diff mbox series

[Linaro-uefi,edk2-platforms,v2,05/18] Hisilicon/D06: Add more PCIe port INT-x support

Message ID 20190220072837.35058-6-ming.huang@linaro.org
State New
Headers show
Series [Linaro-uefi,edk2-platforms,v2,01/18] Hisilicon/D0x: Add DriverHealthManagerDxe | expand

Commit Message

Ming Huang Feb. 20, 2019, 7:28 a.m. UTC 
Since NVMe riser width is 6*X4, need add the related
port's INT-x support to match OS driver.

Contributed-under: TianoCore Contribution Agreement 1.1
Signed-off-by: Ming Huang <ming.huang@linaro.org>
---
 Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl | 37 +++++++++++++++++++-
 1 file changed, 36 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl b/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl
index 0f2d11bb952b..4d9d9d95be68 100644
--- a/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl
+++ b/Silicon/Hisilicon/Hi1620/Hi1620AcpiTables/Dsdt/Hi1620Pci.asl
@@ -41,11 +41,21 @@  Scope(_SB)
       // adding RPx INTx configure deponds on hardware board topology,
       // if UEFI enables RPx, RPy, RPz... related INTx configure
       // should be added
+      Package () {0x2FFFF,0,0,640},         // INT_A
+      Package () {0x2FFFF,1,0,641},         // INT_B
+      Package () {0x2FFFF,2,0,642},         // INT_C
+      Package () {0x2FFFF,3,0,643},         // INT_D
+
       Package () {0x4FFFF,0,0,640},         // INT_A
       Package () {0x4FFFF,1,0,641},         // INT_B
       Package () {0x4FFFF,2,0,642},         // INT_C
       Package () {0x4FFFF,3,0,643},         // INT_D
 
+      Package () {0x6FFFF,0,0,640},         // INT_A
+      Package () {0x6FFFF,1,0,641},         // INT_B
+      Package () {0x6FFFF,2,0,642},         // INT_C
+      Package () {0x6FFFF,3,0,643},         // INT_D
+
       Package () {0x8FFFF,0,0,640},         // INT_A
       Package () {0x8FFFF,1,0,641},         // INT_B
       Package () {0x8FFFF,2,0,642},         // INT_C
@@ -56,6 +66,11 @@  Scope(_SB)
       Package () {0xCFFFF,2,0,642},         // INT_C
       Package () {0xCFFFF,3,0,643},         // INT_D
 
+      Package () {0xEFFFF,0,0,640},         // INT_A
+      Package () {0xEFFFF,1,0,641},         // INT_B
+      Package () {0xEFFFF,2,0,642},         // INT_C
+      Package () {0xEFFFF,3,0,643},         // INT_D
+
       Package () {0x10FFFF,0,0,640},         // INT_A
       Package () {0x10FFFF,1,0,641},         // INT_B
       Package () {0x10FFFF,2,0,642},         // INT_C
@@ -759,11 +774,21 @@  Device (PCI6)
     // adding RPx INTx configure deponds on hardware board topology,
     // if UEFI enables RPx, RPy, RPz... related INTx configure
     // should be added
+    Package () {0x2FFFF,0,0,640},         // INT_A
+    Package () {0x2FFFF,1,0,641},         // INT_B
+    Package () {0x2FFFF,2,0,642},         // INT_C
+    Package () {0x2FFFF,3,0,643},         // INT_D
+
     Package () {0x4FFFF,0,0,640},         // INT_A
     Package () {0x4FFFF,1,0,641},         // INT_B
     Package () {0x4FFFF,2,0,642},         // INT_C
     Package () {0x4FFFF,3,0,643},         // INT_D
 
+    Package () {0x6FFFF,0,0,640},         // INT_A
+    Package () {0x6FFFF,1,0,641},         // INT_B
+    Package () {0x6FFFF,2,0,642},         // INT_C
+    Package () {0x6FFFF,3,0,643},         // INT_D
+
     Package () {0x8FFFF,0,0,640},         // INT_A
     Package () {0x8FFFF,1,0,641},         // INT_B
     Package () {0x8FFFF,2,0,642},         // INT_C
@@ -774,11 +799,21 @@  Device (PCI6)
     Package () {0xCFFFF,2,0,642},         // INT_C
     Package () {0xCFFFF,3,0,643},         // INT_D
 
+    Package () {0xEFFFF,0,0,640},         // INT_A
+    Package () {0xEFFFF,1,0,641},         // INT_B
+    Package () {0xEFFFF,2,0,642},         // INT_C
+    Package () {0xEFFFF,3,0,643},         // INT_D
+
     Package () {0x10FFFF,0,0,640},         // INT_A
     Package () {0x10FFFF,1,0,641},         // INT_B
     Package () {0x10FFFF,2,0,642},         // INT_C
     Package () {0x10FFFF,3,0,643},         // INT_D
-  })
+
+    Package () {0x12FFFF,0,0,640},         // INT_A
+    Package () {0x12FFFF,1,0,641},         // INT_B
+    Package () {0x12FFFF,2,0,642},         // INT_C
+    Package () {0x12FFFF,3,0,643},         // INT_D
+    })
 
   Method (_CRS, 0, Serialized) {           // Root complex resources, _CRS: current resource setting
     Name (RBUF, ResourceTemplate () {      // Name: 19.6.87, ResourceTemplate: 19.6.111,