@@ -138,6 +138,16 @@ config LEDS_LM3530
controlled manually or using PWM input or using ambient
light automatically.
+config LEDS_LM3532
+ tristate "LCD Backlight driver for LM3532"
+ depends on LEDS_CLASS
+ depends on I2C
+ help
+ This option enables support for the LCD backlight using
+ LM3532 ambient light sensor chip. This ALS chip can be
+ controlled manually or using PWM input or using ambient
+ light automatically.
+
config LEDS_LM3533
tristate "LED support for LM3533"
depends on LEDS_CLASS
@@ -18,6 +18,7 @@ obj-$(CONFIG_LEDS_BD2802) += leds-bd2802.o
obj-$(CONFIG_LEDS_CPCAP) += leds-cpcap.o
obj-$(CONFIG_LEDS_LOCOMO) += leds-locomo.o
obj-$(CONFIG_LEDS_LM3530) += leds-lm3530.o
+obj-$(CONFIG_LEDS_LM3532) += leds-lm3532.o
obj-$(CONFIG_LEDS_LM3533) += leds-lm3533.o
obj-$(CONFIG_LEDS_LM3642) += leds-lm3642.o
obj-$(CONFIG_LEDS_MIKROTIK_RB532) += leds-rb532.o
new file mode 100644
@@ -0,0 +1,595 @@
+// SPDX-License-Identifier: GPL-2.0
+// TI LM3532 LED driver
+// Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <linux/slab.h>
+#include <linux/regmap.h>
+#include <linux/input.h>
+#include <linux/types.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <uapi/linux/uleds.h>
+#include <linux/gpio/consumer.h>
+
+#include <dt-bindings/leds/leds-lm3532.h>
+
+#define LM3532_NAME "lm3532-led"
+
+#define LM3532_REG_OUTPUT_CFG 0x10
+#define LM3532_REG_STARTSHUT_RAMP 0x11
+#define LM3532_REG_RT_RAMP 0x12
+#define LM3532_REG_PWM_A_CFG 0x13
+#define LM3532_REG_PWM_B_CFG 0x14
+#define LM3532_REG_PWM_C_CFG 0x15
+#define LM3532_REG_ZONE_CFG_A 0x16
+#define LM3532_REG_CTRL_A_BRT 0x17
+#define LM3532_REG_ZONE_CFG_B 0x18
+#define LM3532_REG_CTRL_B_BRT 0x19
+#define LM3532_REG_ZONE_CFG_C 0x1a
+#define LM3532_REG_CTRL_C_BRT 0x1b
+#define LM3532_REG_ENABLE 0x1d
+#define LM3532_ALS_CONFIG 0x23
+#define LM3532_REG_ZN_0_HI 0x60
+#define LM3532_REG_ZN_0_LO 0x61
+#define LM3532_REG_ZN_1_HI 0x62
+#define LM3532_REG_ZN_1_LO 0x63
+#define LM3532_REG_ZN_2_HI 0x64
+#define LM3532_REG_ZN_2_LO 0x65
+#define LM3532_REG_ZN_3_HI 0x66
+#define LM3532_REG_ZN_3_LO 0x67
+#define LM3532_REG_MAX 0x7e
+
+/* Contorl Enable */
+#define LM3532_CTRL_A_ENABLE BIT(0)
+#define LM3532_CTRL_B_ENABLE BIT(1)
+#define LM3532_CTRL_C_ENABLE BIT(2)
+
+/* PWM Zone Control */
+#define LM3532_PWM_ZONE_MASK 0x7c
+#define LM3532_PWM_ZONE_0_EN BIT(2)
+#define LM3532_PWM_ZONE_1_EN BIT(3)
+#define LM3532_PWM_ZONE_2_EN BIT(4)
+#define LM3532_PWM_ZONE_3_EN BIT(5)
+#define LM3532_PWM_ZONE_4_EN BIT(6)
+
+/* Brightness Configuration */
+#define LM3532_I2C_CTRL BIT(0)
+#define LM3532_LINEAR_MAP BIT(1)
+#define LM3532_ZONE_MASK (BIT(2) | BIT(3) | BIT(4))
+#define LM3532_ZONE_0 0
+#define LM3532_ZONE_1 BIT(2)
+#define LM3532_ZONE_2 BIT(3)
