@@ -577,6 +577,32 @@ static void sdw_modify_slave_status(struct sdw_slave *slave,
mutex_unlock(&slave->bus->bus_lock);
}
+int sdw_configure_dpn_intr(struct sdw_slave *slave,
+ int port, bool enable, int mask)
+{
+ u32 addr;
+ int ret;
+ u8 val = 0;
+
+ addr = SDW_DPN_INTMASK(port);
+
+ /* Set/Clear port ready interrupt mask */
+ if (enable) {
+ val |= mask;
+ val |= SDW_DPN_INT_PORT_READY;
+ } else {
+ val &= ~(mask);
+ val &= ~SDW_DPN_INT_PORT_READY;
+ }
+
+ ret = sdw_update(slave, addr, (mask | SDW_DPN_INT_PORT_READY), val);
+ if (ret < 0)
+ dev_err(slave->bus->dev,
+ "SDW_DPN_INTMASK write failed:%d", val);
+
+ return ret;
+}
+
static int sdw_initialize_slave(struct sdw_slave *slave)
{
struct sdw_slave_prop *prop = &slave->prop;
@@ -109,6 +109,8 @@ struct sdw_master_runtime {
struct sdw_dpn_prop *sdw_get_slave_dpn_prop(struct sdw_slave *slave,
enum sdw_data_direction direction,
unsigned int port_num);
+int sdw_configure_dpn_intr(struct sdw_slave *slave, int port,
+ bool enable, int mask);
int sdw_transfer(struct sdw_bus *bus, struct sdw_msg *msg);
int sdw_transfer_defer(struct sdw_bus *bus, struct sdw_msg *msg,
@@ -246,6 +246,277 @@ static int sdw_program_port_params(struct sdw_master_runtime *m_rt)
}
/**
+ * sdw_enable_disable_slave_ports: Enable/disable slave data port
+ *
+ * @bus: bus instance
+ * @s_rt: slave runtime
+ * @p_rt: port runtime
+ * @en: enable or disable operation
+ *
+ * This function only sets the enable/disable bits in the relevant bank, the
+ * actual enable/disable is done with a bank switch
+ */
+static int sdw_enable_disable_slave_ports(struct sdw_bus *bus,
+ struct sdw_slave_runtime *s_rt,
+ struct sdw_port_runtime *p_rt, bool en)
+{
+ struct sdw_transport_params *t_params = &p_rt->transport_params;
+ u32 addr;
+ int ret;
+
+ if (bus->params.next_bank)
+ addr = SDW_DPN_CHANNELEN_B1(p_rt->num);
+ else
+ addr = SDW_DPN_CHANNELEN_B0(p_rt->num);
+
+ /*
+ * Since bus doesn't support sharing a port across two streams,
+ * it is safe to reset this register
+ */
+ if (en)
+ ret = sdw_update(s_rt->slave, addr, 0xFF, p_rt->ch_mask);
+ else
+ ret = sdw_update(s_rt->slave, addr, 0xFF, 0x0);
+
+ if (ret < 0)
+ dev_err(&s_rt->slave->dev,
+ "Slave chn_en reg write failed:%d port:%d",
+ ret, t_params->port_num);
+
+ return ret;
+}
+
+static int sdw_enable_disable_master_ports(struct sdw_master_runtime *m_rt,
+ struct sdw_port_runtime *p_rt, bool en)
+{
+ struct sdw_transport_params *t_params = &p_rt->transport_params;
+ struct sdw_bus *bus = m_rt->bus;
+ struct sdw_enable_ch enable_ch;
+ int ret = 0;
+
+ enable_ch.port_num = p_rt->num;
+ enable_ch.ch_mask = p_rt->ch_mask;
+ enable_ch.enable = en;
+
+ /* Perform Master port channel(s) enable/disable */
+ if (bus->port_ops->dpn_port_enable_ch) {
+ ret = bus->port_ops->dpn_port_enable_ch(bus,
+ &enable_ch, bus->params.next_bank);
+ if (ret < 0) {
+ dev_err(bus->dev,
+ "Master chn_en write failed:%d port:%d",
+ ret, t_params->port_num);
+ return ret;
+ }
+ } else {
+ dev_err(bus->dev,
+ "dpn_port_enable_ch not supported, %s failed\n",
+ en ? "enable" : "disable");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * sdw_enable_disable_ports() - Enable/disable port(s) for Master and
+ * Slave(s)
+ *
+ * @m_rt: Master stream runtime
+ * @en: mode (enable/disable)
+ */
+static int sdw_enable_disable_ports(struct sdw_master_runtime *m_rt, bool en)
+{
+ struct sdw_port_runtime *s_port, *m_port;
+ struct sdw_slave_runtime *s_rt = NULL;
+ int ret = 0;
+
+ /* Enable/Disable Slave port(s) */
+ list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
+ list_for_each_entry(s_port, &s_rt->port_list, port_node) {
+ ret = sdw_enable_disable_slave_ports(m_rt->bus, s_rt,
