diff mbox

[2/3,V5] S5P: Rename GPIO definitions

Message ID 1364990064-30688-3-git-send-email-rajeshwari.s@samsung.com
State New
Headers show

Commit Message

Rajeshwari Shinde April 3, 2013, 11:54 a.m. UTC 
This patch rename GPIO definitions from GPIO_... to S5P_GPIO_...
This changes was done to enable cmd_gpio for EXYNOS and
cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence
getting a error during compilation.

Build tested for s5p_goni, origen, smdk5250, s5pc210_universal,
trats, smdkc100, smdkv310 config files.

Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>
---
Changes in V2:
        - New patch
Changes in V3:
	- Created a table to know the base address of input bank.
Changes in V4:
	- Moved the function name_to_gpio to s5p gpio driver and 
	renamed to s5p_name_to_gpio.
Changes in V5:
	- Rebased on latest u-boot-samsung tree
 arch/arm/cpu/armv7/exynos/pinmux.c       |  134 +++++++++++++++---------------
 arch/arm/include/asm/arch-exynos/gpio.h  |   26 +++---
 arch/arm/include/asm/arch-s5pc1xx/gpio.h |   26 +++---
 board/samsung/goni/goni.c                |    4 +-
 board/samsung/origen/origen.c            |    8 +-
 board/samsung/smdk5250/smdk5250.c        |    8 +-
 board/samsung/smdkc100/smdkc100.c        |    2 +-
 board/samsung/smdkv310/smdkv310.c        |   10 +-
 board/samsung/trats/trats.c              |   17 ++--
 board/samsung/universal_c210/universal.c |   36 ++++----
 drivers/gpio/s5p_gpio.c                  |   20 ++--
 11 files changed, 146 insertions(+), 145 deletions(-)

Comments

Simon Glass May 11, 2013, 6:40 p.m. UTC | #1 
On Wed, Apr 3, 2013 at 5:54 AM, Rajeshwari Shinde
<rajeshwari.s@samsung.com> wrote:
> This patch rename GPIO definitions from GPIO_... to S5P_GPIO_...
> This changes was done to enable cmd_gpio for EXYNOS and
> cmd_gpio has GPIO_INPUT same as s5p_gpio driver and hence
> getting a error during compilation.
>
> Build tested for s5p_goni, origen, smdk5250, s5pc210_universal,
> trats, smdkc100, smdkv310 config files.
>
> Signed-off-by: Rajeshwari Shinde <rajeshwari.s@samsung.com>

Still looks good to me. Hope you can arrange the ordering to land this soon.

> ---
> Changes in V2:
>         - New patch
> Changes in V3:
>         - Created a table to know the base address of input bank.
> Changes in V4:
>         - Moved the function name_to_gpio to s5p gpio driver and
>         renamed to s5p_name_to_gpio.
> Changes in V5:
>         - Rebased on latest u-boot-samsung tree
>  arch/arm/cpu/armv7/exynos/pinmux.c       |  134 +++++++++++++++---------------
>  arch/arm/include/asm/arch-exynos/gpio.h  |   26 +++---
>  arch/arm/include/asm/arch-s5pc1xx/gpio.h |   26 +++---
>  board/samsung/goni/goni.c                |    4 +-
>  board/samsung/origen/origen.c            |    8 +-
>  board/samsung/smdk5250/smdk5250.c        |    8 +-
>  board/samsung/smdkc100/smdkc100.c        |    2 +-
>  board/samsung/smdkv310/smdkv310.c        |   10 +-
>  board/samsung/trats/trats.c              |   17 ++--
>  board/samsung/universal_c210/universal.c |   36 ++++----
>  drivers/gpio/s5p_gpio.c                  |   20 ++--
>  11 files changed, 146 insertions(+), 145 deletions(-)
diff mbox

Patch

diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c
index 2fb5963..d70980b 100644
--- a/arch/arm/cpu/armv7/exynos/pinmux.c
+++ b/arch/arm/cpu/armv7/exynos/pinmux.c
@@ -50,8 +50,8 @@  static void exynos5_uart_config(int peripheral)
 		break;
 	}
 	for (i = start; i < start + count; i++) {
-		gpio_set_pull(i, GPIO_PULL_NONE);
-		gpio_cfg_pin(i, GPIO_FUNC(0x2));
+		gpio_set_pull(i, S5P_GPIO_PULL_NONE);
+		gpio_cfg_pin(i, S5P_GPIO_FUNC(0x2));
 	}
 }
 