+#define LM3532_ZONE_3 (BIT(2) | BIT(3))
+#define LM3532_ZONE_4 BIT(4)
+
+#define LM3532_ENABLE_ALS BIT(3)
+#define LM3532_ALS_SEL_SHIFT 6
+
+/* Zone Boundary Register */
+#define LM3532_ALS_WINDOW_mV 2000
+#define LM3532_ALS_ZB_MAX 4
+#define LM3532_ALS_OFFSET_mV 2
+
+#define LM3532_CONTROL_A 0
+#define LM3532_CONTROL_B 1
+#define LM3532_CONTROL_C 2
+#define LM3532_MAX_CONTROL_BANKS 3
+#define LM3532_MAX_LED_STRINGS 3
+
+#define LM3532_OUTPUT_CFG_MASK 0x3
+#define LM3532_BRT_VAL_ADJUST 8
+#define LM3532_RAMP_DOWN_SHIFT 3
+
+/*
+ * struct lm3532_als_data
+ * @config - value of ALS configuration register
+ * @als1_imp_sel - value of ALS1 resistor select register
+ * @als2_imp_sel - value of ALS2 resistor select register
+ * @als_avrg_time - ALS averaging time
+ * @als_input_mode - ALS input mode for brightness control
+ * @als_vmin - Minimum ALS voltage
+ * @als_vmax - Maximum ALS voltage
+ * @zone_lo - values of ALS lo ZB(Zone Boundary) registers
+ * @zone_hi - values of ALS hi ZB(Zone Boundary) registers
+ */
+struct lm3532_als_data {
+ u8 config;
+ u8 als1_imp_sel;
+ u8 als2_imp_sel;
+ u8 als_avrg_time;
+ u8 als_input_mode;
+ u32 als_vmin;
+ u32 als_vmax;
+ u8 zones_lo[LM3532_ALS_ZB_MAX];
+ u8 zones_hi[LM3532_ALS_ZB_MAX];
+};
+
+/**
+ * struct lm3532_led
+ * @led_dev: led class device
+ * @priv - Pointer the device data structure
+ * @control_bank - Control bank the LED is associated to
+ * @mode - Mode of the LED string
+ * @num_leds - Number of LED strings are supported in this array
+ * @led_strings - The LED strings supported in this array
+ * @label - LED label
+ */
+struct lm3532_led {
+ struct led_classdev led_dev;
+ struct lm3532_data *priv;
+
+ int control_bank;
+ int mode;
+ int num_leds;
+ u32 led_strings[LM3532_MAX_CONTROL_BANKS];
+ char label[LED_MAX_NAME_SIZE];
+};
+
+/**
+ * struct lm3532_data
+ * @enable_gpio - Hardware enable gpio
+ * @regulator: regulator
+ * @client: i2c client
+ * @regmap - Devices register map
+ * @dev - Pointer to the devices device struct
+ * @lock - Lock for reading/writing the device
+ * @als_data - Pointer to the als data struct
+ * @runtime_ramp_up - Runtime ramp up setting
+ * @runtime_ramp_down - Runtime ramp down setting
+ * @leds - Array of LED strings
+ */
+struct lm3532_data {
+ struct gpio_desc *enable_gpio;
+ struct regulator *regulator;
+ struct i2c_client *client;
+ struct regmap *regmap;
+ struct device *dev;
+ struct mutex lock;
+
+ struct lm3532_als_data *als_data;
+
+ u32 runtime_ramp_up;
+ u32 runtime_ramp_down;
+
+ struct lm3532_led leds[];
+};
+
+static const struct reg_default lm3532_reg_defs[] = {
+ {LM3532_REG_OUTPUT_CFG, 0xe4},
+ {LM3532_REG_STARTSHUT_RAMP, 0xc0},
+ {LM3532_REG_RT_RAMP, 0xc0},
