diff mbox series

kvm: arm64: Relax the restriction on using stage2 PUD huge mapping

Message ID 1548789137-4446-1-git-send-email-suzuki.poulose@arm.com
State Accepted
Commit 280cebfd05c8e381a392c662006dfaa6377feefc
Headers show
Series kvm: arm64: Relax the restriction on using stage2 PUD huge mapping | expand

Commit Message

Suzuki K Poulose Jan. 29, 2019, 7:12 p.m. UTC
We restrict mapping the PUD huge pages in stage2 to only when the
stage2 has 4 level page table, leaving the feature unused with
the default IPA size. But we could use it even with a 3
level page table, i.e, when the PUD level is folded into PGD,
just like the stage1. Relax the condition to allow using the
PUD huge page mappings at stage2 when it is possible.

Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

---
 virt/kvm/arm/mmu.c | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

-- 
2.7.4

Comments

Marc Zyngier Jan. 30, 2019, 10:21 a.m. UTC | #1
On 29/01/2019 19:12, Suzuki K Poulose wrote:
> We restrict mapping the PUD huge pages in stage2 to only when the

> stage2 has 4 level page table, leaving the feature unused with

> the default IPA size. But we could use it even with a 3

> level page table, i.e, when the PUD level is folded into PGD,

> just like the stage1. Relax the condition to allow using the

> PUD huge page mappings at stage2 when it is possible.

> 

> Cc: Christoffer Dall <christoffer.dall@arm.com>

> Cc: Marc Zyngier <marc.zyngier@arm.com>

> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

> ---

>  virt/kvm/arm/mmu.c | 9 ++++++---

>  1 file changed, 6 insertions(+), 3 deletions(-)

> 

> diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c

> index fbdf3ac..30251e2 100644

> --- a/virt/kvm/arm/mmu.c

> +++ b/virt/kvm/arm/mmu.c

> @@ -1695,11 +1695,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,

>  

>  	vma_pagesize = vma_kernel_pagesize(vma);

>  	/*

> -	 * PUD level may not exist for a VM but PMD is guaranteed to

> -	 * exist.

> +	 * The stage2 has a minimum of 2 level table (For arm64 see

> +	 * kvm_arm_setup_stage2()). Hence, we are guaranteed that we can

> +	 * use PMD_SIZE huge mappings (even when the PMD is folded into PGD).

> +	 * As for PUD huge maps, we must make sure that we have at least

> +	 * 3 levels, i.e, PMD is not folded.

>  	 */

>  	if ((vma_pagesize == PMD_SIZE ||

> -	     (vma_pagesize == PUD_SIZE && kvm_stage2_has_pud(kvm))) &&

> +	     (vma_pagesize == PUD_SIZE && kvm_stage2_has_pmd(kvm))) &&

>  	    !force_pte) {

>  		gfn = (fault_ipa & huge_page_mask(hstate_vma(vma))) >> PAGE_SHIFT;

>  	}

> 


For the record, it took a 10 minute discussion with Suzuki  to
understand that the above is actually correct, even if massively
confusing. Why is it correct:

- In a 4 level stage-2, each of PGD/PUD/PMD exists on its own, and start
level is 0
- In a 3 level stage-2, PGD and PUD are fused as the start level is 1,
and PMD exists on its own
- In a 2 level stage-2, both PGD, PUD and PMD are fused, and start level
is 2.

From the above, we can extract that you can always have a block mapping
at the PUD level if you have a standalone PMD, and that's the logic this
patch is using.

Now, the *real* reason is that you can map a given size in your S2PT,
not that some level is fused or not. What we want is probably a helper
that says:

bool kvm_stage2_can_map_block_size(struct kvm *kvm, size_t sz)
{
	return sz >= PMD_SIZE && stage2_pgdir_size(kvm) >= sz);
}

and the above becomes:

if (kvm_stage2_can_map_block_size(kvm, vma_pagesize)) && !force_pte)

which I find much nicer.

I guess I can still take the above as a fix if Christoffer is happy with
it, but if you think my above hack is correct, I'd like things to be
cleaned-up in the near future.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...
Suzuki K Poulose Jan. 30, 2019, 10:39 a.m. UTC | #2
Marc,

On 30/01/2019 10:21, Marc Zyngier wrote:
> On 29/01/2019 19:12, Suzuki K Poulose wrote:

>> We restrict mapping the PUD huge pages in stage2 to only when the

>> stage2 has 4 level page table, leaving the feature unused with

>> the default IPA size. But we could use it even with a 3

>> level page table, i.e, when the PUD level is folded into PGD,

>> just like the stage1. Relax the condition to allow using the

>> PUD huge page mappings at stage2 when it is possible.

