diff mbox series

[net-next,02/11] net: hns3: Fix for multicast failure

Message ID 20180903102156.18676-3-salil.mehta@huawei.com
State New
Headers show
Series Misc. bug fixes & small enhancements for HNS3 Driver | expand

Commit Message

Salil Mehta Sept. 3, 2018, 10:21 a.m. UTC 
From: Huazhong Tan <tanhuazhong@huawei.com>


When the lower 24 bits of the IPV6 link-local addresses at both
ends are the same, the multicast MAC address for Neigbour Discovery
is the same. The multicast for Neigbour Discovery will fail.

This patch fixes it by including the bonding uplink port in the
multicast group.

Fixes: 46a3df9f9718("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>

Signed-off-by: Peng Li <lipeng321@huawei.com>

Signed-off-by: Salil Mehta <salil.mehta@huawei.com>

---
 drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

-- 
2.7.4
diff mbox series

Patch

diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
index 1c2ab7e..8f1339a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
@@ -4362,7 +4362,7 @@  int hclge_add_mc_addr_common(struct hclge_vport *vport,
 	hnae3_set_bit(req.flags, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT1_EN_B, 1);
-	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
+	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hclge_prepare_mac_addr(&req, addr);
 	status = hclge_lookup_mac_vlan_tbl(vport, &req, desc, true);
 	if (!status) {
@@ -4429,7 +4429,7 @@  int hclge_rm_mc_addr_common(struct hclge_vport *vport,
 	hnae3_set_bit(req.flags, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
 	hnae3_set_bit(req.entry_type, HCLGE_MAC_VLAN_BIT1_EN_B, 1);
-	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 0);
+	hnae3_set_bit(req.mc_mac_en, HCLGE_MAC_VLAN_BIT0_EN_B, 1);
 	hclge_prepare_mac_addr(&req, addr);
 	status = hclge_lookup_mac_vlan_tbl(vport, &req, desc, true);
 	if (!status) {