+ {LM3532_REG_PWM_A_CFG, 0x82},
+ {LM3532_REG_PWM_B_CFG, 0x82},
+ {LM3532_REG_PWM_C_CFG, 0x82},
+ {LM3532_REG_ZONE_CFG_A, 0xf1},
+ {LM3532_REG_CTRL_A_BRT, 0xf3},
+ {LM3532_REG_ZONE_CFG_B, 0xf1},
+ {LM3532_REG_CTRL_B_BRT, 0xf3},
+ {LM3532_REG_ZONE_CFG_C, 0xf1},
+ {LM3532_REG_CTRL_C_BRT, 0xf3},
+ {LM3532_REG_ENABLE, 0xf8},
+ {LM3532_ALS_CONFIG, 0x44},
+ {LM3532_REG_ZN_0_HI, 0x35},
+ {LM3532_REG_ZN_0_LO, 0x33},
+ {LM3532_REG_ZN_1_HI, 0x6a},
+ {LM3532_REG_ZN_1_LO, 0x66},
+ {LM3532_REG_ZN_2_HI, 0xa1},
+ {LM3532_REG_ZN_2_LO, 0x99},
+ {LM3532_REG_ZN_3_HI, 0xdc},
+ {LM3532_REG_ZN_3_LO, 0xcc},
+};
+
+static const struct regmap_config lm3532_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = LM3532_REG_MAX,
+ .reg_defaults = lm3532_reg_defs,
+ .num_reg_defaults = ARRAY_SIZE(lm3532_reg_defs),
+ .cache_type = REGCACHE_FLAT,
+};
+
+static int lm3532_led_enable(struct lm3532_led *led_data)
+{
+ int ctrl_en_val;
+ int ret;
+
+ switch (led_data->control_bank) {
+ case LM3532_CONTROL_A:
+ ctrl_en_val = LM3532_CTRL_A_ENABLE;
+ break;
+ case LM3532_CONTROL_B:
+ ctrl_en_val = LM3532_CTRL_B_ENABLE;
+ break;
+ case LM3532_CONTROL_C:
+ ctrl_en_val = LM3532_CTRL_C_ENABLE;
+ break;
+ default:
+ dev_err(led_data->priv->dev, "Invalid control bank\n");
+ return -EINVAL;
+ };
+
+ ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
+ ctrl_en_val, ctrl_en_val);
+ if (ret) {
+ dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
+ return ret;
+ }
+
+ return regulator_enable(led_data->priv->regulator);
+}
+
+static int lm3532_led_disable(struct lm3532_led *led_data)
+{
+ int ctrl_en_val;
+ int ret;
+
+ switch (led_data->control_bank) {
+ case LM3532_CONTROL_A:
+ ctrl_en_val = LM3532_CTRL_A_ENABLE;
+ break;
+ case LM3532_CONTROL_B:
+ ctrl_en_val = LM3532_CTRL_B_ENABLE;
+ break;
+ case LM3532_CONTROL_C:
+ ctrl_en_val = LM3532_CTRL_C_ENABLE;
+ break;
+ default:
+ dev_err(led_data->priv->dev, "Invalid control bank\n");
+ return -EINVAL;
+ };
+
+ ret = regmap_update_bits(led_data->priv->regmap, LM3532_REG_ENABLE,
+ ctrl_en_val, ~ctrl_en_val);
+ if (ret) {
+ dev_err(led_data->priv->dev, "Failed to set ctrl:%d\n", ret);
+ return ret;
+ }
+
+ return regulator_disable(led_data->priv->regulator);
+}
+
+static int lm3532_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness brt_val)
+{
+ struct lm3532_led *led =
+ container_of(led_cdev, struct lm3532_led, led_dev);
+ u8 brightnes_reg;
+ int ret;
+
+ mutex_lock(&led->priv->lock);
+
+ if (led->mode == LM3532_BL_MODE_ALS) {
+ ret = 0;
+ goto unlock;
+ }
+
+ switch (led->control_bank) {
+ case LM3532_CONTROL_A:
+ brightnes_reg = LM3532_REG_CTRL_A_BRT;
+ break;
+ case LM3532_CONTROL_B:
+ brightnes_reg = LM3532_REG_CTRL_B_BRT;
+ break;
