| Message ID | 20190125234509.26419-3-bjorn.andersson@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/7] clk: gcc-qcs404: Add PCIe resets | expand |
On 25-01-19, 15:45, Bjorn Andersson wrote: > The Qualcomm PCIe2 PHY is a Synopsys based PCIe PHY found in a number of > Qualcomm platforms, add a binding to describe this. > > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > .../bindings/phy/qcom-pcie2-phy.txt | 40 +++++++++++++++++++ > 1 file changed, 40 insertions(+) > create mode 100644 Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt > > diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt > new file mode 100644 > index 000000000000..7da02f9d78c7 > --- /dev/null > +++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt > @@ -0,0 +1,40 @@ > +Qualcomm PCIe2 PHY controller > +============================= > + > +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm > +platforms. > + > +Required properties: > + - compatible: compatible list, should be: > + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" > + > + - reg: offset and length of the PHY register set. > + - #phy-cells: must be 0. > + > + - clocks: a clock-specifier pair for the "pipe" clock > + > + - vdda-vp-supply: phandle to low voltage regulator > + - vdda-vph-supply: phandle to high voltage regulator > + > + - resets: reset-specifier pairs for the "phy" and "pipe" resets > + - reset-names: list of resets, should contain: > + "phy" and "pipe" > + > + - clock-output-names: name of the outgoing clock signal from the PHY PLL Should we specify the clk name here? > + > +Example: > + phy@7786000 { > + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; > + reg = <0x07786000 0xb8>; > + > + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; > + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, > + <&gcc GCC_PCIE_0_PIPE_ARES>; > + reset-names = "phy", "pipe"; > + > + vdda-vp-supply = <&vreg_l3_1p05>; > + vdda-vph-supply = <&vreg_l5_1p8>; > + > + clock-output-names = "pcie_0_pipe_clk"; > + #phy-cells = <0>; > + }; > -- > 2.18.0 -- ~Vinod
diff --git a/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt new file mode 100644 index 000000000000..7da02f9d78c7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt @@ -0,0 +1,40 @@ +Qualcomm PCIe2 PHY controller +============================= + +The Qualcomm PCIe2 PHY is a Synopsys based phy found in a number of Qualcomm +platforms. + +Required properties: + - compatible: compatible list, should be: + "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy" + + - reg: offset and length of the PHY register set. + - #phy-cells: must be 0. + + - clocks: a clock-specifier pair for the "pipe" clock + + - vdda-vp-supply: phandle to low voltage regulator + - vdda-vph-supply: phandle to high voltage regulator + + - resets: reset-specifier pairs for the "phy" and "pipe" resets + - reset-names: list of resets, should contain: + "phy" and "pipe" + + - clock-output-names: name of the outgoing clock signal from the PHY PLL + +Example: + phy@7786000 { + compatible = "qcom,qcs404-pcie2-phy", "qcom,pcie2-phy"; + reg = <0x07786000 0xb8>; + + clocks = <&gcc GCC_PCIE_0_PIPE_CLK>; + resets = <&gcc GCC_PCIEPHY_0_PHY_BCR>, + <&gcc GCC_PCIE_0_PIPE_ARES>; + reset-names = "phy", "pipe"; + + vdda-vp-supply = <&vreg_l3_1p05>; + vdda-vph-supply = <&vreg_l5_1p8>; + + clock-output-names = "pcie_0_pipe_clk"; + #phy-cells = <0>; + };
The Qualcomm PCIe2 PHY is a Synopsys based PCIe PHY found in a number of Qualcomm platforms, add a binding to describe this. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- .../bindings/phy/qcom-pcie2-phy.txt | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-pcie2-phy.txt -- 2.18.0