@@ -63,7 +63,7 @@  static int exynos5_mmc_config(int peripheral, int flags)
 	case PERIPH_ID_SDMMC0:
 		start = EXYNOS5_GPIO_C00;
 		start_ext = EXYNOS5_GPIO_C10;
-		gpio_func = GPIO_FUNC(0x2);
+		gpio_func = S5P_GPIO_FUNC(0x2);
 		break;
 	case PERIPH_ID_SDMMC1:
 		start = EXYNOS5_GPIO_C20;
@@ -72,7 +72,7 @@  static int exynos5_mmc_config(int peripheral, int flags)
 	case PERIPH_ID_SDMMC2:
 		start = EXYNOS5_GPIO_C30;
 		start_ext = EXYNOS5_GPIO_C43;
-		gpio_func = GPIO_FUNC(0x3);
+		gpio_func = S5P_GPIO_FUNC(0x3);
 		break;
 	case PERIPH_ID_SDMMC3:
 		start = EXYNOS5_GPIO_C40;
@@ -87,19 +87,19 @@  static int exynos5_mmc_config(int peripheral, int flags)
 	if (flags & PINMUX_FLAG_8BIT_MODE) {
 		for (i = start_ext; i <= (start_ext + 3); i++) {
 			gpio_cfg_pin(i, gpio_func);
-			gpio_set_pull(i, GPIO_PULL_UP);
-			gpio_set_drv(i, GPIO_DRV_4X);
+			gpio_set_pull(i, S5P_GPIO_PULL_UP);
+			gpio_set_drv(i, S5P_GPIO_DRV_4X);
 		}
 	}
 	for (i = 0; i < 2; i++) {
-		gpio_cfg_pin(start + i, GPIO_FUNC(0x2));
-		gpio_set_pull(start + i, GPIO_PULL_NONE);
-		gpio_set_drv(start + i, GPIO_DRV_4X);
+		gpio_cfg_pin(start + i, S5P_GPIO_FUNC(0x2));
+		gpio_set_pull(start + i, S5P_GPIO_PULL_NONE);
+		gpio_set_drv(start + i, S5P_GPIO_DRV_4X);
 	}
 	for (i = 3; i <= 6; i++) {
-		gpio_cfg_pin(start + i, GPIO_FUNC(0x2));
-		gpio_set_pull(start + i, GPIO_PULL_UP);
-		gpio_set_drv(start + i, GPIO_DRV_4X);
+		gpio_cfg_pin(start + i, S5P_GPIO_FUNC(0x2));
+		gpio_set_pull(start + i, S5P_GPIO_PULL_UP);
+		gpio_set_drv(start + i, S5P_GPIO_DRV_4X);
 	}
 
 	return 0;
@@ -125,12 +125,12 @@  static void exynos5_sromc_config(int flags)
 	 * GPY1[3]	EBI_DATA_RDn(2)
 	 */
 	gpio_cfg_pin(EXYNOS5_GPIO_Y00 + (flags & PINMUX_FLAG_BANK),
-		     GPIO_FUNC(2));
-	gpio_cfg_pin(EXYNOS5_GPIO_Y04, GPIO_FUNC(2));
-	gpio_cfg_pin(EXYNOS5_GPIO_Y05, GPIO_FUNC(2));
+		     S5P_GPIO_FUNC(2));
+	gpio_cfg_pin(EXYNOS5_GPIO_Y04, S5P_GPIO_FUNC(2));
+	gpio_cfg_pin(EXYNOS5_GPIO_Y05, S5P_GPIO_FUNC(2));
 
 	for (i = 0; i < 4; i++)
-		gpio_cfg_pin(EXYNOS5_GPIO_Y10 + i, GPIO_FUNC(2));
+		gpio_cfg_pin(EXYNOS5_GPIO_Y10 + i, S5P_GPIO_FUNC(2));
 
 	/*
 	 * EBI: 8 Addrss Lines
@@ -165,14 +165,14 @@  static void exynos5_sromc_config(int flags)
 	 * GPY6[7]	EBI_DATA[15](2)
 	 */
 	for (i = 0; i < 8; i++) {
-		gpio_cfg_pin(EXYNOS5_GPIO_Y30 + i, GPIO_FUNC(2));
-		gpio_set_pull(EXYNOS5_GPIO_Y30 + i, GPIO_PULL_UP);
+		gpio_cfg_pin(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_FUNC(2));
+		gpio_set_pull(EXYNOS5_GPIO_Y30 + i, S5P_GPIO_PULL_UP);
 
