diff mbox

[v8,4/4] ARM: dts: Add FIMD DT binding Documentation

Message ID 1363676892-21296-5-git-send-email-vikas.sajjan@linaro.org
State New
Headers show

Commit Message

Vikas C Sajjan March 19, 2013, 7:08 a.m. UTC
Adds FIMD DT binding documentation for both Samsung SoC and Board, with an example

Signed-off-by: Vikas Sajjan <vikas.sajjan@linaro.org>
---
 .../devicetree/bindings/video/samsung-fimd.txt     |   61 ++++++++++++++++++++
 1 file changed, 61 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/samsung-fimd.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
new file mode 100644
index 0000000..d4b32d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
@@ -0,0 +1,61 @@ 
+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD stands for Fully Interactive Mobile Display, is the Display Controller for
+the Samsung series of SoCs which transfers the image data from a video buffer
+located in the system memory to an external LCD interface.
+
+Required properties:
+- compatible : value should be one of the following
+		"samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+		"samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+		"samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
+		"samsung,s5pc100-fimd"; /* for S5PC100 SoC  */
+		"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg : physical base address of the FIMD and length of memory mapped region
+
+- interrupt-parent : a phandle to the interrupt combiner node
+
+- interrupts : should contain a list of all FIMD IP block interrupts:
+  FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier format depends
+    on the interrupt controller used.
+
+- interrupt-names : should contain the interrupt names: "fifo", "vsync",
+	"lcd_sys", in the same order as they were listed in the interrupts
+        property.
+
+- pinctrl : property defining the pinctrl configurations with a phandle
+
+- pinctrl-names : "default" state needs to be specified in the fimd node
+		The pinctrl bindings defined in
+		../../../pinctrl/pinctrl-bindings.txt must be used to define a
+		pinctrl state named "default".
+
+Optional Properties:
+- samsung,power-domain := a phandle to FIMD power domain node
+
+Example:
+
+SoC specific DT Entry:
+
+	fimd@11c00000 {
+		compatible = "samsung,exynos4210-fimd";
+		interrupt-parent = <&combiner>;
+		reg = <0x11c00000 0x20000>;
+		interrupt-names = "fifo", "vsync", "lcd_sys";
+		interrupts = <11 0>, <11 1>, <11 2>;
+		clocks = <&clock 140>, <&clock 283>;
+		clock-names = "sclk_fimd", "fimd";
+		status = "disabled";
+	};
+
+Board specific DT Entry:
+
+	fimd@11c00000 {
+		samsung,power-domain = <&pd_lcd0>;
+		pinctrl-0 = <&lcd_sync &lcd_clk &lcd_en &lcd0_data &pwm1_out>;
+		pinctrl-names = "default";
+		status = "okay";
+	};