>>

>> Cc: Christoffer Dall <christoffer.dall@arm.com>

>> Cc: Marc Zyngier <marc.zyngier@arm.com>

>> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>

>> ---

>>   virt/kvm/arm/mmu.c | 9 ++++++---

>>   1 file changed, 6 insertions(+), 3 deletions(-)

>>

>> diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c

>> index fbdf3ac..30251e2 100644

>> --- a/virt/kvm/arm/mmu.c

>> +++ b/virt/kvm/arm/mmu.c

>> @@ -1695,11 +1695,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,

>>   

>>   	vma_pagesize = vma_kernel_pagesize(vma);

>>   	/*

>> -	 * PUD level may not exist for a VM but PMD is guaranteed to

>> -	 * exist.

>> +	 * The stage2 has a minimum of 2 level table (For arm64 see

>> +	 * kvm_arm_setup_stage2()). Hence, we are guaranteed that we can

>> +	 * use PMD_SIZE huge mappings (even when the PMD is folded into PGD).

>> +	 * As for PUD huge maps, we must make sure that we have at least

>> +	 * 3 levels, i.e, PMD is not folded.

>>   	 */

>>   	if ((vma_pagesize == PMD_SIZE ||

>> -	     (vma_pagesize == PUD_SIZE && kvm_stage2_has_pud(kvm))) &&

>> +	     (vma_pagesize == PUD_SIZE && kvm_stage2_has_pmd(kvm))) &&

>>   	    !force_pte) {

>>   		gfn = (fault_ipa & huge_page_mask(hstate_vma(vma))) >> PAGE_SHIFT;

>>   	}

>>

> 

> For the record, it took a 10 minute discussion with Suzuki  to

> understand that the above is actually correct, even if massively

> confusing. Why is it correct:

> 

> - In a 4 level stage-2, each of PGD/PUD/PMD exists on its own, and start

> level is 0

> - In a 3 level stage-2, PGD and PUD are fused as the start level is 1,

> and PMD exists on its own

> - In a 2 level stage-2, both PGD, PUD and PMD are fused, and start level

> is 2.

> 

>  From the above, we can extract that you can always have a block mapping

> at the PUD level if you have a standalone PMD, and that's the logic this

> patch is using.


Thanks for writing it up ! :-)

> 

> Now, the *real* reason is that you can map a given size in your S2PT,

> not that some level is fused or not. What we want is probably a helper

> that says:

> 

> bool kvm_stage2_can_map_block_size(struct kvm *kvm, size_t sz)

> {

> 	return sz >= PMD_SIZE && stage2_pgdir_size(kvm) >= sz);

> }

> 

> and the above becomes:

> 

> if (kvm_stage2_can_map_block_size(kvm, vma_pagesize)) && !force_pte)

> 

> which I find much nicer.

> 

> I guess I can still take the above as a fix if Christoffer is happy with

> it, but if you think my above hack is correct, I'd like things to be

> cleaned-up in the near future.


Sure, as we discussed that makes it much simpler and generic. I could
address that.

Suzuki
diff mbox series

Patch

diff --git a/virt/kvm/arm/mmu.c b/virt/kvm/arm/mmu.c
index fbdf3ac..30251e2 100644
--- a/virt/kvm/arm/mmu.c
+++ b/virt/kvm/arm/mmu.c
@@ -1695,11 +1695,14 @@  static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 
 	vma_pagesize = vma_kernel_pagesize(vma);
 	/*
-	 * PUD level may not exist for a VM but PMD is guaranteed to
-	 * exist.
+	 * The stage2 has a minimum of 2 level table (For arm64 see
+	 * kvm_arm_setup_stage2()). Hence, we are guaranteed that we can
+	 * use PMD_SIZE huge mappings (even when the PMD is folded into PGD).
+	 * As for PUD huge maps, we must make sure that we have at least
+	 * 3 levels, i.e, PMD is not folded.
 	 */
 	if ((vma_pagesize == PMD_SIZE ||
-	     (vma_pagesize == PUD_SIZE && kvm_stage2_has_pud(kvm))) &&
+	     (vma_pagesize == PUD_SIZE && kvm_stage2_has_pmd(kvm))) &&
 	    !force_pte) {
 		gfn = (fault_ipa & huge_page_mask(hstate_vma(vma))) >> PAGE_SHIFT;
 	}