-		gpio_cfg_pin(EXYNOS5_GPIO_Y50 + i, GPIO_FUNC(2));
-		gpio_set_pull(EXYNOS5_GPIO_Y50 + i, GPIO_PULL_UP);
+		gpio_cfg_pin(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_FUNC(2));
+		gpio_set_pull(EXYNOS5_GPIO_Y50 + i, S5P_GPIO_PULL_UP);
 
-		gpio_cfg_pin(EXYNOS5_GPIO_Y60 + i, GPIO_FUNC(2));
-		gpio_set_pull(EXYNOS5_GPIO_Y60 + i, GPIO_PULL_UP);
+		gpio_cfg_pin(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_FUNC(2));
+		gpio_set_pull(EXYNOS5_GPIO_Y60 + i, S5P_GPIO_PULL_UP);
 	}
 }
 
@@ -181,36 +181,36 @@  static void exynos5_i2c_config(int peripheral, int flags)
 
 	switch (peripheral) {
 	case PERIPH_ID_I2C0:
-		gpio_cfg_pin(EXYNOS5_GPIO_B30, GPIO_FUNC(0x2));
-		gpio_cfg_pin(EXYNOS5_GPIO_B31, GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5_GPIO_B30, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5_GPIO_B31, S5P_GPIO_FUNC(0x2));
 		break;
 	case PERIPH_ID_I2C1:
-		gpio_cfg_pin(EXYNOS5_GPIO_B32, GPIO_FUNC(0x2));
-		gpio_cfg_pin(EXYNOS5_GPIO_B33, GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5_GPIO_B32, S5P_GPIO_FUNC(0x2));
+		gpio_cfg_pin(EXYNOS5_GPIO_B33, S5P_GPIO_FUNC(0x2));
 		break;
 	case PERIPH_ID_I2C2:
-		gpio_cfg_pin(EXYNOS5_GPIO_A06, GPIO_FUNC(0x3));
-		gpio_cfg_pin(EXYNOS5_GPIO_A07, GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A06, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A07, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C3:
-		gpio_cfg_pin(EXYNOS5_GPIO_A12, GPIO_FUNC(0x3));
-		gpio_cfg_pin(EXYNOS5_GPIO_A13, GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A12, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A13, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C4:
-		gpio_cfg_pin(EXYNOS5_GPIO_A20, GPIO_FUNC(0x3));
-		gpio_cfg_pin(EXYNOS5_GPIO_A21, GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A20, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A21, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C5:
-		gpio_cfg_pin(EXYNOS5_GPIO_A22, GPIO_FUNC(0x3));
-		gpio_cfg_pin(EXYNOS5_GPIO_A23, GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A22, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_A23, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C6:
-		gpio_cfg_pin(EXYNOS5_GPIO_B13, GPIO_FUNC(0x4));
-		gpio_cfg_pin(EXYNOS5_GPIO_B14, GPIO_FUNC(0x4));
+		gpio_cfg_pin(EXYNOS5_GPIO_B13, S5P_GPIO_FUNC(0x4));
+		gpio_cfg_pin(EXYNOS5_GPIO_B14, S5P_GPIO_FUNC(0x4));
 		break;
 	case PERIPH_ID_I2C7:
-		gpio_cfg_pin(EXYNOS5_GPIO_B22, GPIO_FUNC(0x3));
-		gpio_cfg_pin(EXYNOS5_GPIO_B23, GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_B22, S5P_GPIO_FUNC(0x3));
+		gpio_cfg_pin(EXYNOS5_GPIO_B23, S5P_GPIO_FUNC(0x3));
 		break;
 	}
 }
@@ -220,7 +220,7 @@  static void exynos5_i2s_config(int peripheral)
 	int i;
 
 	for (i = 0; i < 5; i++)
-		gpio_cfg_pin(EXYNOS5_GPIO_B00+i, GPIO_FUNC(0x02));
+		gpio_cfg_pin(EXYNOS5_GPIO_B00+i, S5P_GPIO_FUNC(0x02));
 }
 
 void exynos5_spi_config(int peripheral)
@@ -229,25 +229,25 @@  void exynos5_spi_config(int peripheral)
 
