@@ -411,6 +411,7 @@ config ARCH_GEMINI
bool "Cortina Systems Gemini"
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
+ select NEED_MACH_GPIO_H
select CPU_FA526
help
Support for the Cortina Systems Gemini family SoCs
@@ -4,7 +4,7 @@
# Object file lists.
-obj-y := irq.o mm.o time.o devices.o gpio.o idle.o
+obj-y := irq.o mm.o time.o devices.o gpio.o idle.o reset.o
# Board-specific support
obj-$(CONFIG_MACH_NAS4220B) += board-nas4220b.o
@@ -103,4 +103,5 @@ MACHINE_START(NAS4220B, "Raidsonic NAS IB-4220-B")
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = ib4220b_init,
+ .restart = gemini_restart,
MACHINE_END
@@ -14,6 +14,7 @@
#include <linux/leds.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
+#include <linux/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -87,4 +88,5 @@ MACHINE_START(RUT100, "Teltonika RUT100")
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = rut1xx_init,
+ .restart = gemini_restart,
MACHINE_END
@@ -130,4 +130,5 @@ MACHINE_START(WBD111, "Wiliboard WBD-111")
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = wbd111_init,
+ .restart = gemini_restart,
MACHINE_END
@@ -130,4 +130,5 @@ MACHINE_START(WBD222, "Wiliboard WBD-222")
.init_irq = gemini_init_irq,
.init_time = gemini_timer_init,
.init_machine = wbd222_init,
+ .restart = gemini_restart,
MACHINE_END
@@ -26,4 +26,6 @@ extern int platform_register_pflash(unsigned int size,
struct mtd_partition *parts,
unsigned int nr_parts);
+extern void gemini_restart(char mode, const char *cmd);
+
#endif /* __GEMINI_COMMON_H__ */
@@ -21,6 +21,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <mach/gpio.h>
#define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x))
@@ -44,7 +45,7 @@
#define GPIO_PORT_NUM 3
-static void _set_gpio_irqenable(unsigned int base, unsigned int index,
+static void _set_gpio_irqenable(void __iomem *base, unsigned int index,
int enable)
{
unsigned int reg;
@@ -57,7 +58,7 @@ static void _set_gpio_irqenable(unsigned int base, unsigned int index,
static void gpio_ack_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
- unsigned int base = GPIO_BASE(gpio / 32);
+ void __iomem *base = GPIO_BASE(gpio / 32);
__raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR);
}
@@ -65,7 +66,7 @@ static void gpio_ack_irq(struct irq_data *d)
static void gpio_mask_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
- unsigned int base = GPIO_BASE(gpio / 32);
+ void __iomem *base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 0);
}
@@ -73,7 +74,7 @@ static void gpio_mask_irq(struct irq_data *d)
static void gpio_unmask_irq(struct irq_data *d)
{
unsigned int gpio = irq_to_gpio(d->irq);
- unsigned int base = GPIO_BASE(gpio / 32);
+ void __iomem *base = GPIO_BASE(gpio / 32);
_set_gpio_irqenable(base, gpio % 32, 1);
}
@@ -82,7 +83,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
{
unsigned int gpio = irq_to_gpio(d->irq);
unsigned int gpio_mask = 1 << (gpio % 32);
- unsigned int base = GPIO_BASE(gpio / 32);
+ void __iomem *base = GPIO_BASE(gpio / 32);
unsigned int reg_both, reg_level, reg_type;
reg_type = __raw_readl(base + GPIO_INT_TYPE);
@@ -120,7 +121,7 @@ static int gpio_set_irq_type(struct irq_data *d, unsigned int type)
__raw_writel(reg_level, base + GPIO_INT_LEVEL);
__raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE);
- gpio_ack_irq(d->irq);
+ gpio_ack_irq(d);
return 0;
}
@@ -153,7 +154,7 @@ static struct irq_chip gpio_irq_chip = {
static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
int dir)
{
- unsigned int base = GPIO_BASE(offset / 32);
+ void __iomem *base = GPIO_BASE(offset / 32);
unsigned int reg;
reg = __raw_readl(base + GPIO_DIR);
@@ -166,7 +167,7 @@ static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset,
static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
{
- unsigned int base = GPIO_BASE(offset / 32);
+ void __iomem *base = GPIO_BASE(offset / 32);
if (value)
__raw_writel(1 << (offset % 32), base + GPIO_DATA_SET);
@@ -176,7 +177,7 @@ static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset)