+ case LM3532_CONTROL_C:
+ brightnes_reg = LM3532_REG_CTRL_C_BRT;
+ break;
+ default:
+ dev_err(led->priv->dev, "Invalid control bank\n");
+ ret = -EINVAL;
+ goto unlock;
+ };
+
+ if (brt_val == LED_OFF) {
+ ret = lm3532_led_disable(led);
+ goto unlock;
+ }
+
+ lm3532_led_enable(led);
+ brt_val = brt_val / LM3532_BRT_VAL_ADJUST;
+
+ ret = regmap_write(led->priv->regmap, brightnes_reg, brt_val);
+
+unlock:
+ mutex_unlock(&led->priv->lock);
+ return ret;
+}
+
+static int lm3532_init_registers(struct lm3532_led *led)
+{
+ struct lm3532_data *drvdata = led->priv;
+ unsigned int runtime_ramp_val;
+ unsigned int output_cfg_val = 0;
+ unsigned int output_cfg_shift = 0;
+ unsigned int output_cfg_mask = 0;
+ int ret, i;
+
+ for (i = 0; i < led->num_leds; i++) {
+ output_cfg_shift = led->led_strings[i] * 2;
+ output_cfg_val |= (led->control_bank << output_cfg_shift);
+ output_cfg_mask |= LM3532_OUTPUT_CFG_MASK << output_cfg_shift;
+ }
+
+ ret = regmap_update_bits(drvdata->regmap, LM3532_REG_OUTPUT_CFG,
+ output_cfg_mask, output_cfg_val);
+
+ runtime_ramp_val = drvdata->runtime_ramp_up |
+ (drvdata->runtime_ramp_down << LM3532_RAMP_DOWN_SHIFT);
+
+ return regmap_write(drvdata->regmap, LM3532_REG_RT_RAMP,
+ runtime_ramp_val);
+}
+
+static int lm3532_als_configure(struct lm3532_data *priv)
+{
+ struct lm3532_als_data *als = priv->als_data;
+ u32 als_vmin, als_vmax, als_vstep;
+ int zone_reg = LM3532_REG_ZN_0_HI;
+ int ret;
+ int i;
+
+ als_vmin = als->als_vmin;
+ als_vmax = als->als_vmax;
+
+ als_vstep = (als_vmax - als_vmin) / ((LM3532_ALS_ZB_MAX + 1) * 2);
+
+ for (i = 0; i < LM3532_ALS_ZB_MAX; i++) {
+ als->zones_lo[i] = ((als_vmin + als_vstep + (i * als_vstep)) *
+ LED_FULL) / 1000;
+ als->zones_hi[i] = ((als_vmin + LM3532_ALS_OFFSET_mV +
+ als_vstep + (i * als_vstep)) * LED_FULL) / 1000;
+
+ zone_reg = LM3532_REG_ZN_0_HI + i * 2;
+ ret = regmap_write(priv->regmap, zone_reg, als->zones_lo[i]);
+ if (ret)
+ return ret;
+
+ zone_reg += 1;
+ ret = regmap_write(priv->regmap, zone_reg, als->zones_hi[i]);
+ if (ret)
+ return ret;
+ }
+
+ als->config = (als->als_avrg_time | (LM3532_ENABLE_ALS) |
+ (als->als_input_mode << LM3532_ALS_SEL_SHIFT));
+
+ return regmap_write(priv->regmap, LM3532_ALS_CONFIG, als->config);
+}
+
+static int lm3532_parse_als(struct lm3532_data *priv)
+{
+ struct lm3532_als_data *als;
+ int ret;
+
+ als = devm_kzalloc(priv->dev, sizeof(*als), GFP_KERNEL);
+ if (als == NULL)
+ return -ENOMEM;
+
+ ret = device_property_read_u32(&priv->client->dev, "als-vmin",
+ &als->als_vmin);
+ if (ret)
+ als->als_vmin = 0;
+
+ ret = device_property_read_u32(&priv->client->dev, "als-vmax",
+ &als->als_vmax);
+ if (ret)
+ als->als_vmax = LM3532_ALS_WINDOW_mV;
+
