@@ -591,13 +591,16 @@ static const unsigned int tvc_3512_pins[] = {
319, /* TVC_DATA[1] */
301, /* TVC_DATA[2] */
283, /* TVC_DATA[3] */
- 265, /* TVC_CLK */
320, /* TVC_DATA[4] */
302, /* TVC_DATA[5] */
284, /* TVC_DATA[6] */
266, /* TVC_DATA[7] */
};
+static const unsigned int tvc_clk_3512_pins[] = {
+ 265, /* TVC_CLK */
+};
+
/* NAND flash pins */
static const unsigned int nflash_3512_pins[] = {
199, 200, 201, 202, 216, 217, 218, 219, 220, 234, 235, 236, 237, 252,
@@ -629,7 +632,7 @@ static const unsigned int pflash_3512_pins_extended[] = {
/* Serial flash pins CE0, CE1, DI, DO, CK */
static const unsigned int sflash_3512_pins[] = { 230, 231, 232, 233, 211 };
-/* The GPIO0A (0) pin overlap with TVC and extended parallel flash */
+/* The GPIO0A (0) pin overlap with TVC CLK and extended parallel flash */
static const unsigned int gpio0a_3512_pins[] = { 265 };
/* The GPIO0B (1-4) pins overlap with TVC and ICE */
@@ -823,7 +826,13 @@ static const struct gemini_pin_group gemini_3512_pin_groups[] = {
.num_pins = ARRAY_SIZE(tvc_3512_pins),
/* Conflict with character LCD and ICE */
.mask = LCD_PADS_ENABLE,
- .value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE,
+ .value = TVC_PADS_ENABLE,
+ },
+ {
+ .name = "tvcclkgrp",
+ .pins = tvc_clk_3512_pins,
+ .num_pins = ARRAY_SIZE(tvc_clk_3512_pins),
+ .value = TVC_CLK_PAD_ENABLE,
},
/*
* The construction is done such that it is possible to use a serial
@@ -860,8 +869,8 @@ static const struct gemini_pin_group gemini_3512_pin_groups[] = {
.name = "gpio0agrp",
.pins = gpio0a_3512_pins,
.num_pins = ARRAY_SIZE(gpio0a_3512_pins),
- /* Conflict with TVC */
- .mask = TVC_PADS_ENABLE,
+ /* Conflict with TVC CLK */
+ .mask = TVC_CLK_PAD_ENABLE,
},
{
.name = "gpio0bgrp",
@@ -1531,13 +1540,16 @@ static const unsigned int tvc_3516_pins[] = {
311, /* TVC_DATA[1] */
394, /* TVC_DATA[2] */
374, /* TVC_DATA[3] */
- 333, /* TVC_CLK */
354, /* TVC_DATA[4] */
395, /* TVC_DATA[5] */
312, /* TVC_DATA[6] */
334, /* TVC_DATA[7] */
};
+static const unsigned int tvc_clk_3516_pins[] = {
+ 333, /* TVC_CLK */
+};
+
/* NAND flash pins */
static const unsigned int nflash_3516_pins[] = {
243, 260, 261, 224, 280, 262, 281, 264, 300, 263, 282, 301, 320, 283,
@@ -1570,7 +1582,7 @@ static const unsigned int pflash_3516_pins_extended[] = {
static const unsigned int sflash_3516_pins[] = { 296, 338, 295, 359, 339 };
/* The GPIO0A (0-4) pins overlap with TVC and extended parallel flash */
-static const unsigned int gpio0a_3516_pins[] = { 333, 354, 395, 312, 334 };
+static const unsigned int gpio0a_3516_pins[] = { 354, 395, 312, 334 };
/* The GPIO0B (5-7) pins overlap with ICE */
static const unsigned int gpio0b_3516_pins[] = { 375, 396, 376 };
@@ -1602,6 +1614,9 @@ static const unsigned int gpio0j_3516_pins[] = { 359, 339 };
/* The GPIO0K (30,31) pins overlap with NAND flash */
static const unsigned int gpio0k_3516_pins[] = { 275, 298 };
+/* The GPIO0L (0) pins overlap with TVC_CLK */
+static const unsigned int gpio0l_3516_pins[] = { 333 };
+
/* The GPIO1A (0-4) pins that overlap with IDE and parallel flash */
static const unsigned int gpio1a_3516_pins[] = { 221, 200, 222, 201, 220 };
@@ -1761,7 +1776,13 @@ static const struct gemini_pin_group gemini_3516_pin_groups[] = {
.num_pins = ARRAY_SIZE(tvc_3516_pins),
/* Conflict with character LCD */
.mask = LCD_PADS_ENABLE,
- .value = TVC_PADS_ENABLE | TVC_CLK_PAD_ENABLE,
+ .value = TVC_PADS_ENABLE,
+ },
+ {
+ .name = "tvcclkgrp",
+ .pins = tvc_clk_3516_pins,
+ .num_pins = ARRAY_SIZE(tvc_clk_3516_pins),
+ .value = TVC_CLK_PAD_ENABLE,
},
/*
* The construction is done such that it is possible to use a serial
@@ -1872,6 +1893,13 @@ static const struct gemini_pin_group gemini_3516_pin_groups[] = {
/* Conflict with parallel and NAND flash */
.value = PFLASH_PADS_DISABLE | NAND_PADS_DISABLE,
},
+ {
+ .name = "gpio0lgrp",
+ .pins = gpio0l_3516_pins,
+ .num_pins = ARRAY_SIZE(gpio0l_3516_pins),
+ /* Conflict with TVE CLK */
+ .mask = TVC_CLK_PAD_ENABLE,
+ },
{
.name = "gpio1agrp",
.pins = gpio1a_3516_pins,
The previous fix made the TVC clock get muxed in on the D-Link DIR-685 instead of giving nagging warnings of this not working. Not good. We didn't want that, as it breaks video. Create a specific group for the TVC CLK, and break out a specific GPIO group for it on the SL3516 so we can use that line as GPIO if we don't need the TVC CLK. Fixes: d17f477c5bc6 ("pinctrl: gemini: Mask and set properly") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/pinctrl/pinctrl-gemini.c | 44 ++++++++++++++++++++++++++------ 1 file changed, 36 insertions(+), 8 deletions(-) -- 2.17.1