 	switch (peripheral) {
 	case PERIPH_ID_SPI0:
-		cfg = GPIO_FUNC(0x2);
+		cfg = S5P_GPIO_FUNC(0x2);
 		pin = EXYNOS5_GPIO_A20;
 		break;
 	case PERIPH_ID_SPI1:
-		cfg = GPIO_FUNC(0x2);
+		cfg = S5P_GPIO_FUNC(0x2);
 		pin = EXYNOS5_GPIO_A24;
 		break;
 	case PERIPH_ID_SPI2:
-		cfg = GPIO_FUNC(0x5);
+		cfg = S5P_GPIO_FUNC(0x5);
 		pin = EXYNOS5_GPIO_B11;
 		break;
 	case PERIPH_ID_SPI3:
-		cfg = GPIO_FUNC(0x2);
+		cfg = S5P_GPIO_FUNC(0x2);
 		pin = EXYNOS5_GPIO_F10;
 		break;
 	case PERIPH_ID_SPI4:
 		for (i = 0; i < 2; i++) {
-			gpio_cfg_pin(EXYNOS5_GPIO_F02 + i, GPIO_FUNC(0x4));
-			gpio_cfg_pin(EXYNOS5_GPIO_E04 + i, GPIO_FUNC(0x4));
+			gpio_cfg_pin(EXYNOS5_GPIO_F02 + i, S5P_GPIO_FUNC(0x4));
+			gpio_cfg_pin(EXYNOS5_GPIO_E04 + i, S5P_GPIO_FUNC(0x4));
 		}
 		break;
 	}
@@ -309,36 +309,36 @@  static void exynos4_i2c_config(int peripheral, int flags)
 
 	switch (peripheral) {
 	case PERIPH_ID_I2C0:
-		s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2));
-		s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 0, S5P_GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 1, S5P_GPIO_FUNC(0x2));
 		break;
 	case PERIPH_ID_I2C1:
-		s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2));
-		s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 2, S5P_GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio1->d1, 3, S5P_GPIO_FUNC(0x2));
 		break;
 	case PERIPH_ID_I2C2:
-		s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a0, 6, S5P_GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a0, 7, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C3:
-		s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a1, 2, S5P_GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->a1, 3, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C4:
-		s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 2, S5P_GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 3, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C5:
-		s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 6, S5P_GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->b, 7, S5P_GPIO_FUNC(0x3));
 		break;
 	case PERIPH_ID_I2C6:
-		s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4));
-		s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4));
+		s5p_gpio_cfg_pin(&gpio1->c1, 3, S5P_GPIO_FUNC(0x4));
+		s5p_gpio_cfg_pin(&gpio1->c1, 4, S5P_GPIO_FUNC(0x4));
 		break;
 	case PERIPH_ID_I2C7:
-		s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3));
-		s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->d0, 2, S5P_GPIO_FUNC(0x3));
+		s5p_gpio_cfg_pin(&gpio1->d0, 3, S5P_GPIO_FUNC(0x3));
 		break;
 	}
 }
@@ -365,15 +365,15 @@  static int exynos4_mmc_config(int peripheral, int flags)
 	for (i = 0; i < 7; i++) {
 		if (i == 2)
 			continue;
-		s5p_gpio_cfg_pin(bank, i,  GPIO_FUNC(0x2));
-		s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
-		s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
+		s5p_gpio_cfg_pin(bank, i,  S5P_GPIO_FUNC(0x2));
+		s5p_gpio_set_pull(bank, i, S5P_GPIO_PULL_NONE);
+		s5p_gpio_set_drv(bank, i, S5P_GPIO_DRV_4X);
 	}
 	if (flags & PINMUX_FLAG_8BIT_MODE) {
 		for (i = 3; i < 7; i++) {
-			s5p_gpio_cfg_pin(bank_ext, i,  GPIO_FUNC(0x3));
-			s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
-			s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
+			s5p_gpio_cfg_pin(bank_ext, i,  S5P_GPIO_FUNC(0x3));
+			s5p_gpio_set_pull(bank_ext, i, S5P_GPIO_PULL_NONE);
+			s5p_gpio_set_drv(bank_ext, i, S5P_GPIO_DRV_4X);
 		}
 	}
 
diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h
index 20eb459..d8000af 100644
--- a/arch/arm/include/asm/arch-exynos/gpio.h
+++ b/arch/arm/include/asm/arch-exynos/gpio.h
@@ -668,21 +668,21 @@  int gpio_set_value(unsigned gpio, int value);
 #endif
 