+ ret = device_property_read_u8(&priv->client->dev, "als1-imp-sel",
+ &als->als1_imp_sel);
+ if (ret)
+ als->als1_imp_sel = 0;
+
+ ret = device_property_read_u8(&priv->client->dev, "als2-imp-sel",
+ &als->als2_imp_sel);
+ if (ret)
+ als->als2_imp_sel = 0;
+
+ ret = device_property_read_u8(&priv->client->dev, "als-avrg-time",
+ &als->als_avrg_time);
+ if (ret)
+ als->als_avrg_time = 0;
+
+ ret = device_property_read_u8(&priv->client->dev, "als-input-mode",
+ &als->als_input_mode);
+ if (ret)
+ als->als_input_mode = 0;
+
+ priv->als_data = als;
+
+ return ret;
+}
+
+static int lm3532_parse_node(struct lm3532_data *priv)
+{
+ struct fwnode_handle *child = NULL;
+ struct lm3532_led *led;
+ const char *name;
+ int control_bank;
+ size_t i = 0;
+ int ret;
+
+ priv->enable_gpio = devm_gpiod_get_optional(&priv->client->dev,
+ "enable", GPIOD_OUT_LOW);
+ if (IS_ERR(priv->enable_gpio))
+ priv->enable_gpio = NULL;
+
+ priv->regulator = devm_regulator_get(&priv->client->dev, "vin");
+ if (IS_ERR(priv->regulator))
+ priv->regulator = NULL;
+
+ ret = device_property_read_u32(&priv->client->dev, "ramp-down-ms",
+ &priv->runtime_ramp_up);
+ if (ret)
+ dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
+
+ ret = device_property_read_u32(&priv->client->dev, "ramp-down-ms",
+ &priv->runtime_ramp_down);
+ if (ret)
+ dev_info(&priv->client->dev, "ramp-down-ms property missing\n");
+
+ device_for_each_child_node(priv->dev, child) {
+ led = &priv->leds[i];
+
+ ret = fwnode_property_read_u32(child, "reg", &control_bank);
+ if (ret) {
+ dev_err(&priv->client->dev, "reg property missing\n");
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ if (control_bank > LM3532_CONTROL_C) {
+ dev_err(&priv->client->dev, "Control bank invalid\n");
+ continue;
+ }
+
+ led->control_bank = control_bank;
+
+ ret = fwnode_property_read_u32(child, "ti,led-mode",
+ &led->mode);
+ if (ret) {
+ dev_err(&priv->client->dev, "ti,led-mode property missing\n");
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ if (led->mode == LM3532_BL_MODE_ALS) {
+ ret = lm3532_parse_als(priv);
+ if (ret)
+ dev_err(&priv->client->dev, "Failed to parse als\n");
+ else
+ lm3532_als_configure(priv);
+ }
+
+ led->num_leds = fwnode_property_read_u32_array(child,
+ "led-sources",
+ NULL, 0);
+
+ if (led->num_leds > LM3532_MAX_LED_STRINGS) {
+ dev_err(&priv->client->dev, "To many LED string defined\n");
+ continue;
+ }
+
+ ret = fwnode_property_read_u32_array(child, "led-sources",
+ led->led_strings,
+ led->num_leds);
+ if (ret) {
+ dev_err(&priv->client->dev, "led-sources property missing\n");
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ fwnode_property_read_string(child, "linux,default-trigger",
+ &led->led_dev.default_trigger);
+
