@@ -8,3 +8,5 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb
+dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb
new file mode 100644
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS404 EVB 1000";
+ compatible = "qcom,qcs404-evb";
+};
new file mode 100644
@@ -0,0 +1,11 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+/dts-v1/;
+
+#include "qcs404-evb.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. QCS404 EVB 4000";
+ compatible = "qcom,qcs404-evb";
+};
new file mode 100644
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, Linaro Limited
+
+#include "qcs404.dtsi"
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart2;
+ };
+
+ chosen {
+ stdout-path = "serial0";
+ };
+};
QCS404 has two EVBs, EVB-1000 and EVB-4000. These boards are mostly similar with few differences in the peripherals used. So use a common qcs404-evb.dtsi which contains the common parts and use qcs404-evb-1000.dts and qcs404-evb-4000.dts for diffs Signed-off-by: Vinod Koul <vkoul@kernel.org> --- arch/arm64/boot/dts/qcom/Makefile | 2 ++ arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts | 11 +++++++++++ arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts | 11 +++++++++++ arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 14 ++++++++++++++ 4 files changed, 38 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-1000.dts create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb-4000.dts create mode 100644 arch/arm64/boot/dts/qcom/qcs404-evb.dtsi -- 2.14.4