 /* Pin configurations */
-#define GPIO_INPUT	0x0
-#define GPIO_OUTPUT	0x1
-#define GPIO_IRQ	0xf
-#define GPIO_FUNC(x)	(x)
+#define S5P_GPIO_INPUT	0x0
+#define S5P_GPIO_OUTPUT	0x1
+#define S5P_GPIO_IRQ	0xf
+#define S5P_GPIO_FUNC(x)	(x)
 
 /* Pull mode */
-#define GPIO_PULL_NONE	0x0
-#define GPIO_PULL_DOWN	0x1
-#define GPIO_PULL_UP	0x3
+#define S5P_GPIO_PULL_NONE	0x0
+#define S5P_GPIO_PULL_DOWN	0x1
+#define S5P_GPIO_PULL_UP	0x3
 
 /* Drive Strength level */
-#define GPIO_DRV_1X	0x0
-#define GPIO_DRV_3X	0x1
-#define GPIO_DRV_2X	0x2
-#define GPIO_DRV_4X	0x3
-#define GPIO_DRV_FAST	0x0
-#define GPIO_DRV_SLOW	0x1
+#define S5P_GPIO_DRV_1X	0x0
+#define S5P_GPIO_DRV_3X	0x1
+#define S5P_GPIO_DRV_2X	0x2
+#define S5P_GPIO_DRV_4X	0x3
+#define S5P_GPIO_DRV_FAST	0x0
+#define S5P_GPIO_DRV_SLOW	0x1
 #endif
diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
index 00e498d..e0605a2 100644
--- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h
+++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h
@@ -155,22 +155,22 @@  static inline unsigned int s5p_gpio_part_max(int nr)
 #endif
 
 /* Pin configurations */
-#define GPIO_INPUT	0x0
-#define GPIO_OUTPUT	0x1
-#define GPIO_IRQ	0xf
-#define GPIO_FUNC(x)	(x)
+#define S5P_GPIO_INPUT	0x0
+#define S5P_GPIO_OUTPUT	0x1
+#define S5P_GPIO_IRQ	0xf
+#define S5P_GPIO_FUNC(x)	(x)
 
 /* Pull mode */
-#define GPIO_PULL_NONE	0x0
-#define GPIO_PULL_DOWN	0x1
-#define GPIO_PULL_UP	0x2
+#define S5P_GPIO_PULL_NONE	0x0
+#define S5P_GPIO_PULL_DOWN	0x1
+#define S5P_GPIO_PULL_UP	0x2
 
 /* Drive Strength level */
-#define GPIO_DRV_1X	0x0
-#define GPIO_DRV_3X	0x1
-#define GPIO_DRV_2X	0x2
-#define GPIO_DRV_4X	0x3
-#define GPIO_DRV_FAST	0x0
-#define GPIO_DRV_SLOW	0x1
+#define S5P_GPIO_DRV_1X	0x0
+#define S5P_GPIO_DRV_3X	0x1
+#define S5P_GPIO_DRV_2X	0x2
+#define S5P_GPIO_DRV_4X	0x3
+#define S5P_GPIO_DRV_FAST	0x0
+#define S5P_GPIO_DRV_SLOW	0x1
 
 #endif
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index ff76963..daa0faa 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -102,9 +102,9 @@  int board_mmc_init(bd_t *bis)
 		/* GPG0[0:6] special function 2 */
 		s5p_gpio_cfg_pin(&s5pc110_gpio->g0, i, 0x2);
 		/* GPG0[0:6] pull disable */
-		s5p_gpio_set_pull(&s5pc110_gpio->g0, i, GPIO_PULL_NONE);
+		s5p_gpio_set_pull(&s5pc110_gpio->g0, i, S5P_GPIO_PULL_NONE);
 		/* GPG0[0:6] drv 4x */
-		s5p_gpio_set_drv(&s5pc110_gpio->g0, i, GPIO_DRV_4X);
+		s5p_gpio_set_drv(&s5pc110_gpio->g0, i, S5P_GPIO_DRV_4X);
 	}
 
 	return s5p_mmc_init(0, 4);
diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c
index 638e7b1..1c82ac6 100644
--- a/board/samsung/origen/origen.c
+++ b/board/samsung/origen/origen.c
@@ -88,19 +88,19 @@  int board_mmc_init(bd_t *bis)
 	 */
 	for (i = 0; i < 7; i++) {
 		/* GPK2[0:6] special function 2 */
-		s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio2->k2, i, S5P_GPIO_FUNC(0x2));
 