{
- unsigned int base = GPIO_BASE(offset / 32);
+ void __iomem *base = GPIO_BASE(offset / 32);
return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1;
}
@@ -69,6 +69,6 @@
/*
* macro to get at IO space when running virtually
*/
-#define IO_ADDRESS(x) ((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
+#define IO_ADDRESS(x) IOMEM((((x) & 0xFFF00000) >> 4) | ((x) & 0x000FFFFF) | 0xF0000000)
#endif
@@ -65,8 +65,8 @@ static struct irq_chip gemini_irq_chip = {
static struct resource irq_resource = {
.name = "irq_handler",
- .start = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
- .end = IO_ADDRESS(FIQ_STATUS(GEMINI_INTERRUPT_BASE)) + 4,
+ .start = GEMINI_INTERRUPT_BASE,
+ .end = FIQ_STATUS(GEMINI_INTERRUPT_BASE) + 4,
};
void __init gemini_init_irq(void)
@@ -19,57 +19,57 @@
/* Page table mapping for I/O region */
static struct map_desc gemini_io_desc[] __initdata = {
{
- .virtual = IO_ADDRESS(GEMINI_GLOBAL_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_GLOBAL_BASE),
.pfn =__phys_to_pfn(GEMINI_GLOBAL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_UART_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_UART_BASE),
.pfn = __phys_to_pfn(GEMINI_UART_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_TIMER_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_TIMER_BASE),
.pfn = __phys_to_pfn(GEMINI_TIMER_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_INTERRUPT_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_INTERRUPT_BASE),
.pfn = __phys_to_pfn(GEMINI_INTERRUPT_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_POWER_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_POWER_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(0)),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(0)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(0)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(1)),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(1)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(1)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_GPIO_BASE(2)),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_GPIO_BASE(2)),
.pfn = __phys_to_pfn(GEMINI_GPIO_BASE(2)),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_FLASH_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_FLASH_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_DRAM_CTRL_BASE),
.pfn = __phys_to_pfn(GEMINI_DRAM_CTRL_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
}, {
- .virtual = IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
+ .virtual = (unsigned long)IO_ADDRESS(GEMINI_GENERAL_DMA_BASE),
.pfn = __phys_to_pfn(GEMINI_GENERAL_DMA_BASE),
.length = SZ_512K,
.type = MT_DEVICE,
similarity index 91%
rename from arch/arm/mach-gemini/include/mach/system.h
rename to arch/arm/mach-gemini/reset.c
@@ -14,7 +14,7 @@
#include <mach/hardware.h>
#include <mach/global_reg.h>
-static inline void arch_reset(char mode, const char *cmd)
+void gemini_restart(char mode, const char *cmd)
{
__raw_writel(RESET_GLOBAL | RESET_CPU1,
IO_ADDRESS(GEMINI_GLOBAL_BASE) + GLOBAL_RESET);
There is no defconfig file for gemini, which has lead to a lot of bitrot. This makes the broken board files, the gpio implementation and the reset logic work again, and fixes the build warnings that got introduced with the changes to the readl/writel prototypes. Signed-off-by: Arnd Bergmann <arnd@arndb.de> --- arch/arm/Kconfig | 1 + arch/arm/mach-gemini/Makefile | 2 +- arch/arm/mach-gemini/board-nas4220b.c | 1 + arch/arm/mach-gemini/board-rut1xx.c | 2 ++ arch/arm/mach-gemini/board-wbd111.c | 1 + arch/arm/mach-gemini/board-wbd222.c | 1 + arch/arm/mach-gemini/common.h | 2 ++ arch/arm/mach-gemini/gpio.c | 19 ++++++++++--------- arch/arm/mach-gemini/include/mach/hardware.h | 2 +- arch/arm/mach-gemini/irq.c | 4 ++-- arch/arm/mach-gemini/mm.c | 22 +++++++++++----------- .../mach-gemini/{include/mach/system.h => reset.c} | 2 +- 12 files changed, 34 insertions(+), 25 deletions(-) rename arch/arm/mach-gemini/{include/mach/system.h => reset.c} (91%)