+ ret = fwnode_property_read_string(child, "label", &name);
+ if (ret)
+ snprintf(led->label, sizeof(led->label),
+ "%s::", priv->client->name);
+ else
+ snprintf(led->label, sizeof(led->label),
+ "%s:%s", priv->client->name, name);
+
+ led->priv = priv;
+ led->led_dev.name = led->label;
+ led->led_dev.brightness_set_blocking = lm3532_brightness_set;
+
+ ret = devm_led_classdev_register(priv->dev, &led->led_dev);
+ if (ret) {
+ dev_err(&priv->client->dev, "led register err: %d\n",
+ ret);
+ fwnode_handle_put(child);
+ goto child_out;
+ }
+
+ lm3532_init_registers(led);
+
+ i++;
+ }
+
+child_out:
+ return ret;
+}
+
+static int lm3532_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct lm3532_data *drvdata;
+ int ret = 0;
+ int count;
+
+ count = device_get_child_node_count(&client->dev);
+ if (!count) {
+ dev_err(&client->dev, "LEDs are not defined in device tree!");
+ return -ENODEV;
+ }
+
+ drvdata = devm_kzalloc(&client->dev, struct_size(drvdata, leds, count),
+ GFP_KERNEL);
+ if (drvdata == NULL)
+ return -ENOMEM;
+
+ drvdata->client = client;
+ drvdata->dev = &client->dev;
+
+ drvdata->regmap = devm_regmap_init_i2c(client, &lm3532_regmap_config);
+ if (IS_ERR(drvdata->regmap)) {
+ ret = PTR_ERR(drvdata->regmap);
+ dev_err(&client->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ mutex_init(&drvdata->lock);
+ i2c_set_clientdata(client, drvdata);
+
+ ret = lm3532_parse_node(drvdata);
+ if (ret) {
+ dev_err(&client->dev, "Failed to parse node\n");
+ return ret;
+ }
+
+ if (drvdata->enable_gpio)
+ gpiod_direction_output(drvdata->enable_gpio, 1);
+
+ return ret;
+}
+
+static int lm3532_remove(struct i2c_client *client)
+{
+ struct lm3532_data *drvdata = i2c_get_clientdata(client);
+
+ if (drvdata->enable_gpio)
+ gpiod_direction_output(drvdata->enable_gpio, 0);
+
+ return 0;
+}
+
+static const struct of_device_id of_lm3532_leds_match[] = {
+ { .compatible = "ti,lm3532", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_lm3532_leds_match);
+
+static const struct i2c_device_id lm3532_id[] = {
+ {LM3532_NAME, 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, lm3532_id);
+
+static struct i2c_driver lm3532_i2c_driver = {
+ .probe = lm3532_probe,
+ .remove = lm3532_remove,
+ .id_table = lm3532_id,
+ .driver = {
+ .name = LM3532_NAME,
+ .of_match_table = of_lm3532_leds_match,
+ },
+};
+module_i2c_driver(lm3532_i2c_driver);
+
+MODULE_DESCRIPTION("Back Light driver for LM3532");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>");
new file mode 100644
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* TI LM3532 LED driver
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#ifndef __DT_BINDINGS_LEDS_LM3532_H
+#define __DT_BINDINGS_LEDS_LM3532_H
