diff mbox series

gpio: Slightly more helpful debugfs

Message ID 20181001210617.5247-1-linus.walleij@linaro.org
State Accepted
Commit 90fd227029a25b452fd39dec6d557212d03d79b1
Headers show
Series gpio: Slightly more helpful debugfs | expand

Commit Message

Linus Walleij Oct. 1, 2018, 9:06 p.m. UTC 
This at least makes debugfs print if the line is active
high or low. That is pretty helpful as what we display
as "lo" or "hi" is the raw physical level of the line.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

---
 drivers/gpio/gpiolib.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)

-- 
2.17.1
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 267c1cc64b1f..0002d180a062 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -4585,8 +4585,9 @@  static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
 	struct gpio_chip	*chip = gdev->chip;
 	unsigned		gpio = gdev->base;
 	struct gpio_desc	*gdesc = &gdev->descs[0];
-	int			is_out;
-	int			is_irq;
+	bool			is_out;
+	bool			is_irq;
+	bool			active_low;
 
 	for (i = 0; i < gdev->ngpio; i++, gpio++, gdesc++) {
 		if (!test_bit(FLAG_REQUESTED, &gdesc->flags)) {
@@ -4600,11 +4601,13 @@  static void gpiolib_dbg_show(struct seq_file *s, struct gpio_device *gdev)
 		gpiod_get_direction(gdesc);
 		is_out = test_bit(FLAG_IS_OUT, &gdesc->flags);
 		is_irq = test_bit(FLAG_USED_AS_IRQ, &gdesc->flags);
-		seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s",
+		active_low = test_bit(FLAG_ACTIVE_LOW, &gdesc->flags);
+		seq_printf(s, " gpio-%-3d (%-20.20s|%-20.20s) %s %s %s%s",
 			gpio, gdesc->name ? gdesc->name : "", gdesc->label,
 			is_out ? "out" : "in ",
 			chip->get ? (chip->get(chip, i) ? "hi" : "lo") : "?  ",
-			is_irq ? "IRQ" : "   ");
+			is_irq ? "IRQ " : "",
+			active_low ? "ACTIVE LOW" : "");
 		seq_printf(s, "\n");
 	}
 }