diff mbox series

[V3,03/10] OPP: Separate out custom OPP handler specific code

Message ID 2b94b3d1454a5e5da9e1a984a1a87cc852b44213.1540446493.git.viresh.kumar@linaro.org
State New
Headers show
Series OPP: Support multiple power-domains per device | expand

Commit Message

Viresh Kumar Oct. 25, 2018, 5:52 a.m. UTC 
Create a separate routine to take care of custom set_opp() handler
specific stuff.

Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

---
 drivers/opp/core.c | 67 +++++++++++++++++++++++++++-------------------
 1 file changed, 40 insertions(+), 27 deletions(-)

-- 
2.19.1.568.g152ad8e3369a
diff mbox series

Patch

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 2c2df4e4fc14..ebb3b648e0fd 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -635,6 +635,34 @@  static int _generic_set_opp_regulator(const struct opp_table *opp_table,
 	return ret;
 }
 
+static int _set_opp_custom(const struct opp_table *opp_table,
+			   struct device *dev, unsigned long old_freq,
+			   unsigned long freq,
+			   struct dev_pm_opp_supply *old_supply,
+			   struct dev_pm_opp_supply *new_supply)
+{
+	struct dev_pm_set_opp_data *data;
+	int size;
+
+	data = opp_table->set_opp_data;
+	data->regulators = opp_table->regulators;
+	data->regulator_count = opp_table->regulator_count;
+	data->clk = opp_table->clk;
+	data->dev = dev;
+
+	data->old_opp.rate = old_freq;
+	size = sizeof(*old_supply) * opp_table->regulator_count;
+	if (IS_ERR(old_supply))
+		memset(data->old_opp.supplies, 0, size);
+	else
+		memcpy(data->old_opp.supplies, old_supply, size);
+
+	data->new_opp.rate = freq;
+	memcpy(data->new_opp.supplies, new_supply, size);
+
+	return opp_table->set_opp(data);
+}
+
 /**
  * dev_pm_opp_set_rate() - Configure new OPP based on frequency
  * @dev:	 device for which we do this operation
@@ -649,7 +677,7 @@  int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	unsigned long freq, old_freq;
 	struct dev_pm_opp *old_opp, *opp;
 	struct clk *clk;
-	int ret, size;
+	int ret;
 
 	if (unlikely(!target_freq)) {
 		dev_err(dev, "%s: Invalid target frequency %lu\n", __func__,
@@ -702,8 +730,17 @@  int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 	dev_dbg(dev, "%s: switching OPP: %lu Hz --> %lu Hz\n", __func__,
 		old_freq, freq);
 
-	/* Only frequency scaling */
-	if (!opp_table->regulators) {
+	if (opp_table->set_opp) {
+		ret = _set_opp_custom(opp_table, dev, old_freq, freq,
+				      IS_ERR(old_opp) ? NULL : old_opp->supplies,
+				      opp->supplies);
+	} else if (opp_table->regulators) {
+		ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq,
+						 IS_ERR(old_opp) ? NULL : old_opp->supplies,
+						 opp->supplies);
+	} else {
+		/* Only frequency scaling */
+
 		/*
 		 * We don't support devices with both regulator and
 		 * domain performance-state for now.
@@ -714,30 +751,6 @@  int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 						      opp->pstate);
 		else
 			ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq);
-	} else if (!opp_table->set_opp) {
-		ret = _generic_set_opp_regulator(opp_table, dev, old_freq, freq,
-						 IS_ERR(old_opp) ? NULL : old_opp->supplies,
-						 opp->supplies);
-	} else {
-		struct dev_pm_set_opp_data *data;
-
-		data = opp_table->set_opp_data;
-		data->regulators = opp_table->regulators;
-		data->regulator_count = opp_table->regulator_count;
-		data->clk = clk;
-		data->dev = dev;
-
-		data->old_opp.rate = old_freq;
-		size = sizeof(*opp->supplies) * opp_table->regulator_count;
-		if (IS_ERR(old_opp))
-			memset(data->old_opp.supplies, 0, size);
-		else
-			memcpy(data->old_opp.supplies, old_opp->supplies, size);
-
-		data->new_opp.rate = freq;
-		memcpy(data->new_opp.supplies, opp->supplies, size);
-
-		ret = opp_table->set_opp(data);
 	}
 
 	dev_pm_opp_put(opp);