@@ -474,7 +474,8 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
return 0;
}
-static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
+static int sun4i_usb_phy_set_mode(struct phy *_phy,
+ enum phy_mode mode, int submode)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
@@ -152,7 +152,8 @@ static int phy_meson_gxl_usb2_reset(struct phy *phy)
return 0;
}
-static int phy_meson_gxl_usb2_set_mode(struct phy *phy, enum phy_mode mode)
+static int phy_meson_gxl_usb2_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
struct phy_meson_gxl_usb2_priv *priv = phy_get_drvdata(phy);
@@ -209,7 +210,7 @@ static int phy_meson_gxl_usb2_power_on(struct phy *phy)
/* power on the PHY by taking it out of reset mode */
regmap_update_bits(priv->regmap, U2P_R0, U2P_R0_POWER_ON_RESET, 0);
- ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode);
+ ret = phy_meson_gxl_usb2_set_mode(phy, priv->mode, 0);
if (ret) {
phy_meson_gxl_usb2_power_off(phy);
@@ -119,7 +119,8 @@ static int phy_meson_gxl_usb3_power_off(struct phy *phy)
return 0;
}
-static int phy_meson_gxl_usb3_set_mode(struct phy *phy, enum phy_mode mode)
+static int phy_meson_gxl_usb3_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
struct phy_meson_gxl_usb3_priv *priv = phy_get_drvdata(phy);
@@ -164,7 +165,7 @@ static int phy_meson_gxl_usb3_init(struct phy *phy)
if (ret)
goto err_disable_clk_phy;
- ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode);
+ ret = phy_meson_gxl_usb3_set_mode(phy, priv->mode, 0);
if (ret)
goto err_disable_clk_peripheral;
@@ -512,7 +512,8 @@ static int mvebu_comphy_power_on(struct phy *phy)
return ret;
}
-static int mvebu_comphy_set_mode(struct phy *phy, enum phy_mode mode)
+static int mvebu_comphy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
@@ -971,7 +971,7 @@ static int mtk_phy_exit(struct phy *phy)
return 0;
}
-static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct mtk_phy_instance *instance = phy_get_drvdata(phy);
struct mtk_tphy *tphy = dev_get_drvdata(phy->dev.parent);
@@ -426,7 +426,7 @@ static int mtk_phy_exit(struct phy *phy)
return 0;
}
-static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int mtk_phy_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct xsphy_instance *inst = phy_get_drvdata(phy);
struct mtk_xsphy *xsphy = dev_get_drvdata(phy->dev.parent);
@@ -158,7 +158,7 @@ static const struct serdes_mux ocelot_serdes_muxes[] = {
HSIO_HW_CFG_PCIE_ENA),
};
-static int serdes_set_mode(struct phy *phy, enum phy_mode mode)
+static int serdes_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct serdes_macro *macro = phy_get_drvdata(phy);
unsigned int i;
@@ -360,7 +360,7 @@ int phy_power_off(struct phy *phy)
}
EXPORT_SYMBOL_GPL(phy_power_off);
-int phy_set_mode(struct phy *phy, enum phy_mode mode)
+int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode)
{
int ret;
@@ -368,14 +368,14 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
return 0;
mutex_lock(&phy->mutex);
- ret = phy->ops->set_mode(phy, mode);
+ ret = phy->ops->set_mode(phy, mode, submode);
if (!ret)
phy->attrs.mode = mode;
mutex_unlock(&phy->mutex);
return ret;
}
-EXPORT_SYMBOL_GPL(phy_set_mode);
+EXPORT_SYMBOL_GPL(phy_set_mode_ext);
int phy_reset(struct phy *phy)
{
@@ -1365,7 +1365,8 @@ static int qcom_qmp_phy_poweron(struct phy *phy)
return ret;
}
-static int qcom_qmp_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int qcom_qmp_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
struct qmp_phy *qphy = phy_get_drvdata(phy);
struct qcom_qmp *qmp = qphy->qmp;
@@ -423,7 +423,8 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
}
-static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int qusb2_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
struct qusb2_phy *qphy = phy_get_drvdata(phy);
@@ -65,7 +65,8 @@ static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
}
static
-int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy,
+ enum phy_mode mode, int submode)
{
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
@@ -84,7 +84,8 @@ static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
}
static
-int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy, enum phy_mode mode)
+int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy,
+ enum phy_mode mode, int submode)
{
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
@@ -42,7 +42,8 @@ struct qcom_usb_hs_phy {