 		/* GPK2[0:6] drv 4x */
-		s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+		s5p_gpio_set_drv(&gpio2->k2, i, S5P_GPIO_DRV_4X);
 
 		/* GPK2[0:1] pull disable */
 		if (i == 0 || i == 1) {
-			s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+			s5p_gpio_set_pull(&gpio2->k2, i, S5P_GPIO_PULL_NONE);
 			continue;
 		}
 
 		/* GPK2[2:6] pull up */
-		s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+		s5p_gpio_set_pull(&gpio2->k2, i, S5P_GPIO_PULL_UP);
 	}
 
 	err = s5p_mmc_init(2, 4);
diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c
index 4b5b558..d7add44 100644
--- a/board/samsung/smdk5250/smdk5250.c
+++ b/board/samsung/smdk5250/smdk5250.c
@@ -88,7 +88,7 @@  static void  board_enable_audio_codec(void)
 {
 	/* Enable MAX98095 Codec */
 	gpio_direction_output(EXYNOS5_GPIO_X17, 1);
-	gpio_set_pull(EXYNOS5_GPIO_X17, GPIO_PULL_NONE);
+	gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
 }
 #endif
 
@@ -453,15 +453,15 @@  void exynos_cfg_lcd_gpio(void)
 {
 
 	/* For Backlight */
-	gpio_cfg_pin(EXYNOS5_GPIO_B20, GPIO_OUTPUT);
+	gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
 	gpio_set_value(EXYNOS5_GPIO_B20, 1);
 
 	/* LCD power on */
-	gpio_cfg_pin(EXYNOS5_GPIO_X15, GPIO_OUTPUT);
+	gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
 	gpio_set_value(EXYNOS5_GPIO_X15, 1);
 
 	/* Set Hotplug detect for DP */
-	gpio_cfg_pin(EXYNOS5_GPIO_X07, GPIO_FUNC(0x3));
+	gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
 }
 
 void exynos_set_dp_phy(unsigned int onoff)
diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c
index c41e610..87a8f5a 100644
--- a/board/samsung/smdkc100/smdkc100.c
+++ b/board/samsung/smdkc100/smdkc100.c
@@ -41,7 +41,7 @@  static void smc9115_pre_init(void)
 		(struct s5pc100_gpio *)samsung_get_base_gpio();
 
 	/* gpio configuration GPK0CON */
-	s5p_gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+	s5p_gpio_cfg_pin(&gpio->k0, CONFIG_ENV_SROM_BANK, S5P_GPIO_FUNC(2));
 
 	/* Ethernet needs bus width of 16 bits */
 	smc_bw_conf = SMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c
index 81ac8f6..24e8f18 100644
--- a/board/samsung/smdkv310/smdkv310.c
+++ b/board/samsung/smdkv310/smdkv310.c
@@ -37,7 +37,7 @@  static void smc9115_pre_init(void)
 	u32 smc_bw_conf, smc_bc_conf;
 
 	/* gpio configuration GPK0CON */
-	s5p_gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, GPIO_FUNC(2));
+	s5p_gpio_cfg_pin(&gpio2->y0, CONFIG_ENV_SROM_BANK, S5P_GPIO_FUNC(2));
 
 	/* Ethernet needs bus width of 16 bits */
 	smc_bw_conf = SROMC_DATA16_WIDTH(CONFIG_ENV_SROM_BANK);
@@ -119,19 +119,19 @@  int board_mmc_init(bd_t *bis)
 	 */
 	for (i = 0; i < 7; i++) {
 		/* GPK2[0:6] special function 2 */
-		s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2));
+		s5p_gpio_cfg_pin(&gpio2->k2, i, S5P_GPIO_FUNC(0x2));
 
 		/* GPK2[0:6] drv 4x */
-		s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X);
+		s5p_gpio_set_drv(&gpio2->k2, i, S5P_GPIO_DRV_4X);
 
 		/* GPK2[0:1] pull disable */
 		if (i == 0 || i == 1) {
-			s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE);
+			s5p_gpio_set_pull(&gpio2->k2, i, S5P_GPIO_PULL_NONE);
 			continue;
 		}
 
