@@ -57,3 +57,14 @@ config SCSI_UFSHCD_PCI
If you have a controller with this interface, say Y or M here.
If unsure, say N.
+
+config SCSI_UFSHCD_PLATFORM
+ tristate "Platform bus based UFS Controller support"
+ depends on SCSI_UFSHCD
+ ---help---
+ This selects the UFS host controller support. Select this if
+ you have an UFS controller on Platform bus.
+
+ If you have a controller with this interface, say Y or M here.
+
+ If unsure, say N.
@@ -1,3 +1,4 @@
# UFSHCD makefile
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
+obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
new file mode 100644
@@ -0,0 +1,217 @@
+/*
+ * Universal Flash Storage Host controller Platform bus based glue driver
+ *
+ * This code is based on drivers/scsi/ufs/ufshcd-pltfrm.c
+ * Copyright (C) 2011-2013 Samsung India Software Operations
+ *
+ * Authors:
+ * Santosh Yaraganavi <santosh.sy@samsung.com>
+ * Vinayak Holikatti <h.vinayak@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * See the COPYING file in the top-level directory or visit
+ * <http://www.gnu.org/licenses/gpl-2.0.html>
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * This program is provided "AS IS" and "WITH ALL FAULTS" and
+ * without warranty of any kind. You are solely responsible for
+ * determining the appropriateness of using and distributing
+ * the program and assume all risks associated with your exercise
+ * of rights with respect to the program, including but not limited
+ * to infringement of third party rights, the risks and costs of
+ * program errors, damage to or loss of data, programs or equipment,
+ * and unavailability or interruption of operations. Under no
+ * circumstances will the contributor of this Program be liable for
+ * any damages of any kind arising from your use or distribution of
+ * this program.
+ */
+
+#include "ufshcd.h"
+#include <linux/platform_device.h>
+
+#ifdef CONFIG_PM
+/**
+ * ufshcd_pltfrm_suspend - suspend power management function
+ * @pdev: pointer to Platform device handle
+ * @mesg: power state
+ *
+ * Returns 0
+ */
+static int ufshcd_pltfrm_suspend(struct platform_device *pdev,
+ pm_message_t mesg)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ /*
+ * TODO:
+ * 1. Call ufshcd_suspend
+ * 2. Do bus specific power management
+ */
+
+ disable_irq(hba->irq);
+
+ return 0;
+}
+
+/**
+ * ufshcd_pltfrm_resume - resume power management function
+ * @pdev: pointer to Platform device handle
+ *
+ * Returns 0
+ */
+static int ufshcd_pltfrm_resume(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ /*
+ * TODO:
+ * 1. Call ufshcd_resume.
+ * 2. Do bus specific wake up
+ */
+
+ enable_irq(hba->irq);
+
+ return 0;
+}
+#else
+#define ufshcd_pltfrm_suspend NULL
+#define ufshcd_pltfrm_resume NULL
+#endif
+
+/**
+ * ufshcd_pltfrm_probe - probe routine of the driver
+ * @pdev: pointer to Platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devinit
+ufshcd_pltfrm_probe(struct platform_device *pdev)
+{
+ struct ufs_hba *hba;
+ void __iomem *mmio_base;
+ struct resource *mem_res;
+ struct resource *irq_res;
+ resource_size_t mem_size;
+ int err;
+ struct device *dev = &pdev->dev;
+
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_res) {
+ dev_err(&pdev->dev,
+ "Memory resource not available\n");
+ err = -ENODEV;
+ goto out_error;
+ }
+
+ mem_size = resource_size(mem_res);
+ if (!request_mem_region(mem_res->start, mem_size, "ufshcd")) {
+ dev_err(&pdev->dev,
+ "Cannot reserve the memory resource\n");
+ err = -EBUSY;
+ goto out_error;
+ }
+
+ mmio_base = ioremap_nocache(mem_res->start, mem_size);
+ if (!mmio_base) {
+ dev_err(&pdev->dev, "memory map failed\n");
+ err = -ENOMEM;
+ goto out_release_regions;
+ }
+
+ irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq_res) {
+ dev_err(&pdev->dev, "IRQ resource not available\n");
+ err = -ENODEV;
+ goto out_iounmap;
+ }
+
+ err = dma_set_coherent_mask(dev, dev->coherent_dma_mask);
+ if (err) {
+ dev_err(&pdev->dev, "set dma mask failed\n");
+ goto out_iounmap;
+ }
+
+ err = ufshcd_init(&pdev->dev, &hba, mmio_base, irq_res->start);
+ if (err) {
+ dev_err(&pdev->dev, "Intialization failed\n");
+ goto out_iounmap;
+ }
+
+ platform_set_drvdata(pdev, hba);
+
+ return 0;
+
+out_iounmap:
+ iounmap(mmio_base);
+out_release_regions:
+ release_mem_region(mem_res->start, mem_size);
+out_error:
+ return err;
+}
+
+/**
+ * ufshcd_pltfrm_remove - remove platform driver routine
+ * @pdev: pointer to platform device handle
+ *
+ * Returns 0 on success, non-zero value on failure
+ */
+static int __devexit ufshcd_pltfrm_remove(struct platform_device *pdev)
+{
+ struct resource *mem_res;
+ resource_size_t mem_size;
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ disable_irq(hba->irq);
+
+ /* Some buggy controllers raise interrupt after
+ * the resources are removed. So first we unregister the
+ * irq handler and then the resources used by driver
+ */
+
+ free_irq(hba->irq, hba);
+ ufshcd_remove(hba);
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem_res)
+ dev_err(&pdev->dev, "ufshcd: Memory resource not available\n");
+ else {
+ mem_size = resource_size(mem_res);
+ release_mem_region(mem_res->start, mem_size);
+ }
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static const struct of_device_id ufs_of_match[] = {
+ { .compatible = "jedec,ufs-1.1"},
+};
+
+static const struct dev_pm_ops ufshcd_dev_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+};
+
+static struct platform_driver ufshcd_pltfrm_driver = {
+ .probe = ufshcd_pltfrm_probe,
+ .remove = __devexit_p(ufshcd_pltfrm_remove),
+ .driver = {
+ .name = "ufshcd",
+ .owner = THIS_MODULE,
+ .pm = &ufshcd_dev_pm_ops,
+ .of_match_table = ufs_of_match,
+ },
+};
+
+module_platform_driver(ufshcd_pltfrm_driver);
+
+MODULE_AUTHOR("Santosh Yaragnavi <santosh.sy@samsung.com>");
+MODULE_AUTHOR("Vinayak Holikatti <h.vinayak@samsung.com>");
+MODULE_DESCRIPTION("UFS host controller Pltform bus based glue driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(UFSHCD_DRIVER_VERSION);