struct notifier_block vbus_notify;
};
-static int qcom_usb_hs_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int qcom_usb_hs_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
struct qcom_usb_hs_phy *uphy = phy_get_drvdata(phy);
u8 addr;
@@ -93,7 +93,8 @@ static int da8xx_usb20_phy_power_off(struct phy *phy)
return 0;
}
-static int da8xx_usb20_phy_set_mode(struct phy *phy, enum phy_mode mode)
+static int da8xx_usb20_phy_set_mode(struct phy *phy,
+ enum phy_mode mode, int submode)
{
struct da8xx_usb_phy *d_phy = phy_get_drvdata(phy);
u32 val;
@@ -53,7 +53,7 @@ static int tusb1210_power_off(struct phy *phy)
return 0;
}
-static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode)
+static int tusb1210_set_mode(struct phy *phy, enum phy_mode mode, int submode)
{
struct tusb1210 *tusb = phy_get_drvdata(phy);
int ret;
@@ -60,7 +60,7 @@ struct phy_ops {
int (*exit)(struct phy *phy);
int (*power_on)(struct phy *phy);
int (*power_off)(struct phy *phy);
- int (*set_mode)(struct phy *phy, enum phy_mode mode);
+ int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode);
int (*reset)(struct phy *phy);
int (*calibrate)(struct phy *phy);
struct module *owner;
@@ -164,7 +164,10 @@ int phy_init(struct phy *phy);
int phy_exit(struct phy *phy);
int phy_power_on(struct phy *phy);
int phy_power_off(struct phy *phy);
-int phy_set_mode(struct phy *phy, enum phy_mode mode);
+int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode);
+#define phy_set_mode(phy, mode) \
+ phy_set_mode_ext(phy, mode, 0)
+
static inline enum phy_mode phy_get_mode(struct phy *phy)
{
return phy->attrs.mode;
@@ -278,13 +281,17 @@ static inline int phy_power_off(struct phy *phy)
return -ENOSYS;
}
-static inline int phy_set_mode(struct phy *phy, enum phy_mode mode)
+static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode,
+ int submode)
{
if (!phy)
return 0;
return -ENOSYS;
}
+#define phy_set_mode(phy, mode) \
+ phy_set_mode_ext(phy, mode, 0)
+
static inline enum phy_mode phy_get_mode(struct phy *phy)
{
return PHY_MODE_INVALID;
Currently the attempt to add support for Ethernet interface mode PHY (MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and duplicate there values from phy_interface_t enum (or introduce more PHY callbacks) [1]. Both approaches are ineffective and would lead to fast bloating of enum phy_mode or struct phy_ops in the process of adding more PHYs for different subsystems which will make them unmaintainable. As discussed in [1] the solution could be to introduce dual level PHYs mode configuration - PHY mode and PHY submode. The PHY mode will define generic PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem specific interface mode. The last is usually already defined in corresponding subsystem headers (phy_interface_t for Ethernet, enum usb_device_speed for USB). This patch is cumulative change which refactors PHY framework code to support dual level PHYs mode configuration - PHY mode and PHY submode. It extends .set_mode() callback to support additional parameter "int submode" and converts all corresponding PHY drivers to support new .set_mode() callback declaration. The new extended PHY API int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) is introduced to support dual level PHYs mode configuration and existing phy_set_mode() API is converted to macros, so PHY framework consumers do not need to be changed (~21 matches). [1] https://lkml.org/lkml/2018/10/25/366 Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> --- drivers/phy/allwinner/phy-sun4i-usb.c | 3 ++- drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +++-- drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +++-- drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 3 ++- drivers/phy/mediatek/phy-mtk-tphy.c | 2 +- drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +- drivers/phy/mscc/phy-ocelot-serdes.c | 2 +- drivers/phy/phy-core.c | 6 +++--- drivers/phy/qualcomm/phy-qcom-qmp.c | 3 ++- drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 ++- drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 ++- drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 ++- drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 ++- drivers/phy/ti/phy-da8xx-usb.c | 3 ++- drivers/phy/ti/phy-tusb1210.c | 2 +- include/linux/phy/phy.h | 13 ++++++++++--- 16 files changed, 39 insertions(+), 22 deletions(-) -- 2.10.5