 		/* GPK2[2:6] pull up */
-		s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP);
+		s5p_gpio_set_pull(&gpio2->k2, i, S5P_GPIO_PULL_UP);
 	}
 	err = s5p_mmc_init(2, 4);
 	return err;
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index e20fb3d..e1d7210 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -391,8 +391,8 @@  static unsigned int get_hw_revision(void)
 
 	/* hw_rev[3:0] == GPE1[3:0] */
 	for (i = 0; i < 4; i++) {
-		s5p_gpio_cfg_pin(&gpio->e1, i, GPIO_INPUT);
-		s5p_gpio_set_pull(&gpio->e1, i, GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(&gpio->e1, i, S5P_GPIO_INPUT);
+		s5p_gpio_set_pull(&gpio->e1, i, S5P_GPIO_PULL_NONE);
 	}
 
 	udelay(1);
@@ -431,7 +431,7 @@  int board_mmc_init(bd_t *bis)
 
 	/* eMMC_EN: SD_0_CDn: GPK0[2] Output High */
 	s5p_gpio_direction_output(&gpio->k0, 2, 1);
-	s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE);
+	s5p_gpio_set_pull(&gpio->k0, 2, S5P_GPIO_PULL_NONE);
 
 	/*
 	 * MMC device init
@@ -446,7 +446,7 @@  int board_mmc_init(bd_t *bis)
 
 	/* T-flash detect */
 	s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf);
-	s5p_gpio_set_pull(&gpio->x3, 4, GPIO_PULL_UP);
+	s5p_gpio_set_pull(&gpio->x3, 4, S5P_GPIO_PULL_UP);
 
 	/*
 	 * Check the T-flash  detect pin
@@ -523,7 +523,7 @@  static void pmic_reset(void)
 		(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
 
 	s5p_gpio_direction_output(&gpio->x0, 7, 1);
-	s5p_gpio_set_pull(&gpio->x2, 7, GPIO_PULL_NONE);
+	s5p_gpio_set_pull(&gpio->x2, 7, S5P_GPIO_PULL_NONE);
 }
 
 static void board_clock_init(void)
@@ -615,12 +615,13 @@  static void board_uart_init(void)
 	 */
 
 	for (i = 0; i < 4; i++) {
-		s5p_gpio_set_pull(&gpio1->a1, i, GPIO_PULL_NONE);
-		s5p_gpio_cfg_pin(&gpio1->a1, i, GPIO_FUNC((i > 1) ? 0x3 : 0x2));
+		s5p_gpio_set_pull(&gpio1->a1, i, S5P_GPIO_PULL_NONE);
+		s5p_gpio_cfg_pin(&gpio1->a1, i, S5P_GPIO_FUNC((i > 1) ?
+				 0x3 : 0x2));
 	}
 
 	/* UART_SEL GPY4[7] (part2) at EXYNOS4 */
-	s5p_gpio_set_pull(&gpio2->y4, 7, GPIO_PULL_UP);
+	s5p_gpio_set_pull(&gpio2->y4, 7, S5P_GPIO_PULL_UP);
 	s5p_gpio_direction_output(&gpio2->y4, 7, 1);
 }
 
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index 9b2770f..45bd12f 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -216,7 +216,7 @@  int board_mmc_init(bd_t *bis)
 
 	/* T-flash detect */
 	s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf);
-	s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP);
+	s5p_gpio_set_pull(&gpio2->x3, 4, S5P_GPIO_PULL_UP);
 
 	/*
 	 * Check the T-flash  detect pin
@@ -390,35 +390,35 @@  void exynos_cfg_lcd_gpio(void)
 
 	for (i = 0; i < 8; i++) {
 		/* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */
-		s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2));
-		s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2));
-		s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2));
+		s5p_gpio_cfg_pin(&gpio1->f0, i, S5P_GPIO_FUNC(2));
+		s5p_gpio_cfg_pin(&gpio1->f1, i, S5P_GPIO_FUNC(2));
+		s5p_gpio_cfg_pin(&gpio1->f2, i, S5P_GPIO_FUNC(2));
 		/* pull-up/down disable */
-		s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE);
-		s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE);
-		s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE);
+		s5p_gpio_set_pull(&gpio1->f0, i, S5P_GPIO_PULL_NONE);
+		s5p_gpio_set_pull(&gpio1->f1, i, S5P_GPIO_PULL_NONE);
+		s5p_gpio_set_pull(&gpio1->f2, i, S5P_GPIO_PULL_NONE);
 
