@@ -95,31 +95,6 @@ enum {
.intr_detection_width = -1, \
}
-#define UFS_RESET(pg_name, offset) \
- { \
- .name = #pg_name, \
- .pins = pg_name##_pins, \
- .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
- .ctl_reg = offset, \
- .io_reg = offset + 0x4, \
- .intr_cfg_reg = 0, \
- .intr_status_reg = 0, \
- .intr_target_reg = 0, \
- .tile = NORTH, \
- .mux_bit = -1, \
- .pull_bit = 3, \
- .drv_bit = 0, \
- .oe_bit = -1, \
- .in_bit = -1, \
- .out_bit = 0, \
- .intr_enable_bit = -1, \
- .intr_status_bit = -1, \
- .intr_target_bit = -1, \
- .intr_raw_status_bit = -1, \
- .intr_polarity_bit = -1, \
- .intr_detection_bit = -1, \
- .intr_detection_width = -1, \
- }
static const struct pinctrl_pin_desc qcs404_pins[] = {
PINCTRL_PIN(0, "GPIO_0"),
PINCTRL_PIN(1, "GPIO_1"),
The UFS_RESET macro serves no purpose on QCS404, remove it. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- drivers/pinctrl/qcom/pinctrl-qcs404.c | 25 ------------------------- 1 file changed, 25 deletions(-) -- 2.18.0