+ s_port, en);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ /* Enable/Disable Master port(s) */
+ list_for_each_entry(m_port, &m_rt->port_list, port_node) {
+ ret = sdw_enable_disable_master_ports(m_rt, m_port, en);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sdw_do_port_prep(struct sdw_slave_runtime *s_rt,
+ struct sdw_prepare_ch prep_ch, enum sdw_port_prep_ops cmd)
+{
+ const struct sdw_slave_ops *ops = s_rt->slave->ops;
+ int ret;
+
+ if (ops->port_prep) {
+ ret = ops->port_prep(s_rt->slave, &prep_ch, cmd);
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "Slave Port Prep cmd %d failed: %d", cmd, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static int sdw_prep_deprep_slave_ports(struct sdw_bus *bus,
+ struct sdw_slave_runtime *s_rt,
+ struct sdw_port_runtime *p_rt, bool prep)
+{
+ struct completion *port_ready = NULL;
+ struct sdw_dpn_prop *dpn_prop;
+ struct sdw_prepare_ch prep_ch;
+ unsigned int time_left;
+ bool intr = false;
+ int ret = 0, val;
+ u32 addr;
+
+ prep_ch.num = p_rt->num;
+ prep_ch.ch_mask = p_rt->ch_mask;
+
+ dpn_prop = sdw_get_slave_dpn_prop(s_rt->slave,
+ s_rt->direction,
+ prep_ch.num);
+ if (!dpn_prop) {
+ dev_err(bus->dev,
+ "Slave Port:%d properties not found", prep_ch.num);
+ return -EINVAL;
+ }
+
+ prep_ch.prepare = prep;
+
+ prep_ch.bank = bus->params.next_bank;
+
+ if ((dpn_prop->device_interrupts) || (!dpn_prop->simple_ch_prep_sm))
+ intr = true;
+
+ /*
+ * Enable interrupt before Port prepare.
+ * For Port de-prepare, it is assumed that port
+ * was prepared earlier
+ */
+ if (prep && intr) {
+ ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep,
+ dpn_prop->device_interrupts);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Inform slave about the impending port prepare */
+ sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_PRE_PREP);
+
+ /* Prepare Slave port implementing CP_SM */
+ if (!dpn_prop->simple_ch_prep_sm) {
+ addr = SDW_DPN_PREPARECTRL(p_rt->num);
+
+ if (prep)
+ ret = sdw_update(s_rt->slave, addr,
+ 0xFF, p_rt->ch_mask);
+ else
+ ret = sdw_update(s_rt->slave, addr, 0xFF, 0x0);
+
+ if (ret < 0) {
+ dev_err(&s_rt->slave->dev,
+ "Slave prep_ctrl reg write failed");
+ return ret;
+ }
+
+ /* Wait for completion on port ready */
+ port_ready = &s_rt->slave->port_ready[prep_ch.num];
+ time_left = wait_for_completion_timeout(port_ready,
+ msecs_to_jiffies(dpn_prop->ch_prep_timeout));
+
+ val = sdw_read(s_rt->slave, SDW_DPN_PREPARESTATUS(p_rt->num));
+ val &= p_rt->ch_mask;
+ if (!time_left || val) {
+ dev_err(&s_rt->slave->dev,
+ "Chn prep failed for port:%d", prep_ch.num);
+ return -ETIMEDOUT;
+ }
+ }
+
+ /* Inform slaves about ports prepared */
+ sdw_do_port_prep(s_rt, prep_ch, SDW_OPS_PORT_POST_PREP);
+
+ /* Disable interrupt after Port de-prepare */
+ if ((!prep) && (intr))
+ ret = sdw_configure_dpn_intr(s_rt->slave, p_rt->num, prep,
+ dpn_prop->device_interrupts);
+
+ return ret;
+}
+
+static int sdw_prep_deprep_master_ports(struct sdw_master_runtime *m_rt,
+ struct sdw_port_runtime *p_rt, bool prep)
+{
+ struct sdw_transport_params *t_params = &p_rt->transport_params;
+ struct sdw_bus *bus = m_rt->bus;
+ const struct sdw_master_port_ops *ops = bus->port_ops;
+ struct sdw_prepare_ch prep_ch;
+ int ret = 0;
+
+ prep_ch.num = p_rt->num;
+ prep_ch.ch_mask = p_rt->ch_mask;
+ prep_ch.prepare = prep; /* Prepare/De-prepare */
+ prep_ch.bank = bus->params.next_bank;
+
+ /* Pre-prepare/Pre-deprepare port(s) */
+ if (ops->dpn_port_prep) {
+ ret = ops->dpn_port_prep(bus, &prep_ch);
+ if (ret < 0) {
+ dev_err(bus->dev, "Port prepare failed for port:%d",
+ t_params->port_num);
+ return ret;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * sdw_prep_deprep_ports() - Prepare/De-prepare port(s) for Master(s) and