 		/* drive strength to max (24bit) */
-		s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X);
-		s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
-		s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X);
-		s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW);
-		s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X);
-		s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW);
+		s5p_gpio_set_drv(&gpio1->f0, i, S5P_GPIO_DRV_4X);
+		s5p_gpio_set_rate(&gpio1->f0, i, S5P_GPIO_DRV_SLOW);
+		s5p_gpio_set_drv(&gpio1->f1, i, S5P_GPIO_DRV_4X);
+		s5p_gpio_set_rate(&gpio1->f1, i, S5P_GPIO_DRV_SLOW);
+		s5p_gpio_set_drv(&gpio1->f2, i, S5P_GPIO_DRV_4X);
+		s5p_gpio_set_rate(&gpio1->f0, i, S5P_GPIO_DRV_SLOW);
 	}
 
 	for (i = 0; i < f3_end; i++) {
 		/* set GPF3[0:3] for RGB Interface and Data lines (32bit) */
-		s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2));
+		s5p_gpio_cfg_pin(&gpio1->f3, i, S5P_GPIO_FUNC(2));
 		/* pull-up/down disable */
-		s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE);
+		s5p_gpio_set_pull(&gpio1->f3, i, S5P_GPIO_PULL_NONE);
 		/* drive strength to max (24bit) */
-		s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X);
-		s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW);
+
+		s5p_gpio_set_rate(&gpio1->f3, i, S5P_GPIO_DRV_SLOW);
 	}
 
 	/* gpio pad configuration for LCD reset. */
-	s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT);
+	s5p_gpio_cfg_pin(&gpio2->y4, 5, S5P_GPIO_OUTPUT);
 
 	spi_init();
 }
diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c
index 630ee6e..d6650c3 100644
--- a/drivers/gpio/s5p_gpio.c
+++ b/drivers/gpio/s5p_gpio.c
@@ -50,7 +50,7 @@  void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
 {
 	unsigned int value;
 
-	s5p_gpio_cfg_pin(bank, gpio, GPIO_OUTPUT);
+	s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_OUTPUT);
 
 	value = readl(&bank->dat);
 	value &= ~DAT_MASK(gpio);
@@ -61,7 +61,7 @@  void s5p_gpio_direction_output(struct s5p_gpio_bank *bank, int gpio, int en)
 
 void s5p_gpio_direction_input(struct s5p_gpio_bank *bank, int gpio)
 {
-	s5p_gpio_cfg_pin(bank, gpio, GPIO_INPUT);
+	s5p_gpio_cfg_pin(bank, gpio, S5P_GPIO_INPUT);
 }
 
 void s5p_gpio_set_value(struct s5p_gpio_bank *bank, int gpio, int en)
@@ -91,8 +91,8 @@  void s5p_gpio_set_pull(struct s5p_gpio_bank *bank, int gpio, int mode)
 	value &= ~PULL_MASK(gpio);
 
 	switch (mode) {
-	case GPIO_PULL_DOWN:
-	case GPIO_PULL_UP:
+	case S5P_GPIO_PULL_DOWN:
+	case S5P_GPIO_PULL_UP:
 		value |= PULL_MODE(gpio, mode);
 		break;
 	default:
@@ -110,10 +110,10 @@  void s5p_gpio_set_drv(struct s5p_gpio_bank *bank, int gpio, int mode)
 	value &= ~DRV_MASK(gpio);
 
 	switch (mode) {
-	case GPIO_DRV_1X:
-	case GPIO_DRV_2X:
-	case GPIO_DRV_3X:
-	case GPIO_DRV_4X:
+	case S5P_GPIO_DRV_1X:
+	case S5P_GPIO_DRV_2X:
+	case S5P_GPIO_DRV_3X:
+	case S5P_GPIO_DRV_4X:
 		value |= DRV_SET(gpio, mode);
 		break;
 	default:
@@ -131,8 +131,8 @@  void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode)
 	value &= ~RATE_MASK(gpio);
 
 	switch (mode) {
-	case GPIO_DRV_FAST:
-	case GPIO_DRV_SLOW:
+	case S5P_GPIO_DRV_FAST:
+	case S5P_GPIO_DRV_SLOW:
 		value |= RATE_SET(gpio);
 		break;
 	default: