SWITCH; > > + cmd.resp_type = MMC_RSP_R1b; > > + > > + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24| > > Same here. Also space before |, and below > Ok. > > > + EXT_CSD_BOOT_BUS_WIDTH << 16| > > + ((1<<0) << 8)); > > + > > + err = mmc_send_cmd(mmc, &cmd, NULL); > > + if (err) { > > + debug("mmc boot partition#%d open failure:" > > + "Error2 = %d\n", part_num, err); > > + return err; > > + } > > + } > > + return 0; > > +} > > diff --git a/include/mmc.h b/include/mmc.h > > index a13e2bd..fcd9c54 100644 > > --- a/include/mmc.h > > +++ b/include/mmc.h > > @@ -86,6 +86,11 @@ > > #define MMC_CMD_APP_CMD 55 > > #define MMC_CMD_SPI_READ_OCR 58 > > #define MMC_CMD_SPI_CRC_ON_OFF 59 > > +#define MMC_CMD_RES_MAN 62 > > + > > +#define MMC_CMD62_ARG1 0xefac62ec > > +#define MMC_CMD62_ARG2 0xcbaea7 > > + > > > > #define SD_CMD_SEND_RELATIVE_ADDR 3 > > #define SD_CMD_SWITCH_FUNC 6 > > @@ -153,6 +158,7 @@ > > */ > > #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ > > #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ > > +#define EXT_CSD_BOOT_BUS_WIDTH 177 > > #define EXT_CSD_PART_CONF 179 /* R/W */ > > #define EXT_CSD_BUS_WIDTH 183 /* R/W */ > > #define EXT_CSD_HS_TIMING 185 /* R/W */ > > @@ -177,6 +183,16 @@ > > #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ > > #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ > > > > +#define EXT_CSD_BOOT_ACK_ENABLE (1<<6) > > +#define EXT_CSD_BOOT_PARTITION_ENABLE (1<<3) > > +#define EXT_CSD_PARTITION_ACCESS_ENABLE (1<<0) > > +#define EXT_CSD_PARTITION_ACCESS_DISABLE (0<<0) > > + > > +#define EXT_CSD_BOOT_ACK(x) (x<<6) > > +#define EXT_CSD_BOOT_PART_NUM(x) (x<<3) > > +#define EXT_CSD_PARTITION_ACCESS(x) (x<<0) > > + > > + > > #define R1_ILLEGAL_COMMAND (1 << 22) > > #define R1_APP_CMD (1 << 5) > > > > @@ -201,6 +217,11 @@ > > #define PART_ACCESS_MASK (0x7) > > #define PART_SUPPORT (0x1) > > > > +/* The number of MMC physical partitions. These consist of: > > + * boot partitions (2), general purpose partitions (4) in MMC v4.4. > > + */ > > +#define MMC_NUM_BOOT_PARTITION 2 > > + > > struct mmc_cid { > > unsigned long psn; > > unsigned short oid; > > @@ -275,6 +296,9 @@ int board_mmc_getcd(struct mmc *mmc); > > int mmc_switch_part(int dev_num, unsigned int part_num); > > int mmc_getcd(struct mmc *mmc); > > void spl_mmc_load(void) __noreturn; > > Could you please add full comments for these functions? > Ok. > > > +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long > bootsize, > > + unsigned long rpmbsize); > > +int mmc_boot_part_access(struct mmc *mmc, u32 ack, u32 part_num, u32 > access); > > > > #ifdef CONFIG_GENERIC_MMC > > #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI) > > -- > > 1.8.0 > > > > Regards, > Simon > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > http://lists.denx.de/mailman/listinfo/u-boot >
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c index 72e8ce6..c152934 100644 --- a/drivers/mmc/mmc.c +++ b/drivers/mmc/mmc.c @@ -1327,3 +1327,120 @@ int mmc_initialize(bd_t *bis) return 0; } + +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, + unsigned long rpmbsize) +{ + int err; + struct mmc_cmd cmd; + + /* Only use this command for raw EMMC moviNAND */ + /* Enter backdoor mode */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = MMC_CMD62_ARG1; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error1 = %d\n", err); + return err; + } + + /* Boot partition changing mode */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = MMC_CMD62_ARG2; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error2 = %d\n", err); + return err; + } + /* boot partition size is multiple of 128KB */ + bootsize = ((bootsize*1024)/128); + + /* Arg: boot partition size */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = bootsize; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error3 = %d\n", err); + return err; + } + /* RPMB partition size is multiple of 128KB */ + rpmbsize = ((rpmbsize*1024)/128); + /* Arg: RPMB partition size */ + cmd.cmdidx = MMC_CMD_RES_MAN; + cmd.resp_type = MMC_RSP_R1b; + cmd.cmdarg = rpmbsize; + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc_boot_partition_size_change: Error4 = %d\n", err); + return err; + } + return 0; +} + +/* This