+ * Slave(s)
+ *
+ * @m_rt: Master runtime handle
+ * @prep: Prepare or De-prepare
+ */
+static int sdw_prep_deprep_ports(struct sdw_master_runtime *m_rt, bool prep)
+{
+ struct sdw_slave_runtime *s_rt = NULL;
+ struct sdw_port_runtime *p_rt;
+ int ret = 0;
+
+ /* Prepare/De-prepare Slave port(s) */
+ list_for_each_entry(s_rt, &m_rt->slave_rt_list, m_rt_node) {
+ list_for_each_entry(p_rt, &s_rt->port_list, port_node) {
+ ret = sdw_prep_deprep_slave_ports(m_rt->bus, s_rt,
+ p_rt, prep);
+ if (ret < 0)
+ return ret;
+ }
+ }
+
+ /* Prepare/De-prepare Master port(s) */
+ list_for_each_entry(p_rt, &m_rt->port_list, port_node) {
+ ret = sdw_prep_deprep_master_ports(m_rt, p_rt, prep);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+
+/**
* sdw_release_stream() - Free the assigned stream runtime
*
* @stream: SoundWire stream runtime
@@ -377,6 +377,37 @@ enum sdw_reg_bank {
};
/**
+ * struct sdw_prepare_ch: Prepare/De-prepare Data Port channel
+ *
+ * @num: Port number
+ * @ch_mask: Active channel mask
+ * @prepare: Prepare (true) /de-prepare (false) channel
+ * @bank: Register bank, which bank Slave/Master driver should program for
+ * implementation defined registers. This is always updated to next_bank
+ * value read from bus params.
+ *
+ */
+struct sdw_prepare_ch {
+ unsigned int num;
+ unsigned int ch_mask;
+ bool prepare;
+ unsigned int bank;
+};
+
+/**
+ * enum sdw_port_prep_ops: Prepare operations for Data Port
+ *
+ * @SDW_OPS_PORT_PRE_PREP: Pre prepare operation for the Port
+ * @SDW_OPS_PORT_PREP: Prepare operation for the Port
+ * @SDW_OPS_PORT_POST_PREP: Post prepare operation for the Port
+ */
+enum sdw_port_prep_ops {
+ SDW_OPS_PORT_PRE_PREP = 0,
+ SDW_OPS_PORT_PREP = 1,
+ SDW_OPS_PORT_POST_PREP = 2,
+};
+
+/**
* struct sdw_bus_params: Structure holding bus configuration
*
* @curr_bank: Current bank in use (BANK0/BANK1)
@@ -395,6 +426,7 @@ struct sdw_bus_params {
* @interrupt_callback: Device interrupt notification (invoked in thread
* context)
* @update_status: Update Slave status
+ * @port_prep: Prepare the port with parameters
*/
struct sdw_slave_ops {
int (*read_prop)(struct sdw_slave *sdw);
@@ -402,6 +434,9 @@ struct sdw_slave_ops {
struct sdw_slave_intr_status *status);
int (*update_status)(struct sdw_slave *slave,
enum sdw_slave_status status);
+ int (*port_prep)(struct sdw_slave *slave,
+ struct sdw_prepare_ch *prepare_ch,
+ enum sdw_port_prep_ops pre_ops);
};
/**
@@ -506,6 +541,19 @@ struct sdw_transport_params {
};
/**
+ * struct sdw_enable_ch: Enable/disable Data Port channel
+ *
+ * @num: Port number
+ * @ch_mask: Active channel mask
+ * @enable: Enable (true) /disable (false) channel
+ */
+struct sdw_enable_ch {
+ unsigned int port_num;
+ unsigned int ch_mask;
+ bool enable;
+};
+
+/**
* struct sdw_master_port_ops: Callback functions from bus to Master
* driver to set Master Data ports.
*
@@ -513,6 +561,8 @@ struct sdw_transport_params {
* Mandatory callback
* @dpn_set_port_transport_params: Set transport parameters for the Master
* Port. Mandatory callback
+ * @dpn_port_prep: Port prepare operations for the Master Data Port.
+ * @dpn_port_enable_ch: Enable the channels of Master Port.
*/
struct sdw_master_port_ops {
int (*dpn_set_port_params)(struct sdw_bus *bus,
@@ -521,6 +571,10 @@ struct sdw_master_port_ops {
int (*dpn_set_port_transport_params)(struct sdw_bus *bus,
struct sdw_transport_params *transport_params,
enum sdw_reg_bank bank);
+ int (*dpn_port_prep)(struct sdw_bus *bus,
+ struct sdw_prepare_ch *prepare_ch);
+ int (*dpn_port_enable_ch)(struct sdw_bus *bus,
+ struct sdw_enable_ch *enable_ch, unsigned int bank);
};
struct sdw_msg;