+
+#define LM3532_BL_MODE_MANUAL 0x00 /* "man" */
+#define LM3532_BL_MODE_ALS 0x01 /* "als" */
+
+/* ALS Resistor Select */
+#define LM3532_IMP_HIGH 0x00
+#define LM3532_IMP_37K 0x01
+#define LM3532_IMP_18_5K 0x02
+#define LM3532_IMP_12_33K 0x03
+#define LM3532_IMP_9_25K 0x04
+#define LM3532_IMP_7_4K 0x05
+#define LM3532_IMP_6_17K 0x06
+#define LM3532_IMP_5_29K 0x07
+#define LM3532_IMP_4_63K 0x08
+#define LM3532_IMP_4_11K 0x09
+#define LM3532_IMP_3_7K 0x0a
+#define LM3532_IMP_3_36K 0x0b
+#define LM3532_IMP_3_08K 0x0c
+#define LM3532_IMP_2_85K 0x0d
+#define LM3532_IMP_2_64K 0x0e
+#define LM3532_IMP_2_44K 0x0f
+#define LM3532_IMP_2_31K 0x10
+#define LM3532_IMP_2_18K 0x11
+#define LM3532_IMP_2_06K 0x12
+#define LM3532_IMP_1_95K 0x13
+#define LM3532_IMP_1_85K 0x14
+#define LM3532_IMP_1_76K 0x15
+#define LM3532_IMP_1_68K 0x16
+#define LM3532_IMP_1_61K 0x17
+#define LM3532_IMP_1_54K 0x18
+#define LM3532_IMP_1_48K 0x19
+#define LM3532_IMP_1_42K 0x1a
+#define LM3532_IMP_1_37K 0x1b
+#define LM3532_IMP_1_32K 0x1c
+#define LM3532_IMP_1_28K 0x1d
+#define LM3532_IMP_1_23K 0x1e
+#define LM3532_IMP_1_19K 0x1f
+
+/* ALS Averaging Time */
+#define LM3532_ALS_AVRG_TIME_17_92ms 0x00
+#define LM3532_ALS_AVRG_TIME_35_84ms 0x01
+#define LM3532_ALS_AVRG_TIME_71_68ms 0x02
+#define LM3532_ALS_AVRG_TIME_143_36ms 0x03
+#define LM3532_ALS_AVRG_TIME_286_72ms 0x04
+#define LM3532_ALS_AVRG_TIME_573_44ms 0x05
+#define LM3532_ALS_AVRG_TIME_1146_88ms 0x06
+#define LM3532_ALS_AVRG_TIME_2293_76ms 0x07
+
+/* ALS input select */
+#define LM3532_ALS_INPUT_AVRG 0x00 /* ALS1 and ALS2 input average */
+#define LM3532_ALS_INPUT_ALS1 0x01 /* ALS1 Input */
+#define LM3532_ALS_INPUT_ALS2 0x02 /* ALS2 Input */
+#define LM3532_ALS_INPUT_CEIL 0x03 /* Max of ALS1 and ALS2 */
+
+/* Ramp Times */
+#define LM3532_RAMP_8us 0x00
+#define LM3532_RAMP_1024us 0x01
+#define LM3532_RAMP_2048us 0x02
+#define LM3532_RAMP_4096us 0x03
+#define LM3532_RAMP_8192us 0x04
+#define LM3532_RAMP_16384us 0x05
+#define LM3532_RAMP_32768us 0x06
+#define LM3532_RAMP_65536us 0x07
+
+#endif /* __DT_BINDINGS_LEDS_LM3532_H */
Introduce the Texas Instruments LM3532 White LED driver. The driver supports ALS configurability or manual brightness control. The driver also supports associating LED strings with specific control banks in a group or as individually controlled strings. Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/leds/Kconfig | 10 + drivers/leds/Makefile | 1 + drivers/leds/leds-lm3532.c | 595 +++++++++++++++++++++++++ include/dt-bindings/leds/leds-lm3532.h | 72 +++ 4 files changed, 678 insertions(+) create mode 100644 drivers/leds/leds-lm3532.c create mode 100644 include/dt-bindings/leds/leds-lm3532.h -- 2.20.1.390.gb5101f9297