diff mbox series

[02/14] arm64: dts: meson-axg: add vcc 5v regulator on the s400

Message ID 20180724125238.14567-3-jbrunet@baylibre.com
State New
Headers show
Series arm64: dts: meson-axg: add audio support | expand

Commit Message

Jerome Brunet July 24, 2018, 12:52 p.m. UTC 
This regulator is controlled by a GPIO and supplies various devices
on the board, such as the lineout codec, the usb supply or the lcd
controller.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>

---
 arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 11 +++++++++++
 1 file changed, 11 insertions(+)

-- 
2.17.1
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 09c7909a78ea..5937d8c3a6ed 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -104,6 +104,17 @@ 
 		regulator-always-on;
 	};
 
+	vcc_5v: regulator-vcc_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&main_12v>;
+
+		gpio = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
 	emmc_pwrseq: emmc-pwrseq {
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>;