diff mbox

[V3,5/7] ARM: dts: Add vmmc regulator support for Arndale board

Message ID 1364890507-19261-6-git-send-email-tushar.behera@linaro.org
State Accepted
Headers show

Commit Message

Tushar Behera April 2, 2013, 8:15 a.m. UTC
From: Sachin Kamat <sachin.kamat@linaro.org>

Added vmmc regulator node to Arndale DT file.

Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
Changes for V3:
* Pin-control related modifications.

 arch/arm/boot/dts/exynos5250-arndale.dts |   11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox

Patch

diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 7c3f54b..e7fa72c 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -322,6 +322,7 @@ 
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
 
@@ -343,6 +344,7 @@ 
 		samsung,dw-mshc-ciu-div = <3>;
 		samsung,dw-mshc-sdr-timing = <2 3>;
 		samsung,dw-mshc-ddr-timing = <1 2>;
+		vmmc-supply = <&mmc_reg>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
 
@@ -421,4 +423,13 @@ 
 			gpio-key,wakeup;
 		};
 	};
+
+	mmc_reg: voltage-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_33ON_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpx1 1 1>;
+		enable-active-high;
+	};
 };