function shall form and send the commands to open / close the + * boot partition specified by user. + * + * ack: 0x0 - No boot acknowledge sent (default) + * 0x1 - Boot acknowledge sent during boot operation + * part_num: User selects boot data that will be sent to master + * 0x0 - Device not boot enabled (default) + * 0x1 - Boot partition 1 enabled for boot + * 0x2 - Boot partition 2 enabled for boot + * access: User selects partitions to access + * 0x0 : No access to boot partition (default) + * 0x1 : R/W boot partition 1 + * 0x2 : R/W boot partition 2 + * 0x3 : R/W Replay Protected Memory Block (RPMB) + */ +int mmc_boot_part_access(struct mmc *mmc, u32 ack, u32 part_num, u32 access) +{ + int err; + struct mmc_cmd cmd; + + /* Boot ack enable, boot partition enable , boot partition access */ + cmd.cmdidx = MMC_CMD_SWITCH; + cmd.resp_type = MMC_RSP_R1b; + + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24 | + EXT_CSD_PART_CONF << 16 | + (EXT_CSD_BOOT_ACK(ack) | + EXT_CSD_BOOT_PART_NUM(part_num) | + EXT_CSD_PARTITION_ACCESS(access)) << 8); + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + if (access) { + debug("mmc boot partition#%d open failure:" + "Error1 = %d\n", part_num, err); + } else { + debug("mmc boot partition#%d close failure:" + "Error = %d\n", part_num, err); + } + return err; + } + + if (access) { + /* 4bit transfer mode at booting time. */ + cmd.cmdidx = MMC_CMD_SWITCH; + cmd.resp_type = MMC_RSP_R1b; + + cmd.cmdarg = (MMC_SWITCH_MODE_WRITE_BYTE << 24| + EXT_CSD_BOOT_BUS_WIDTH << 16| + ((1<<0) << 8)); + + err = mmc_send_cmd(mmc, &cmd, NULL); + if (err) { + debug("mmc boot partition#%d open failure:" + "Error2 = %d\n", part_num, err); + return err; + } + } + return 0; +} diff --git a/include/mmc.h b/include/mmc.h index a13e2bd..fcd9c54 100644 --- a/include/mmc.h +++ b/include/mmc.h @@ -86,6 +86,11 @@ #define MMC_CMD_APP_CMD 55 #define MMC_CMD_SPI_READ_OCR 58 #define MMC_CMD_SPI_CRC_ON_OFF 59 +#define MMC_CMD_RES_MAN 62 + +#define MMC_CMD62_ARG1 0xefac62ec +#define MMC_CMD62_ARG2 0xcbaea7 + #define SD_CMD_SEND_RELATIVE_ADDR 3 #define SD_CMD_SWITCH_FUNC 6 @@ -153,6 +158,7 @@ */ #define EXT_CSD_PARTITIONING_SUPPORT 160 /* RO */ #define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */ +#define EXT_CSD_BOOT_BUS_WIDTH 177 #define EXT_CSD_PART_CONF 179 /* R/W */ #define EXT_CSD_BUS_WIDTH 183 /* R/W */ #define EXT_CSD_HS_TIMING 185 /* R/W */ @@ -177,6 +183,16 @@ #define EXT_CSD_BUS_WIDTH_4 1 /* Card is in 4 bit mode */ #define EXT_CSD_BUS_WIDTH_8 2 /* Card is in 8 bit mode */ +#define EXT_CSD_BOOT_ACK_ENABLE (1<<6) +#define EXT_CSD_BOOT_PARTITION_ENABLE (1<<3) +#define EXT_CSD_PARTITION_ACCESS_ENABLE (1<<0) +#define EXT_CSD_PARTITION_ACCESS_DISABLE (0<<0) + +#define EXT_CSD_BOOT_ACK(x) (x<<6) +#define EXT_CSD_BOOT_PART_NUM(x) (x<<3) +#define EXT_CSD_PARTITION_ACCESS(x) (x<<0) + + #define R1_ILLEGAL_COMMAND (1 << 22) #define R1_APP_CMD (1 << 5) @@ -201,6 +217,11 @@ #define PART_ACCESS_MASK (0x7) #define PART_SUPPORT (0x1) +/* The number of MMC physical partitions. These consist of: + * boot partitions (2), general purpose partitions (4) in MMC v4.4. + */ +#define MMC_NUM_BOOT_PARTITION 2 + struct mmc_cid { unsigned long psn; unsigned short oid; @@ -275,6 +296,9 @@ int board_mmc_getcd(struct mmc *mmc); int mmc_switch_part(int dev_num, unsigned int part_num); int mmc_getcd(struct mmc *mmc); void spl_mmc_load(void) __noreturn; +int mmc_boot_partition_size_change(struct mmc *mmc, unsigned long bootsize, + unsigned long rpmbsize); +int mmc_boot_part_access(struct mmc *mmc, u32 ack, u32 part_num, u32 access); #ifdef CONFIG_GENERIC_MMC #define mmc_host_is_spi(mmc) ((mmc)->host_caps & MMC_MODE_SPI)
This patch adds APIs to access(open / close) and to resize boot partiton of EMMC. Signed-off-by: Amar <amarendra.xt@samsung.com> --- Changes since V1: New patch. Changes since V2: 1)Updation of commit message and resubmition of proper patch set. Changes since V3: No change. Changes since V4: 1)Replaced the functions mmc_boot_open() & mmc_boot_close() with a single function mmc_boot_part_access(). drivers/mmc/mmc.c | 117 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ include/mmc.h | 24 +++++++++++ 2 files changed, 141 insertions(+)